TREX Outdoor Furniture TXC71, Outdoor Furniture TXC47, TXA53 Assembly Instructions Manual

Assembly Instruction Packet

For: TXC71 and TXC47

Sort Boxes

Items are shipped in multible boxes

Sections needed for

SOFA

box - TXC23R
box - TXC23C

box - TXC23L

TXC71

Sections needed for

LOVESEAT

box - TXC23R

box - TXC23L

TXC47

page 1

10/29/2010

Sofa Assembly

1

Layout Parts

Backs

Seat supports

Seats

Back rails

Sideframes

Back Cushion

Qty 3

Seat Cushion

Qty 3

Center legs

2

Layout Hardware

note: you will need hardware pack from TXC23C box

course thread

3" Chair Screw Qty 20

Capnut Qty 6

fine thread

1 1/2" Chair bolt Qty 2

fine thread

3 1/4" Chair bolt Qty 4

front legsback legs

3

Tools Needed

4mm Hex Key ­4mm Hex Bit for screw gun ­Phillips head screwdriver

included

included

page 2

Sofa Assembly

note: use course thread on 1,2,3,4,5

1

2

3

Repeat until all three seats
and backs are assembled

Attach Seat support
using (2) 3” chair screws

4

Left Sideframe and Back rail to Seat

Attach Back to Seat
using (2) 3” chair screws

Attach Sideframe and Back rail
using (4) 3" chair screws

L

L

5

Right Sideframe and Back rail to Seat

R

R

→

Attach Sideframe and Back rail
using (4) 3" chair screws

→

page 3

Sofa Assembly

note: use fine thread bolts for 7, 8, 9

6

Fit all sections together
with Center legs

→

7

Attach small center legs with
(2) 3 1/4" chair bolts and (2) capnuts

8

Attach Rails to Back legs using
(2) 1 1/2" chair bolts and capnuts

9

Attach Seats to Back legs using
(2) 3 1/4" chair bolts and capnuts

10

Put cushions on sofa

Your sofa is assembled!

page 4

Loveseat Assembly

Backs

Seat supports

Seats

1

Layout Parts

Back Cushion

Qty 2

Seat Cushion

Qty 2

Back rails

Sideframes

Center legs

2

Layout Hardware

course thread

3" Chair Screw Qty 16

RL

front legback leg

3

Tools Needed

4mm Hex Key ­4mm Hex Bit for screw gun ­Phillips head screwdriver

included

included

Capnut Qty 3

fine thread

1 1/2" Chair bolt Qty 1

fine thread

3 1/4" Chair bolt Qty 2

page 5

Loveseat Assembly

note: use course thread on 1,2,3,4,5

1

2

3

Repeat until both seats
and backs are assembled

Attach Seat support
using (2) 3” chair screws

4

Left Sideframe and Back rail to Seat

Attach Back to Seat
using (2) 3” chair screws

Attach Sideframe and Back rail
using (4) 3" chair screws

L

L

5

Right Sideframe and Back rail to Seat

R

R

→

Attach Sideframe and Back rail
using (4) 3" chair screws

→

page 6

Loveseat Assembly

note: use fine thread bolts for 7, 8, 9

6

Fit all sections together
with Center legs

→

7

Attach small Center leg with
(1) 3 1/4" chair bolt and (1) capnut

8

Attach Rails to Back leg using
(1) 1 1/2" chair bolt and capnut

9

Attach Seats to Back leg using
(1) 3 1/4" chair bolt and capnut

10

Put cushions on loveseat

Your loveseat is assembled!

page 7

TREX OUTDOOR FURNITURE WARRANTY

Poly-Wood, Inc., (hereinafter “Poly-Wood”), the licensee of Trex® Outdoor Furniture™, warranties to the
original purchaser (“Purchaser”) that, for a period of five (5) years of residential use and one (1) year for
commercial use from the date of original purchase, under normal use and service conditions, Trex Outdoor
Furniture products (other than the cushion, which is covered by the warranty set forth below) shall be free
from material defects in workmanship and materials, and shall not splinter, crack, chip, peel, rot, or suffer
structural damage from insect infestation. If a defect occurs within the warranty period, Purchaser shall
notify dealer originally purchased from and is responsible for providing proof of purchase and a written
description of the defect. Once documentation has been received and evaluated, Poly-Wood’s sole
responsibility shall be, at its option, to repair or replace defective component, to repair or replace defective
furniture, or authorize repairs by a third party, and the Purchaser will be notified of the solution. If product is
not returned within 60 days of date of original purchase, Purchaser is responsible for all shipping charges
that may apply.
This warranty shall not cover and Poly-Wood shall not be responsible for costs and expenses associated
with labor, transportation or assembly. This warranty does not apply to the hardware used to assemble the
furniture.
Poly-Wood does not warrant against and is not responsible for, and no implied warranty shall be deemed to
cover, any condition attributable to: (1) improper assembly and/or failure to abide by the assembly
guidelines for Trex Outdoor Furniture, including any lack of performance or improper performance by the
dealer or assembler; (2) damage resulting from the application of paint, varnish, or other coating or
chemical not approved by Poly-Wood; (3) any lack of compatibility between Trex Outdoor Furniture
products and any other product not manufactured by Poly-Wood that causes damage to or failure of
product; (4) color or pattern variance between any new replacement section or pieces and other sections or
pieces, with Poly-Wood reserving the right to discontinue or modify any product line or color without
notifying the Purchaser (if the original product is not available Poly-Wood retains the right to choose to
provide replacement material of equal value or quality); (5) fading, color change, or color match on any
variegated profiles or accessories; (6) assembly of hardware, accessory items or defects caused by their
assembly; (7) any act of God (such as fire, flooding, hurricane, earthquake, tornado, lightning, ice, etc.),
environmental condition (such as air pollution, mold, mildew, etc.), staining from foreign substances (such
as dirt, grease, oil, etc.), or normal weathering (defined as exposure to sunlight, weather and atmosphere
which may cause any colored surface to gradually fade, darken, chalk, or accumulate dirt or stains); (8)
improper handling, storage, unauthorized repairs or alterations, abuse or neglect of Trex Outdoor Furniture
products by Purchaser or third parties; or (9) ordinary wear and tear.

Trex Outdoor Furniture Cushion Warranty: Poly-Wood warranties to the original purchaser for a period of
thirty (30) days from date of purchase. This warranty covers any defects in the manufacturing and
workmanship of the cushion. This warranty does not apply to normal wear and tear effects on the cushions,
which are received by regular use of the cushions. Neither does it cover damage due to unauthorized repairs
or alterations, negligence, misuse or abuse, improper assembly and acts of God.

No person or entity is authorized by Poly-Wood to make and Poly-Wood shall not be bound by any
statement or representation as to the quality or performance of Trex Outdoor Furniture products other than
as contained in this warranty. This warranty may not be altered or amended except in a written instrument
signed by Poly-Wood and Purchaser.

UNDER NO CIRCUMSTANCES WILL POLY-WOOD BE LIABLE FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, WHETHER SUCH DAMAGES ARE SOUGHT IN CONTRACT, IN TORT
(INCLUDING BUT NOT LIMITED TO NEGLIGENCE AND STRICT LIABLITY) OR OTHERWISE, AND POLY­WOOD’S LIABILITY WITH RESPECT TO DEFECTIVE PRODUCTS SHALL IN NO EVENT EXCEED THE
REPLACEMENT OF SUCH PRODUCTS OR RETURN OF THE PURCHASE PRICE, AS DESCRIBED ABOVE.

Some states do not allow the exclusions or limitations of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may
also have other rights that vary from state to state.

This warranty shall only be applicable and enforceable in the United States of America and Canada.