USER MANUAL
ROOMMATE
JUNIOR
CONGRATULATIONS
on your purchase of the new Room-Mate Junior.
Room-Mate Junior marries cutting-edge digital technology and superior
analogue craftsmanship to deliver a superb vintage reverb sound.
Presenting the newest addition to our successful line of reverb pedals – the Room-Mate Junior – all the best from the original Room-Mate
packed into one incredibly authentic sounding unit.
ROOM-MATE JUNIOR CONTROLS
MODE: Is where it all starts, and you can choose between the following
4 presets:
SPRING: A short spring reverb with low decay settings, a long spring
reverb with high decay settings.
ROOM: Classic room reverb for an adjustable touch of live vibe.
HALL: Gorgeous concert hall reverb you can adjust as you like.
LFO: Reverb embellished with chorus, perfect for acoustic guitar.
DECAY: Controls the length of your reverb trail. Keep it down for a more
subtle, smaller-room effect. Turn it up to sound gigantic!
MIX: controls the blend of clean signal and reverb.
LEVEL: sets the overall volume of your signal out to your amp.
GAIN: lets you turn down the signal coming into your Room-Mate
Junior. This is useful for eliminating input overload distortion when you
position your Room-Mate Junior at the end of a chain of effects or when
you use it in an effects loop, where the signal from you amp is very loud.
On the right side next to the GAIN knob on your Room-Mate Junior,
there is a red LED indicator that lights up when the input signal is too
high.
TECHNICAL SPECIFICATIONS
Input Impedance @ 1KHz Higher than 1M Ohm
Output Impedance @ 1KHZ Lower than 1K Ohm
Power supply 9V DC (T-Rex FuelTank)
Minimum Power supply Voltage 8,5V DC
Maximum Power supply Voltage 12,5V DC
Current Draw @ 9V DC 85mA
Maximum Input signal Vp/p Adjustable
Battery Type 9V battery 6F22
Battery Life 0,5 to 1 Hour
External connectors Input Jack, Output Jack (L), Output Jack
(R), 9V DC jack
Controls On/Off, Level, Mix, Mode, Decay, Input
Gain
Pedal size incl. knobs (W x H x D) 100 x 55 x 120 mm / 3,9 x 2,2 x 4,7 inch
Weight
(excl. battery and packaging) 0,420 kg / 14,8 oz
T-REX WARRANTY CONDITIONS
RoHS
ABOUT T-REX
T-Rex Engineering oers a 2-year guarantee on all our products. In the
unlikely event of a malfunction, please send your product to us in Denmark.
We will then repair or replace your product and send it back to you – free of
charge and usually within 3 weeks.
Please note that we cannot replace a product until we have received it here
in Denmark.
The warranty is lost if the product has been damaged by alteration, misuse,
accident, or neglect; or if the product has been repaired or serviced by
persons not authorized by T-Rex. Read more about warranty conditions at
www.t-rex-eects.com.
Based in Vejle, Denmark, T-Rex Engineering makes classic and signature eects pedals for the world’s best musicians. Our approach
blends hi-tech innovation with old-world craftsmanship – always
in the service of killer tone.
EU REGULATIONS • ENVIRONMENT PROTECTION
T-Rex accepts and follows the regulations and directives issued
by the EU. We nd these environment protecting regulations very
good, and we are happy to follow them.
REACh
ISSUED IN VEJLE, 2012
Lars Dahl-Jørgensen
Development Director
Sebastian Jensen
Production Director
T-Rex Engineering ApS
www.t-rex-eects.com
Loading...