T-Rex Fuel Tank Chameleon User Manual

POWER IT ALL

Congratulations on your purchase of Chameleon, the most versatile Fuel
Tank power supply we’ve ever built.

Chameleon packs all the power you need to make your T-Rex pedals
– and your playing – sound spectacular. And with 4 different voltage
options, it will power just about any pedal that’s ever been dreamed up.

Chameleon is a powerhouse of versatility, but it doesn’t stop there. You
get clean, quiet, isolated power outlets, an amazing 1.500 mA of total
juice, and a big set of custom-made cables. And it’s incredibly easy to
use.

Turn the page for a few tips on how to get the very most out of your
new Fuel Tank Chameleon.

SELECT, PLUG, AND PLAY

TECHNICAL SPECS

Getting started

Chameleon gives you 6 separate outlets for plugging your pedals into.
Here’s how they work:

• Outlets 1–3 can all be used to power either 9V or 12V pedals. For
each outlet, just use the VOLTAGE SELECTOR switches to choose the

voltage you need, plug in your pedal and go!

• Outlet 4 works the same way and gives you a similar choice – except
that it’s between 9V and 18V.

• Outlets 5 and 6 may only be used one at a time. If you use them
both at the same time, you might get some noise. Like outlets 1–3,
outlet 5 gives you a choice between 9V and 12V. Outlet 6 is a 12V AC

outlet for pedals that require AC power.

All the cables you need

Like all T-Rex Fuel Tank power supplies, your new Chameleon comes
with a full set of cables to help you keep your board clutter-free. Once

you’ve selected your voltage options, just plug in and play!

Size: Box cm 160 x 81 x 39 mm (in 6.29 x 3.18 x 1.53)

Weight: Gross weight kg 1.5 (lbs 3.3)

Connections: The Fuel Tank classic has 6 isolated outputs. All 9V and 12V

outlets delivers 300mA. When outlet 4 is switched to
18V DC it delivers 150mA. All outlets are centre negative.

Power supply: Switchable 115V or 230V mains

DC link cables:

2 x 20 cm
3 x 50 cm
2 x 75 cm
2 x 100 cm
1 x dc to mini jack (75cm)
1 x 5-pedal link cable (75cm)

1 x Red cable, AC voltage for the Replica

1 x Blue cable, AC voltage for Line6 pedals