TI-PG160
16-Port Industrial Gigabit PoE+ DIN-Rail Switch
TI-PG160 (v1.0R)
• 16 x Gigabit PoE+ ports
• 240W PoE power budget
• 32Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-rail and wall mounts
• Operating temperature range of -40° – 75° C (-40° – 167° F)
• Dual redundant power inputs with overload current protection
• Alarm output triggered by power failure
• Power supply sold separately (models: TI-S24048, TI-S48048)
TRENDnet’s 16-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG160, has sixteen gigabit PoE+ ports with a 240W PoE
power budget. Users are able to connect sixteen PoE+ devices to the industrial PoE switch, while still providing two gigabit ports for
additional network connections. The industrial PoE switch is equipped with an IP30 rated metal enclosure, designed to withstand a
high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial
environments.
TI-PG160
PoE Power
A 240W PoE+ power budget supplies up to
sixteen Power over Ethernet devices with
PoE+ power.
NETWORKING SOLUTION
PLC
Fault Tolerance
The industrial PoE switch features dual
redundant power inputs with output alarm
relay.
TI-PG160
Industrial Design
Equipped with a rugged IP30 rated housing,
designed to withstand a high degree of
vibration and shock, and operate within a wide
temperature range of -40 – 75° C (-40 – 167° F).
PLC
SCADA
HOST
LED indicators
16 x Gigabit
PoE+ ports
Optional
power input
metal enclosure
Grounding point
6-pin terminal
block port
6-pin removable
terminal block
IP30 rated
DIN-rail mount
Housing Dimension (mm)
TI-PG160
FEATURES
TI-PG160
PoE+ Power Budget
Supplies up to 30W of PoE/PoE+
power per port on the industrial PoE
switch with a 240W PoE power budget
Switching Capacity
32Gbps switching capacity
Jumbo Frame
Sends larger packets, or Jumbo
Frames (up to 9KB), for increased
performance
Grounding Point
Grounding point on the industrial PoE
switch protects equipment from
external electrical surges
SPECIFICATIONS
Network Ports
Industrial PoE switch with 16 Gigabit
PoE+ ports
Redundant Power
Dual redundant power inputs with
overload current protection (power
supply sold separately models: TIS24048 / TI-S48048)
Extreme Temperatures
Industrial PoE switch rated for an
operating temperature range of -40 –
75° C (-40 – 167° F)
DIN-Rail/Wall Mounts
IP30 rated metal enclosure with
included DIN-rail and wall mount
hardware
Alarm Relay
Alarm relay triggered by power failure
of primary and/or redundant power
Shock and Vibration Resistant
Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 16 x Gigabit PoE+ ports
• 6-pin removable terminal block
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
• Gigabit: 2000Mbps (full duplex)
Performance
• Data RAM Buffer: 512KB
• Switching Fabric: 32Gbps
• MAC Address Table: 8K entries
• Jumbo Frame: 9KB
• Forwarding rate: 23.8Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Dual redundant power inputs
• ESD contact 6kV, air 8kV, and surge 2kV
support
• Low-profile design
DC Power
• Input: 48 – 56V DC
• Recommended power supply: TI-S24048 (sold
separately)
• Max. consumption: 5.76W (no PoE)
Optional Power Adapter (48VDC3000 sold
separately)
• Input: 100 – 240V AC, 50/60Hz, 2A
• Output: 48V DC, 3.34A 160W max.
PoE
• PoE budget: 240W
Terminal Block
• Redundant power inputs, alarm relay contact, 6
pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – In / 0.5Nm / 0.56Nm
• Wire strip length: 7-8mm
Alarm Relay Contact
• Relay outputs with current carrying capacity of
1A, 24V DC
• Open circuit mode when two power sources
are connected
• Short circuit mode when only one power
source is connected
TI-PG160
MTBF
• 699,103 hours
Housing
• IP30 metal case
• DIN-rail mount
• Wall mount
• Grounding point
• 6kV contact protection
• 8kV air protection
• 2kV surge protection
Operating Temperature
• - 40° – 75° C (-40° – 167° F)
Operating Humidity
• Max. 95% non-condensing
Dimensions (L x W x H)
• 155 x 120 x 48mm (6 x 4.7 x 1.9 in.)
Weight
• 500g (17.7 oz.)
Certifications
• CE
• FCC
• UL
• Shock (IEC 60068-2-27)
• Freefall (IEC 60068-2-32)
• Vibration (IEC 60068-2-6)
Warranty
• Lifetime Warranty*
Package Contents
• TI-PG160
• Quick Installation Guide
• Removable terminal block
• DIN-rail and wall mount kit
TRENDnet offers a limited lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a
one-year warranty.
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 6/24/2019
Loading...