Triarch 31604 12lts User Manual

31604 12lts Chandelier Assembling Instruction

1. Unpack the carton and place the fixture on a flat surface. Attention: All necessary
hardware and loose components have been verified for this fixture and are packed inside.
Do not discard inner packing until you have inspected it thoroughly.

2. Thread the LOOP (A) onto the NIPPLE (B). Hang tightens until snug.

3. Put the FIXTURE BODY (K) onto the CENTER HOOK (E) of the CANOPY ASSEMBLY(C).

4. Place GLASS (L) into the GLASS FRAME (M).

5. With the help of another person to hang the bottom hook of HANGER (F) to the GLASS

FRAME (M) then hang onto the SIDE HOOK (D) of the CANOPY ASSEMBLY (C).

Place the SIDE GLASS (I), GLASS HOLDER (H) through the socket onto the BOBECHE (J). Thread the

6.

SOCKET RING (G) onto the socket. Secure the glass by the SOCKET RING (G).

7. Measure the height from hanging fixture to your ceiling. Cut the excess chain and wire to
fit the height. Put the fixture onto the chain

8. Follow the wattage label on the fixture and install proper bulbs (no provided) onto the
sockets.

9. For mounting and wiring step please follow the mounting instruction sheet enclosed.

LOOP (A)

NIPPLE (B)

CANOPY ASSEMBLY(C)

SIDE HOOK(D)

CENTER HOOK(E)

HANGER(F)

SOCKET RING (G)

GLASS HOLDER (H)

SIDE GLASS (I)

BOBECHE (J)

FIXTURE BODY (K)

GLASS (L)

GLASS FRAME (M)