Page 1
Quick Installation Guide
TU2-IDSA
Page 2
Table of Contents
Table of Contents
Español .....................................................................................................
1. Antes de iniciar ..................................................................................
2. Cómo se instala .................................................................................
Troubleshooting ........................................................................................
1
1
2
5
Version 06.05.2006
Page 3
1. Antes de iniciar
Requisitos del sistema
PC con un puerto USB 1.1 ó 2.0 disponible
CPU: 300 MHz o superior
Memoria: 128MB o más
Windows 98SE/ME/2000/XP/2003 Server/MAC OS X
Dispositivo IDE o SATA 1.0a
Aplicación
Contenidos del paquete
TU2-IDSA
Guía de instalación rápida
Convertidor IDE de 2.5” a 3.5”
Adaptador de alimentación AC
Cable de Serial SATA
Cable de alimentación del Disco Duro
USB 2.0 to SATA/IDE Converter Adapter
(TU2-IDSA)
Notebook
SATA Hard Drive
1
Español
CD/DVD ROM
IDE Hard Drive
Page 4
2. Cómo se instala
Nota: Se le recomienda formatear primero el disco duro nuevo. Por favor
refiérase a la pregunta 2 en la guía de resolución de problemas para más
información.
Cómo conectar el Disco SATA
1. Conecte el cable SATA
suministrado al receptáculo SATA
de su disco duro SATA y del
adaptador.
2. Utilice el cable de alimentación
HDD incluido, conecte el extremo
mini de 4-pin al conector DC del
adaptador y el otro extremo del
conector de alimentación hembra
SATA de 15-pin al conector de
alimentación de 15-pin del disco
duro. Luego vaya al paso 5.
Nota: Si su disco duro SATA viene con un conector de alimentación de 4-pin
preexistente, use el conector de alimentación de 4-pin en su lugar. Conecte
tanto el disco duro IDE como el disco duro SATA con un conector de
alimentación preexistente de 4-pin, necesita un cable de alimentación tipo Y de
4-pin para convertir un conector de alimentación de 4-pin individual en un
conector de alimentación de 4-pin dual.
2
Español
Page 5
Cómo conectar el Disco IDE
3. Conecte su dispositivo IDE al
conector IDE del adaptador. Para
conectar un disco duro IDE de 3.5”
ó un disco CD/DVD de 5.25”,
conecte primero el convertidor de
2.5" a 3.5".
4. Si un dispositivo IDE de 3.5” ó
5.25” está conectado, utilice el
cable de alimentación
suministrado, conecte el extremo
mini de 4-pin al conector DC del
adaptador y el extremo hembra de
4-pin grande al conector de
alimentación en el disco IDE.
3
Español
Page 6
5. Conecte el conector de entrada DC
individual del adaptador de
alimentación al jack DC IN en el
adaptador. Después, conecte el
cable de alimentación al adaptador
de alimentación y el otro extremo a
una toma de corriente AC.
Nota: El disco duro conectado al TU2-IDSA debe ser formateado en FAT-16 o
FAT-32 para que Windows 98SE o Windows ME pueda reconocerlo.
Nota: Para los usuarios de Windows 98SE, por favor consulte la pregunta 1 en
la sección de resolución de problemas. Para los usuarios de XP/2000/ME
vaya al paso 6.
6. Conecte el conector USB a un
puerto USB disponible en el PC.
Los controladores se instalarán de
manera automática.
7. Haga doble clic en el icono My
Computer (Mi PC).
8. El disco duro externo (s) debería
mostrarse. Si su disco duro es
nuevo, por favor vaya a la pregunta
3 en la sección de resolución de
problemas.
Español
4
Page 7
Troubleshooting
How do I install the TU2-IDSA on my Windows 98SE machine?
Q1:
First, download the Windows 98SE drivers from . Second, uncompress the drivers.
A1:
If you do not have a compression program such as WinZip, you need to download and install this program
first. Third, double-click on the Setup icon. Click OK when the Setup successful! Window appears.
Fourth, continue on to step 6 in Section 2.
My computer does not recognize the TU2-IDSA. What should I do?
Q2:
First, verify that the computer meets the minimum requirements as listed in section 1. Second, make
A2:
sure that you have plugged in the power into the unit and the power cord into an outlet. Third, try plugging
the device into a different USB slot on your computer.
How do I format my brand new hard drive?
Q3:
For Windows 2000/XP, go to Start -> Settings -> Control Panel -> Administrative Tools ->
A3:
Computer Management -> Disk Management. If the Initialize and Convert Disk Wizard appears, click
Cancel. Right click the Unknown drive, click Initialize and then click OK. Right click on the unallocated
region of the hard drive and select New Partition. Follow the New Partition Wizard instructions then click
Finish. The hard drive will automatically start the formatting process.For Windows 98SE/ME, right click
on My Computer, and then click Device Manager. Double-click on Disk drives, and then double-click on
your hard drive. When the hard drive properties window appears, click on the Settings tab. Check
Removable in the options section, select an available drive letter for Start drive letter and then click OK.
Click Close. Click Yes to restart the computer. Double click on My Computer, double-click on the hard
drive and click Yes to format it.
My computer does not recognize my hard drive(s)? What should I do?
Q4:
First, verify that the device is installed properly. Right click on My Computer Properties. Click on
A4:
Hardware, then Device Manager. Double click on Universal Serial Bus Controllers. Make sure that
USB Mass Storage Device is listed and there is no yellow question mark or exclamation point. Second, if
you are attaching a brand new hard drive, format the drive. Please refer to question 2 for more
information. Third, the hard drive that is connected to the TU2-IDSA must be formatted in FAT-16 or
FAT-32 in order for Windows 98SE or ME to recognize it
Can I connect a SATA drive and an IDE drive simultaneously?
Q5:
Yes. To connect to both IDE hard drive and SATA hard drive with legacy 4-pin power connector, you
A5:
need a 4-pin Y type power cable to convert a single 4-pin power connector into a double 4-pin power
connector.If you still encounter problems or have any questions regarding the TU2-IDSA, please contact
TRENDnet's Technical Support Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause undesired
operation.
www.trendnet.com
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
5
Page 8
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TU2-IDSA
If a product does not operate as warranted above during the applicable warranty period,
TRENDnet shall, at its option and expense, repair the defective product or deliver to
customer an equivalent product to replace the defective item. All products that are
replaced will become the property of TRENDnet. Replacement products may be new or
reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product through any unauthorized service center. This warranty is voided if
(i) the product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable
warranty period for a Return Material Authorization (RMA) number, accompanied by a
copy of the dated proof of the purchase. Products returned to TRENDnet must be preauthorized by TRENDnet with RMA number marked on the outside of the package, and
sent prepaid, insured and packaged appropriately for safe shipment.
- 2-Year Warranty
6
Page 9
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Note: AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1-Year Warranty
7
Page 10
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76
67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
. . . . .
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com
3135 Kashiwa Street
Torrance, CA 90505
USA
Copyright ©2006. All Rights Reserved. TRENDnet.
Loading...