TRENDnet TI-RP262i User Manual

TI-RP262i

26-Port Industrial Gigabit L2 Managed PoE+ Rackmount
Switch

TI-RP262i ((v1.0R))

• 24 x Gigabit PoE+ ports

• 2 x SFP slots

• Supports 100/1000Base-FX fiber SFP modules

• 685W PoE power budget

• PoE alive check restarts unresponsive PoE powered devices

• 52Gbps switching capacity

• Hardened IP30 rated metal housing

• Operating temperature range of -40° – 70° C (-40° – 158° F)

• Supports LACP, STP/RSTP, VLAN, and IGMP Snooping

• IEEE 802.1p QoS with queue scheduling support

TRENDnet's Industrial Gigabit L2 Managed PoE+ Rackmount Switch Series offers advanced layer 2 managed features with
enhanced traffic controls to meet the evolving demands of today's SMB networks. Each industrial layer 2 rackmount switch is
equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a
wide temperature range of -40° – 70° C (-40° – 158° F) for industrial environments. Our industrial layer 2 rackmount switch models
feature copper gigabit ports for high-speed device connections, as well as SFP slots that support 100/1000Base-FX SFP modules for
long distance fiber networking applications. These industrial layer 2 rackmount switches feature a fanless design that eliminates
operating noise and lowers energy consumption.

• CLI (Console / Telnet / SSH), Web (HTTP / HTTPS), SNMP
v1 / 2c / 3 management

• IGMP Snooping / MVR support

• 802.1p / DSCP / Queue Scheduling (SPQ / WRR) QoS
support

• Bandwidth control per port

• Supports Ethernet Ring Protection Switching (ERPS)

• 19” rack mountable metal housing with included mounting kit

• Multiple inputs provide redundant power with overload
current protection

• Power supply sold separately (model: TI-RSP100048)

These Industrial Gigabit L2 Managed PoE+ Rackmount Switch Series provides an intuitive web-based management interface. Each
TRENDnet industrial layer 2 rackmount switch supports advanced traffic management controls, troubleshooting, and SNMP
monitoring. Advanced managed switch features include LACP to group ports together and increase bandwidth between switches,
VLANs for segmenting and isolating virtual LAN groups, QoS to prioritize traffic, port bandwidth controls, SNMP monitoring, and
more, making each TRENDnet industrial layer 2 rackmount switch a powerful solution for SMB networks.

TI-RP262i

L2 Management

Provides an easy to use web management

interface for traffic management controls such

as VLAN, QoS, access controls, link
aggregation, troubleshooting, SNMP

monitoring, and per port MAC restriction.

NETWORKING SOLUTION

PoE Power

A 685W PoE power budget supplies up to 24

Power over Ethernet devices, and includes

advanced PoE port controls, such as enabling /

disabling PoE, power priority, PD alive check,

and power scheduling.

Industrial Design

Equipped with an IP30 rated metal enclosure,

designed to withstand a high degree of

vibration and shock, while operating within a

wide temperature range of -40° – 70° C (-40° –

158° F) for industrial environments.

FEATURES

TI-RP262i

Network Ports

24 x Gigabit PoE+ ports and 2 x SFP
slots allow for a 52Gbps switching
capacity, and 1 x console port (RJ-45
to RS-232) for out-of-band
management

Traffic Management

Managed features include 802.1Q,
IGMP v1 / 2 / 3, IGMP Snooping, per
port bandwidth control / 802.1p /
DSCP / Queue Scheduling (SPQ /
WRR), STP / RSTP, static and
dynamic link aggregation, and ERPS
for flexible network integration

System Monitoring

Monitoring features include SNMP v1 /
v2c / 3, MIB support, SNMP trap,
RMON Groups (1, 2, 3, 9), SMTP
alert, syslog, port mirroring, and
ModBus / TCP

Switching Capacity

52Gbps switching capacity

PoE Power

Industrial layer 2 PoE+ rackmount
switch supplies up to 30W of PoE+
power per port with a 685W total PoE
power budget

Layer 2 Management

Offers IPv4 / IPv6 static or DHCPv4 /
v6 assignment, DHCP server / relay /
option 82, and DHCP server snooping
/ screening to filter out unauthorized
DHCP servers

19” Rackmount

Sturdy rack mountable metal housing
with mounting kit included

Redundant Power

Multiple power inputs are featured on
the industrial layer 2 rackmount switch
with overload current protection
(power supply sold separately: TI­RSP100048)

Full PoE Control Per Port

Available PoE port controls on the
industrial layer 2 PoE+ rackmount
switch include enabling / disabling
PoE, power priority, PD alive check,
and power scheduling

Access Control

Managed access control features
include ACLs, IP-MAC-Port binding,
ARP inspection, 802.1X RADIUS,
MAC address learning, DHCP
snooping, and IP Source Guard
provides layered network access
controls

Fanless Design

Industrial layer 2 rackmount switch
with a fanless design to eliminate
operating noise and lower energy
consumption

Jumbo Frame

Sends larger packets, or Jumbo
Frames (up to 10KB), for increased
performance

Wide Temperature Range

A wide operating temperature range of

-40° – 70° C (-40° – 158° F) allows
the industrial layer 2 rackmount switch
to be installed in extreme hot or cold
environments

Shock and Vibration Resistant

Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)

Grounding Point

Grounding point on the industrial layer
2 rackmount switch protects
equipment from external electrical
surges

SPECIFICATIONS

Standards

• IEEE 802.1d

• IEEE 802.1p

• IEEE 802.1Q

• IEEE 802.1w

• IEEE 802.1X

• IEEE 802.1ab

• IEEE 802.1ax

• IEEE 802.3u

• IEEE 802.3x

• IEEE 802.3ab

• IEEE 802.3az

• IEEE 802.3af

• IEEE 802.3at

Device Interface

• 24 x Gigabit PoE+ ports

• 2 x Gigabit SFP slots

• 1 x Console port (RJ-45)

• Fixed 4-pin power terminal

• LED indicators

• LED Display mode button (toggles LED
indicators to display link/activity or PoE only port
status)

Data Transfer Rate

• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)

• Fast Ethernet: 100Mbps (half duplex), 200Mbps
(full duplex)

• Gigabit Ethernet: 2000Mbps (full duplex)

• SFP: 2000Mbps (full duplex)

Performance

• Switch fabric: 52Gbps

• Data RAM buffer: 512KB

• MAC address table: 8K entries

• Jumbo frames: 10KB

• Forwarding mode: store and forward

• Forwarding rate: 38.7Mpps (64-byte packet size)

Management

• HTTP web-based GUI

• CLI: Telnet / SSHv2

• SNMP v1, v2c, v3

• SNMP trap (up to 5 receivers)

• RMON groups 1/2/3/9

• Device configuration backup & restore, upgrade
firmware, reboot, and reset to default

• Multiple administrative or read-only user
accounts

• Enable or disable power saving mode per port

• Static MAC entries

• Static unicast entries

• LLDP (Link layer discovery protocol)

• Netlite device map

• ONVIF device discovery

• SNTP

• SMTP alert

• Syslog

• Port statistics/utilization

• Traffic monitor

• Port mirror: one to one, many to one

• Storm control: Broadcast, multicast, destination
lookup failure (Min. limit: 1pps)

• Loopback detection

• DHCP relay/option 82

• Modbus/TCP

• ERPS (Ethernet Ring Protection Switching)
G8032v2

MIB

• MIB II RFC 1213

• Bridge MIB RFC 1493

• RMON (Group 1,2,3,9) RFC 2819 RFC 1757

Spanning Tree

• IEEE 802.1d STP (spanning tree protocol)

• IEEE 802.1w RSTP (rapid spanning tree
protocol)

• BPDU filter, guard, and root guard

Link Aggregation

• Static link aggregation and 802.1ax/802.3ad
dynamic LACP (Up to 8 groups)

Quality of Service (QoS)

• 802.1p Class of service (CoS)

• DSCP (Differentiated Services Code Point)

• Bandwidth control per port

• Queue Scheduling: strict priority (SP), weighted
round robin (WRR), weighted fair queuing
(WFQ)

TI-RP262i

VLAN

• 802.1Q tagged VLAN

• MAC-based VLAN

• Port isolation

• Up to 256 VLAN groups, ID range 1-4094

Multicast

• IGMP snooping v1, v2, v3

• IGMP querier

• IGMP fast/immediate leave

• Up to 256 multicast groups

• Static multicast entries

Access Control

• 802.1X authentication (Local user database,
RADIUS, guest VLAN assignment)

• DHCP snooping/screening

• Trusted host/IP access list for management
access

• Port Security/MAC address learning restriction
(Up to 100 entries per port)

• Static/dynamic ARP inspection

ACL

• Source/Destination MAC address

• Source/Destination IP address

• Source Interface

• VLAN ID

• EtherType

• TCP/UDP port 1-65535

Special Features

• Netlite device discovery and map display in GUI

• Port security: MAC address learning restriction
per port

• DHCP relay/option 82 & DHCP server snooping/
screening support

• Wide operating temperature range

• Surge and ESD protection

Power

• Power terminal input: 48 – 57V DC

• Compatible power supply: TI-RSP100048
(1000W) sold separately

• Max. Consumption: 20W (no PoE load); 705W
(full PoE load)

PoE

• PoE budget: 685W @ 48V DC input

• 802.3at: Up to 30W per port

• PoE Mode A: Pins 1, 2, 3, and 6 for power

• PoE auto classification

• PoE port priority/power scheduling/PD alive
check

• Over current/short circuit protection

TI-RP262i

Terminal Block

• Power input, 4 pin

• Wire range: 1.5 mm^2 to 2.5 mm^2

• Solid wire (AWG): 12-18

• Stranded wire (AWG): 12-18

• Wire strip length: 10-11mm

Enclosure

• IP30 rated metal enclosure

• Fanless passive cooling

• Rack mountable 1U

• Grounding point

• ESD (Ethernet) Protection: 8KV DC (Air) 4KV
(Contact)

• Surge (Power) Protection: 1KV DC

TRENDnet offers a lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year
warranty.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

MTBF

• 475,352 hours @ 25° C

• 127,076 hours @ 70° C

Operating Temperature

• -40° – 70° C (-40° – 158° F)

Operating Humidity

• Max. 95% non-condensing

Dimensions

• 440 x 310 x 44mm (17.3 x 12.3 x 1.7 in.)

Weight

• 3.58kg (7.89 lbs.)

Certifications

• CE

• FCC

• Shock (IEC 60068-2-27)

• Freefall (IEC 60068-2-32)

• Vibration (IEC 60068-2-6)

Warranty

• Lifetime Warranty*

Package Contents

• TI-RP262i

• Quick Installation Guide

• Console cable (RJ-45 to RS-232)

• Rackmount Kit

20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com

TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.

Updated: 5/27/2020