TRENDnet TI-PG50 Installation Guide

TI-PE50
TI-PE80
TI-PG541
TI-PG62
TI-PG62B
TI-PG50
2.24W
5.76W
10W
5.76W
5.76W
5.76W
90W
200W
120W
120W
120W
48 – 56V
48 – 56V
48 – 57V
48 – 56V
12 – 56V
TI-PG80
TI-PG102
TI-PG160
TI-UPG62 (V1.0R)
TI-PG162
TI-PG80B
5.76W
5.67W
13W
5.76W
13W
5.3W
200W
240W
240W
240W
240W
120 – 200W
48 – 56V
48 – 56V
48 – 56V
48 – 56V
48 – 56V
48 – 56V
24 – 56V
TI-UPG62 (V2.0R) 6.2W 240W 52 – 56V
Switch Model Switch Power Consumption
(No PoE Load)
PoE Power Budget DC Input Voltage Range
ENGLISH
Power Supply Model
Supplied
Max. Power
DC Output Type Note
TI-M6024
TI-S12024
TI-S12048
TI-S24048
TI-S48048
48VDC3000
60W
120W
120W
240W
480W
160W
24V / 2.5A
24V / 5A
48V / 2.5A
48V / 5A
48V / 10A
48V / 3.34A
DIN-Rail
DIN-Rail
DIN-Rail
DIN-Rail
DIN-Rail
Power Adapter (4-pin DIN type connector)
Compatible only with TI-PG541 / TI-PG541i / TI-PG62 / TI-PG102 / TI-PG160 / TI-PG162
FRANÇAIS
DEUTSCHESPAÑOL
OK
DL
ENGLISH
FRANÇAIS
DEUTSCHESPAÑOL
ENGLISH
PW1 PW2
1A@24V
V1+ V2-V2+ V1-
OK
DL
OK
DL
GND
OK
DL
OK
DL
+V1- +V2-
V1+ V2-V2+ V1-
GND
FRANÇAIS
DEUTSCHESPAÑOL
ENGLISH
Status
Description
PWR
RPS
ALM
LNK/ACT
1000M
Solid Green Off Solid Green
Solid Red
Solid Green
Power is Connected Power is Not Detected Power is Detected
Power is Not Detected Either PWR or RPS is disconnected
(Based on DIP switch settings)
Connected Data Transmitting / Receiving
Off
Flashing Green
Off
TI-PG541
1000M SFP
POE+, 1, 2, 3, 4
Both PWR and RPS are connected and powered, Dependent on DIP switch settings
Off No Connection Solid Green Off
Connected at 1000M
Connected at 10/100M Solid Green Connected Flashing Green Off
Data Transmitting / Receiving
No Connection
Flashing Green Off
PoE is being detected
No PoE
Solid Green
PoE is connected
FRANÇAIS
DEUTSCHESPAÑOL
Status
Description
PW1
PW2
ERR
LNK
SPD
Solid Green Off Solid Green
Solid Amber
Solid Green
Power is Connected
Power is Not Detected
Power is Detected
Power is Not Detected
Connected only PW1 or PW2
Connected
Data Transmitting / Receiving
Off
Flashing Green
Off
TI-UPG62
SFP (F5,F6)
POE (P1, P2, P3, P4)
Both PW1 and PW2 are connected and powered
Off No Connection Solid Amber Off
Connected at 1000M
Connected at 10/100M Solid Green Connected Flashing Green Off
Data Transmitting / Receiving
No Connection
Flashing Green Off
PoE is being detected
No PoE
Solid Green
PoE is connected
ENGLISH
Status
Description
PW1, P1
PW2, P2, RPS
PW3
RLY
LNK
Solid Green Off Solid Green
Solid Amber
Solid Amber
Power is Detected
Power is Not Detected
Power is Detected
Power is Not Detected
Power is Detected
Connected only PW1, PW2, PW3
Two of the PW1, PW2, PW3 are connected
and powered
Off
Off
Off
TI-PG62
SFP (F5, F6)
PoE
Power is Not Detected
Connected Flashing Green Off
Data Transmitting / Receiving
No Connection Solid Green Connected Flashing Green Off
Data Transmitting / Receiving
No Connection
Flashing Green Off
PoE is being detected
No PoE
Solid Green
PoE is connected
Solid Green
FRANÇAIS
DEUTSCHESPAÑOL
Status
Description
PW1
PW2
ERR
LNK
SPD
Solid Green Off Solid Green
Solid Amber
Solid Green
Power is Detected
Power is Not Detected
Power is Detected
Power is Not Detected
Connected only PW1 or PW2
Connected
Data Transmitting / Receiving
Off
Flashing Green
Off
TI-PG62B
SFP (F5, F6)
POE (P1, P2, P3, P4)
Both PW1 and PW2 are connected and powered
No Connection Solid Amber Off
Connected at 1000M
Connected at 10/100M Solid Green Connected Flashing Green Off
Data Transmitting / Receiving
No Connection
Flashing Green Off
PoE is being detected
No PoE
Solid Green
PoE is connected
Off
ENGLISH
Status
Description
P1
P2
P3
RLY
LINK, LNK/ACT
Solid Green Off Solid Green
Solid Amber
Solid Amber
Power is Detected
Power is Not Detected
Power is Detected
Power is Not Detected
Power is Detected
Connected only PW1 or PW2
Both PW1 and PW2 are connected and powered
Off
Off
Off
TI-PG102
SFP (F9, F10)
PoE
Power is Not Detected
Connection Flashing Green Off
Data Transmitting / Receiving
No Connection Solid Green Connected Flashing Green Off
Data Transmitting / Receiving
No Connection
Flashing Amber Off
PoE is being detected
No PoE
Solid Amber
PoE is connected
Solid Green
FRANÇAIS
DEUTSCHESPAÑOL
Status
Description
PW1
PW2
RLY (TI-PE80, TI-PG80, & TI-PG80B ONLY)
LNK
POE
Solid Green Off Solid Green
Solid Amber
Solid Green
Power is Detected
Power is Not Detected
Power is Detected
Power is Not Detected
Connected only PW1 or PW2
Connected
Data Transmitting / Receiving
Off
Flashing Green
Off
TI-PE50 / TI-PE80 / TI-PG50 / TI-PG80 / TI-PG80B
Both PW1 and PW2 are connected and powered
No Connection Solid Amber Flashing Amber
PoE is connected
PoE is being detected Off
No PoE
Off
ENGLISH
Status
Description
P1
P2
P3
RLAY
LNK
Solid Green Off Solid Green
Solid Amber
Solid Amber
Power is Detected
Power is Not Detected
Power is Detected
Power is Not Detected
Power is Detected
Connected only PW1 or PW2
Both PW1 and PW2 are connected and powered
Off
Off
Off
TI-PG160 / TI-PG162
SFP (F15, F16) (TI-PG162 ONLY)
PoE
Power is Not Detected
Connection Flashing Green Off
Data Transmitting / Receiving
No Connection Solid Green Connected Flashing Green Off
Data Transmitting / Receiving
No Connection
Flashing Amber Off
PoE is being detected
No PoE
Solid Amber
PoE is connected
Solid Green
FRANÇAIS
DEUTSCHESPAÑOL
Certifications
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Waste electrical an electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or Retailer for recycling advice.
Applies to PoE Products Only: This product is to be connected only to PoE networks without routing to the outside plant.
Note
The Manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Advertencia
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria exitente en el pais o zona de instalación.
Technical Support
If you have any questions regarding the product installation, please contact our Technical Support. Toll free US/Canada: 1-855-373-4741 Regional phone numbers available at www.trendnet.com/support
TRENDnet
20675 Manhattan Place Torrance, CA 90501 USA
Copyright © 2019. All Rights Reserved. TRENDnet.
Product Warranty Registration
Please take a moment to register your product online. Go to TRENDnet’s website at:
www.trendnet.com/register
PoE Unmanaged Industrial Switch (V1) / 10.29.2019
Loading...