TI-PG541i
6-Port Hardened Industrial Gigabit PoE+ Layer 2
Managed DIN-Rail Switch
TI-PG541i (V1.0R)
• Hardened IP30 rated metal enclosure with integrated DIN-Rail mount
• Wide operating temperature range - 40 to 75 °C (-40 to 167 °F)
• 4 x Gigabit PoE+ (802.3at) ports, 1 x Gigabit port, and 1 x Gigabit SFP slot
• 120 Watts total power budget
• Dual redundant power inputs and alarm relay output
• CLI (Telnet), Web (HTTP), SNMP v1/2c management
• 802.1Q/MAC-Based VLAN and IGMP Snooping support
• 802.1p/DSCP/Queue Scheduling (SP/WFQ/WRR) QoS support
• Power supply sold separately (models: 48VDC3000/TI-S24048)
• Limited Lifetime Warranty
TRENDnet’s 6-Port Hardened Industrial Gigabit PoE+ Layer 2 Managed DIN-Rail Switch, model TI-PG541i, has four Gigabit PoE+ ports, one Gigabit
port, one Gigabit SFP slot and a 120 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high
degree of vibration, shock, protection against ESD/EMI/surge, and operate within a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh
environments. L2 management include features such as PoE port control, VLAN, multicast, and QoS which allow for network integration flexibility.
TI-PG541i
Industrial Hardened Design
Equipped with a rugged IP30 rated enclosure
and designed to withstand a high degree of
vibration, shock, protection against ESD/EMI/
surge, and operate with a wide temperature
range (- 40 – 75 °C (- 40 - 167 °F)) for harsh
environments.
Networking Solution
Integration Flexibility
Managed features include PoE per port
control/priority/scheduling/power delay,
802.1Q/MAC-based VLAN, IGMP snooping,
per port bandwidth control/802.1p/DSCP/
queue scheduling, and SNMP trap/RMON/
SMTP alert/syslog/port mirror for monitoring
and flexible network integration.
Fault Tolerance
Features dual redundant power inputs
(Primary and RPS) from external power
sources and an output alarm relay to indicate
the event of input power failure
TI-PG541i
Full PoE+ Power Budget
Supplies up to 30 Watts of PoE/PoE+ power per port
(ports 1-4 802.3at/802.3af) with a 120 Watt PoE
power budget
Network Ports and Capacity
4 x Gigabit PoE+ ports, 1 x Gigabit Port, and 1 x
Gigabit SFP slot allow for a 12Gbps switching
capacity
Integrated DIN-Rail Mount
IP30 rated metal enclosure with integrated DIN-rail
mounting hardware
Full PoE Control Per Port
PoE control features include enabling/disabling PoE
and class, power priority, PD alive check, scheduling,
and power delay per port using CLI or web
management.
L2 Management
Managed features include 802.1Q, /MAC-Based
VLAN, IGMP v1/2/3 Snooping, per port bandwidth
control/802.1p/DSCP/Queue Scheduling (SP/WFQ/
WRR), and Storm Control for flexible network
integration.
System Monitoring
Monitoring features include SNMPv1/v2c, MIB
support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP
alert, syslog, and port mirroring.
Redundant Power
Dual redundant power inputs (primary and RPS) with
overload current protection
Alarm Output
Alarm relay output triggered by power failure of
primary and/or redundant power (DIP switch)
Jumbo Frame
Sends larger packets, or Jumbo Frames (up to 10K)
Wide Temperature
Hardened switch is rated for an operating temperature
range of - 40 to 75 °C (-40 to 167 °F)
Electro Magnetic Compliance
Complies with IEC61000-6-2 EMC generic standard
immunity for industrial environments
Shock and Vibration Resistant
Rated for shock (IEC 60068-2-27), freefall (IEC
60068-2-32), and vibration (IEC 60068-2-6)
LED Indicators
LED indicators convey power, redundant power,
alarm, SFP, PoE, and network port status
Grounding Point
Grounding point protects equipment from external
electrical surges
Specifications
Standards
• IEEE 802.1p
• IEEE 802.1Q
• IEEE 802.1ab
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3z
• IEEE 802.3ab
• IEEE 802.3af
• IEEE 802.3at
• IEEE 802.3az
Device Interface
• 4 x Gigabit PoE+ ports
• 1 x Gigabit port
• 1 x Gigabit SFP slot
• 6-pin removable terminal block (primary/RPS
power inputs & alarm relay output)
• Optional power adapter input (adapter sold
separately)
• DIP switch (Alarm for Primary/RPS power)
• LED indicators
Data Transfer Rate
• Ethernet: 10 Mbps (half-duplex), 20 Mbps (fullduplex)
• Fast Ethernet: 100 Mbps (half-duplex), 200 Mbps
(full-duplex)
• Gigabit Ethernet: 2000 Mbps (full-duplex)
• SX/LX: 2000 Mbps (full-duplex)
Performance
• Switch fabric: 12 Gbps
• RAM buffer: 128 MB
• MAC address table: 8K entries
• Jumbo frames: 10 KB
• Forwarding rate: 8.93 Mpps (64-byte packet size)
Management
• CLI (Telnet)
• HTTP web based GUI
• SNMP v1, v2c
• SNMP trap
• RMON groups 1, 2, 3, 9
• Enable/disable 802.3az power saving
• LLDP
• SNTP
• SMTP alert
• Syslog
• Port statistics/utilization
• Traffic monitor
• Trusted host
• Port mirror (Ingress, Egress, Both)
• Storm control (Multicast, DLF, Broadcast)
MIB
• MIB II RFC 1213
• Bridge MIB RFC 1493
• Ethernet Interface MIB RFC 1643
• RMON MIB RFC 1757
• Power Ethernet MIB RFC 3621
Quality of Service (QoS)
• 802.1p Class of Service (CoS)
• DSCP (Differentiated Services Code Point)
• Bandwidth control per port
• Queue Scheduling: Strict Priority (SP), Weighted
Fair Queuing (WFQ), Weighted Round Robin
(WRR)
VLAN
• 802.1Q tagged VLAN
• MAC-based VLAN
• Port isolation
• Up to 256 VLAN groups, ID range 1-4094
Multicast
• IGMP snooping v1, v2, v3
• Static multicast address
• Up to 256 multicast entries
Special Features
• CLI & web based management
• Full power PoE+
• Wide operating temperature range
• Dual redundant power inputs
• Alarm relay triggered by power failure
• Surge/ESD protection
Power
• PWR (Primary) terminal input: 48 – 57V DC (TIS12048 sold separately)
• RPS (Redundant) terminal input: 48 – 57V DC (TIS12048 sold separately)
• Consumption: 10 Watts (max.), 130 Watts (max.)
with PoE+ fully loaded
Optional Power Adapter (48VDC3000 sold
separately)
• Input: 100 – 240 V AC, 50/60 Hz, 2 A
• Output: 48 V DC, 3.34 A 160 Watts max.
TI-PG541i
Optional Power Supply (TI-S24048 sold
separately)
• Input: 100 – 240 V AC, 50/60 Hz, 1.8 A 125 – 370
V DC
• Output: 240 Watts, 48 V, 5 A
• DIN-rail: TS-35/7.5 or 15
• Operating Temperature: - 25 to 70 °C (- 13 to 158
°F)
PoE
• PoE budget: 120 Watts
• Up to 15 Watts per port for PoE
• Up to 30 Watts per port for PoE+
• Mode A: Pins 1, 2 (V+) and pins 3, 6 (V-)
• PoE enable/disable per port setting, priority,
scheduling, power delay, and PD alive check
Enclosure
• IP30 rated metal enclosure
• DIN-Rail Mount
• Grounding Point
• ESD (Ethernet) Protection: 8KV DC
• Surge (Power) Protection: 6KV DC
MTBF
• 180,136 hrs @ 65 °C
• 435,905 hrs @ 25 °C
Operating Temperature
• - 40 – 75 °C (- 40 - 167 °F)
Operating Humidity
• Max. 95% non-condensing
Dimensions
• 135 x 120 x 31 mm (5.31 x 4.72 x 1.22 in.)
Weight
• 528 g (1.17 lbs.)
Certifications
• CE
• FCC
• Shock (IEC 60068-2-27)
• Freefall (IEC 60068-2-32)
• Vibration (IEC 60068-2-6)
Warranty
• Limited Lifetime Warranty
Package Contents
• TI-PG541i
• Quick Installation Guide
• CD-ROM (User’s Guide)
TRENDnet offers a limited lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year
warranty.
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 6/1/2016
Loading...