Triarch 31621 User Manual

ITEM NO.: 31621 FOR PENDANT

Assembly Instructions

RUBBER WASHER (I)

STEEL PLATE (J)

HEX NUT (

SPUN (L)

FRAME (M)

COVER (N)

FINIAL (O)

K)

1. Thread the LOOP (A) onto the NIPPLE (B). Until tighten!

2. Thread the NIPPLE (D) onto the COUPLING (C). Secured by the hex nut.

3. Place the TUBING (E) CHECK RING (F) GLASS HOLD (G) & GLASS (H) onto
the distribute! Then secured the glass by the RUBBER WASHER (I) STEEL
PLATE (J) & HEX NUT (K).

4. Place the SPUN (L) FRAME (M) onto the glass.

5. Place the COVER (N) onto the FRAME (M). Then secured by the FINIAL (O).

6. Measure the height from hanging fixture to your ceiling. Cut the excess chain
and wire to fit the height.

7. Follow the wattage label on the socket cover and install correct wattage and type
bulb (no provide) onto the socket.

8. For mounting and wiring step please follow the mounting instruction sheet

enclosed.