T-Rex Tonetrunk 55, Tonetrunk 68 User Manual
USER MANUAL
TONETRUNK
GIGBAG 42
.
GIGBAG 55
.
GIGBAG 68
CONGRATULATIONS
on your purchase of the T-Rex ToneTrunk.
By choosing the T-Rex ToneTrunk you’ve got yourself a good solid pedal
board to keep your pedals in place whenever you use them - or don’t
use them.
You have purchased one of the three models. All three models work
the same way and they all include a slanted aluminum pedal board and
velcro to cover both board and pedals.
GET STARTED
Start by attaching two pieces of the included velcro at the bottom of
your pedals, and attach them to you board – this way you make sure to
keep them in place. Remove any buttons to ensure optimal contact with
the board.
CONNECTING THE POWER SUPPLY
Check your effect units to make sure that the poles match those on the
power supply’s power ports ( This is very important. “Minus” must be on
the centre contact). Plug your boxes into the relevant power ports, connect the power supply to your mains supply and start laying down the
grooves!
Loading...