
TI-TPG80
8-Port Industrial EN50155 M12 Gigabit PoE+ Railway
Switch
TI-TPG80 (v1.0R)
• 8 x M12 Gigabit PoE+ ports
• PoE power budget: 200W@48V DC; 100W@24V DC
• EN50155 compliant for rolling stock and railway applications
• Hardened IP40 rated metal housing
• 16Gbps switching capacity
• Includes wall mount brackets
• Operating temperature range of -40° – 75° C (-40° – 167° F)
TRENDnet’s 8-Port Industrial EN50155 M12 Gigabit PoE+ Railway Switch, model TI-TPG80, has eight M12 gigabit PoE+ ports with
a total PoE budget of up to 200W. This M12 railway switch is equipped with an IP40 rated metal enclosure, designed to withstand a
high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial
EN50155 applications. This industrial M12 switch supports an input voltage range from 24 – 56V DC with M23 power interface and
M12 alarm relay interfaces for moving bus, train, and other rolling stock applications. Designed and tested for transportation and
telco applications.
• Dual redundant power inputs with overload current protection
• Alarm relay triggered by power failure
• Power supply sold separately (models: )
• M12 and M23 cables sold separately (models: TI-TCD02 / TITCD06 / TI-TCP02 / TI-TCR02)
•
Limited Lifetime Warranty*

IP40
TI-TPG80
200 Watt
EN50155 Compliant
This M12 switch supports an input voltage
range from 24 – 56V DC with M23 power and
M12 alarm relay interfaces for moving bus,
train, and other rolling stock applications.
NETWORKING SOLUTION
Industrial Design
Equipped with an IP40 rated metal enclosure,
the M12 switch is designed to withstand a high
degree of vibration and shock, while operating
within a wide temperature range of -40° – 75°
C (-40° – 167° F) for industrial environments.
Power over Ethernet (PoE+)
Eight M12 gigabit PoE+ ports deliver up to
30W of PoE+ power per port with a total power
budget of 200W@48V DC, or 100W@24V DC.

FEATURES
TI-TPG80
Power over Ethernet (PoE+)
Eight M12 gigabit PoE+ ports deliver
up to 30W of PoE+ power per port
with a total power budget of
200W@48V DC, or 100W@24V DC
EN50155 Compliance
This industrial M12 switch certified for
rail (EN 50155 / EN 50121-3) and (EN
50155 / EN 50121-4)
Wide Temperature Range
A wide operating temperature range of
-40° – 75° C (-40° – 167° F) allows for
installations in extreme hot or cold
environments
Switching Capacity
16Gbps switching capacity
Shock and Vibration Resistant
Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)
Power
Supports an input voltage range from
24 – 56V DC with M23 power and M12
alarm relay interfaces for moving bus,
train, and other rolling stock
applications.
Jumbo Frame
Sends larger packets, or Jumbo
Frames (up to 10KB), for increased
performance
Wall Mount
IP40 rated metal enclosure, includes
wall mounting brackets for the
industrial M12 switch
Grounding Point
Grounding point protects the M12
switch from external electrical surges

SPECIFICATIONS
TI-TPG80
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 8 x 8-pin M12 Gigabit PoE+ ports
• 1 x 5-pin M23 power port
• 1 x 5-pin M12 relay port
• LED indicators
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10 Mbps (half duplex), 20 Mbps (full
duplex)
• Fast Ethernet: 100 Mbps (half duplex), 200
Mbps (full duplex)
• Gigabit: 2000 Mbps (full duplex)
Performance
• Data RAM Buffer: 2MB
• Switching Fabric: 16Gbps
• MAC Address Table: 11K entries
• Jumbo Frame: 10KB
• Forwarding rate: 11.9Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Built-in M23 interface for redundant power
• Support alarm relay
• Built-in voltage booster for 24V DC
environment
• Auto-Negotiation
• Auto store and forward architecture
• Automatic address learning and address aging
• 6kV ESD protection
DC Power
• Input: 24 – 56V DC
• Max. consumption: 5W (without PoE)
PoE Budget
• 100W @ 24V DC
• 200W @ 48V DC
Alarm Relay Contact
• Relay outputs with current carrying capacity of
1A, 24V DC
• Open circuit mode when P1/P2 are connected
• Short circuit mode when one power source is
connected
MTBF
• 500,000 hours
Housing
• IP40 metal housing
• Wall mount
• Grounding point
• 6kV ESD protection
Operating Temperature
• -40° – 75° C (-40° – 167° F)
Operating Humidity
• Max. 95% non-condensing
Dimensions
• 215 x 170 x 56mm (8.5 x 6.7 x 2.2 in.)
Weight
• 1.32kg (2.9 lbs)
Certifications
• CE
• FCC
• IEC EN 60950-1
• Shock EN 60068-2-27
• Freefall EN 60068-2-32
• Vibration EN 60068-2-6
• RailRoad EN 50155 / EN 50121-3
• RailRoad EN 50155 / EN 50121-4
Warranty
• Limited Lifetime Warranty*
Package Contents
• TI-TPG80
• Quick Installation Guide
• Wall mount kit
TRENDnet offers a limited lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a oneyear warranty.
Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice.
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 3/13/2019