Triad InRoom Classic Gold Center Guide

Classic Gold Center Channel

Dispersion Control Lens Adjustment L.E.D (RED)

1

2

.

0

0

?

Dispersion Control Lens Alignment

TB, BP 4/24/00

the InRoom Classic Gold Center Channel. This mechanism adjusts the DCL from zero to -12
degrees, angled downward to the listening position.

This document will explain the Dispersion Control Lens (DCL) tilting mechanism built into

Remove foam terminal cover

9V

Dispersion Lens Adjustment Screw (#2 Phillips)

1) Place the Center Channel in the desired location.

2) Remove the oval piece of soft foam, that is covering the 9v battery terminal connector, and
attach a 9v battery.

3) Once the battery is connected, locate the bright red LED at the top center of the DCL.

4) Locate the DCL adjustment screw below, and to the right, of the DCL (#2 Phillips).

5)

When sitting in the listening position, you should be able to see the red light. If not, turn the
adjustment screw until you see the red light.

black feet under the rear of the enclosure.)

(Note: If more downward angle is needed, place the larger

6) Once the DCL is correctly aimed, remove the battery and push the connector back into the
enclosure, covering the opening with the soft foam piece removed in step #2.

Standard Phillips #2