T-Rex Gull Wah User Manual

USER MANUAL
CONGRATULATIONS
on your purchase of Gull, the most musician-friendly wah-wah out there – and the first pedal in decades to revive the classic yoy­yoy sound.
Gull actually gives you 3 pedals in 1. You get 2 great wah-wahs, plus the dual-filter yoy-yoy effect. You can tune all 3 effects to your tastes, and you can set your pedal up to boost your signal when you switch it on – to make sure your wah never risks going unnoticed.
Be sure to study the overview of controls in this manual. The better you know your Gull, the higher you’ll find it will take you.
GULL CONTROLS
Like most wah-wah units, your Gull is switched on and operated using the PEDAL controller. To turn the unit on or off, press the PEDAL all the way down to activate the ON/OFF button hidden beneath the PEDAL.
Once you’ve switched your Gull, you’ll want to select a mode via the MODE switch. The 3 modes are:
WAH 1: A light wah effect that’s perfect for clean guitar sounds and rhythm parts
WAH 2: A class full-out wah you’ll recognize from history’s great wah­wah solos.
YOY: An unusual effect that uses dual-filter technology to add a subtle, breathy high-frequency modulation to the classic wah.
Now use the SLOPE knob to adjust the character of the frequency band you sweep as you operate the PEDAL. The higher you set the SLOPE knob, the more dramatic the wah.
The BOOST knob is useful tool for making sure you’re wah-wah sound is loud enough in the mix. The higher you set it, the louder you’ll be when you kick your Gull into action.
+ 3 hidden pages