Triarch 31909 User Manual

ASSEMBLY AND MOUNTING INSTRUCTION

For 31909

Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and
identify all parts prior to building the unit. Each part is identified on the drawingfor reference.

DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item
for any reason. Please repack the unit using the original carton and inserts.

STEP 1:Unpack all the parts and Classify them
according to the illustration shown at the side.
Place the par ts on a sc ratchfr ee surface;

STEP 2: Make sure the power is turned off at
the junction box where the fixtur e i s to be
installed. Secure the cr oss bar t o the ceiling
junction box using junction box scr ews;

STEP 3: Use the wire nuts to connect the
positive and negative wires. connect the
ground wire to the junction box ground port;

Loop

STEP 4: Secure the canopy to the ceiling
with the knurled ring.

STEP 5:Install the Loop to the fixture;

STEP 6: Buckle the quick link to the loop;

STEP 7: Attach the glass shade to the fixture
and fix it using the check ring and the Socket
ring;

STEP 8: Install the corr ect bulb (not provided);

Center Rod