TRENDnet TI-PG50F User Manual

TI-PG50F

5-Port Industrial Gigabit PoE+ Wall-Mounted Front
Access Switch

TI-PG50F (v2.0R)

• 4 x Gigabit PoE+ ports

• 1 x Gigabit port

• 120W PoE power budget

• 10Gbps switching capacity

• Supports jumbo frames up to 9KB

• Hardened IP30 rated metal housing

• Includes DIN-Rail bracket and magnetic wall mount kit

• Operating temperature range of -40° – 75° C (-40° – 167° F)

• Redundant power inputs with overload current protection

• Alarm relay triggered by power failure

• Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)

• Lifetime Warranty

TRENDnet’s Industrial Gigabit PoE+ Wall-Mounted Front Access Switch Series are well suited for IP surveillance, IoT, and
automation networks for homes and businesses. These hardened industrial gigabit flat switches provide front access to ports and
power interfaces for easier installation. The flat and compact size make them ideal for cabinet installations where space is limited.
Each hardened industrial front access switch features gigabit PoE+ ports for connecting devices such as wireless access points, IP
cameras, and IoT appliances. These hardened front access switches come equipped with an IP30 rated metal enclosure, designed
to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F)
for industrial environments.

TI-PG50F

Wall-Mounted Front Access

Switch

The wall mountable flat switch provides front

access to ports and power interfaces for easier

installation. It’s flat and compact size make it

ideal for cabinet installations where space is

limited.

NETWORKING SOLUTION

PoE+ Power

A 120W PoE power budget supplies PoE

power from the hardened industrial front

access switch to up to five Power over Ethernet

devices.

Hardened Industrial Design

Equipped with an IP30 rated metal enclosure,

this front access switch is designed to

withstand a high degree of vibration and shock,

while operating within a wide temperature

range of -40° – 75° C (-40° – 167° F) for

industrial environments.

FEATURES

TI-PG50F

Network Ports

4 x Gigabit PoE+ ports and
1 x Gigabit port

Compact

The flat and compact size makes the
front access switch ideal for cabinet
installations where space is limited

Redundant Power

Dual power inputs provide redundant
power with overload current
protection, and an output alarm relay
to indicate input power failure. (power
supply sold separately: TI-S12048, TI­S24048, and 48VDC3000)

Wide Temperature Range

Hardened industrial housing offers a
wide operating temperature range of

-40° – 75° C (-40° – 167° F), allowing
for installations in extreme hot and
cold environments

PoE Power

Supplies up to 30W of PoE+ power
per port with a 120W power budget

Mounting Hardware

Includes DIN-Rail bracket and
magnetic wall mount kit

Alarm Relay

Alarm relay output triggered by power
failure of primary or secondary power
inputs

Shock and Vibration Resistant

Hardened design rated for shock (EN
60068-2-27), freefall (EN 60068-2-32),
and vibration (EN 60068-2-6) for
industrial settings

Hardware Design

Wall mountable hardware design
provides front access to ports and
power interfaces for easier installation

Switching Capacity

10Gbps switching capacity

Jumbo Frames

Sends larger packets, or jumbo frames
(up to 9KB), for increased
performance

Grounding Point

Grounding point protects equipment
from external electrical surges

LED Indicators

Front access switch with LED
indicators that convey power and port
status

SPECIFICATIONS

Standards

• IEEE 802.3

• IEEE 802.3u

• IEEE 802.3ab

• IEEE 802.3x

• IEEE 802.3af

• IEEE 802.3at

Device Interface

• 4 x Gigabit PoE+ ports

• 1 x Gigabit port

• 6-pin removable terminal block

• LED indicators

• DIN-Rail mount

• Wall mount

• Grounding point

Data Transfer Rate

• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)

• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)

• Gigabit: 2000Mbps (full duplex)

Performance

• Data RAM Buffer: 1024KB

• Switching Fabric: 10Gbps

• MAC Address Table: 2K entries

• Jumbo Frame: 9KB

• Forwarding rate: 7.44Mpps (64-byte packet
size)

Special Features

• Hardened components rated for extreme
temperatures

• Dual redundant power inputs

• Auto-Negotiation

• Auto store and forward architecture

• Automatic address learning and address aging

• ESD 8KV support

DC Power

• Input: 48 – 56V DC

• Compatible power supply: TI-S24048 (sold
separately)

• Max. consumption: 5W (no PoE)

AC Power

• Input: 100 – 240V AC, 50/60Hz, 2A

• Compatible power adapter: 48VDC3000 (sold
separately)

• Output: 48V DC, 3.34A 160W max.

PoE

• PoE budget: 120W @56V DC

Terminal Block

• Redundant power inputs, alarm relay contact, 6
pin

• Wire range: 0.34mm^2 to 2.5mm^2

• Solid wire (AWG): 12-24/14-22

• Stranded wire (AWG): 12-24/14-22

• Torque: 5 lb. – In / 0.5Nm / 0.56 Nm

• Wire strip length: 7-8mm

TI-PG50F

Alarm Relay Contact

• Relay outputs with current carrying capacity of
1A, 24V DC

• Open circuit mode when two power sources
are connected

• Short circuit mode when only one power
source is connected

MTBF

• 454,556 hours

Housing

• IP30 metal case

• DIN-Rail mount

• Wall mount

• Magnet mount

• Grounding point

TRENDnet offers a lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year
warranty.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Operating Temperature

• -40° – 75° C (-40° – 167° F)

Operating Humidity

• Max. 95 % non-condensing

Dimensions

• 120 x 145 x 25mm (4.7 x 5.7 x 1 in.)

Weight

• 510g (1.2 lb.)

Certifications

• CE

• FCC

• UL

• Shock (IEC 60068-2-27)

• Freefall (IEC 60068-2-32)

• Vibration (IEC 60068-2-6)

Warranty

• Lifetime

Package Contents

• TI-PG50F

• Quick Installation Guide

• Removable terminal block

• DIN-Rail, wall and magnet mount kit

20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com

TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.

Updated: 4/17/2020