TRENDnet TI-PG102F User Manual

TI-PG102F

10-Port Industrial Gigabit PoE+ Wall-Mounted Front
Access Switch

TI-PG102F (v1.0R)

• 8 x Gigabit PoE+ ports

• 2 x Gigabit SFP slots

• 240W PoE power budget

• 20Gbps switching capacity

• Forwarding rate: 14.88Mpps (64-byte packet size)

• Supports jumbo frames up to 10KB

• Hardened IP30 rated metal housing

• Includes DIN-Rail Bracket and magnetic wall mount kit

• Operating temperature range of -40° – 75° C (-40° – 167° F)

• Redundant power inputs with overload current protection

• Alarm relay triggered by power failure

• Power supply sold separately (models: TI-S24048, TI-S48048, and 48VDC3000)

• Lifetime Warranty

TRENDnet's Industrial Gigabit PoE+ Wall-Mounted Front Access Switch Series is well suited for IP surveillance, IoT, and automation
networks for homes and businesses. These hardened industrial gigabit flat switches provide front access to ports and power
interfaces for easier installation. The flat and compact size make them ideal for cabinet installations where space is limited. Each
hardened industrial front access switch features gigabit PoE+ ports for connecting devices, such as wireless access points, IP
cameras, and IoT appliances. These hardened front access switches come equipped with an IP30 rated metal enclosure, designed
to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F)
for industrial environments.

TI-PG102F

Wall-Mounted Front Access

Switch

The wall mountable flat switch provides front

access to ports and power interfaces for easier

installation. It's flat and compact size make it

ideal for cabinet installations where space is

limited.

NETWORKING SOLUTION

PoE+ Power

A 240W PoE power budget supplies PoE

power from the hardened industrial front

access switch to up to eight Power over

Ethernet devices.

Hardened Industrial Design

Equipped with an IP30 rated metal enclosure,

this front access switch is designed to

withstand a high degree of vibration and shock,

while operating within a wide temperature

range of -40° – 75° C (-40° – 167° F) for

industrial environments.

FEATURES

TI-PG102F

Network Ports

8 x Gigabit PoE+ ports, and 2 x
Gigabit SFP Slots

Compact

The flat and compact size makes the
front access switch ideal for cabinet
installations where space is limited

Redundant Power

Dual power inputs provide redundant
power with overload current
protection, and an output alarm relay
to indicate input power failure. (Power
supply sold separately, models: TI­S24048, TI-S48048, and 48VDC3000)

Wide Temperature Range

Hardened industrial housing offers a
wide operating temperature range of

-40° – 75° C (-40° – 167° F), allowing
for installations in extreme hot and
cold environments

PoE Power

Supplies up to 30W of PoE+ power
per port with a 240W power budget

Mounting Hardware

Includes DIN-Rail bracket and
magnetic wall mount kit

Alarm Relay

Alarm relay output triggered by power
failure of primary or secondary power
inputs

Shock and Vibration Resistant

Hardened design rated for shock (EN
60068-2-27), freefall (EN 60068-2-32),
and vibration (EN 60068-2-6) for
industrial settings

Hardware Design

Wall mountable hardware design
provides front access to ports and
power interfaces for easier installation

Switching Capacity

20Gbps switching capacity

Jumbo Frames

Sends larger packets, or jumbo frames
(up to 10KB), for increased
performance

Electro Magnetic Compliance

Complies with industrial EMS
certifications (IEC 61000-4-2) ESD:
Contact: 6kV | Air: 8kV, (IEC
61000-4-4) EFT: Power: 2kV | Signal:
2kV, (61000-4-5) Surge: Power: 2kV |
Signal: 2kV

LED Indicators

Front access switch with LED
indicators that convey power and port
status

SPECIFICATIONS

Standards

• IEEE 802.3

• IEEE 802.3u

• IEEE 802.3ab

• IEEE 802.3x

• IEEE 802.3af

• IEEE 802.3at

Device Interface

• 8 x Gigabit PoE+ ports

• 2 x Gigabit SFP slots (1000Base-FX)

• 6-pin removable terminal block

• LED indicators

• Wall mount

• DIN-Rail mount

• Grounding point

Grounding Point

Grounding point protects equipment
from external electrical surges

Data Transfer Rate

• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)

• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)

• Gigabit: 2000Mbps (full duplex)

• SFP: 2000Mbps (full duplex)

Performance

• Data RAM Buffer: 0.25MB (Change unit of
measure)

• Switching Fabric: 20Gbps

• MAC Address Table: 11K entries

• Jumbo Frame: 10KB

• Forwarding rate: 14.88Mpps (64-byte packet
size)

Special Features

• Hardened components rated for extreme
temperatures

• Redundant power inputs

• Power DIN adapter (sold separately: model
48VDC3000)

• ESD 8kV support

• Low-profile design

DC Power

• Input: 48 – 56V DC

• Recommended power supply: TI-S24048 (sold
separately)

• Max. consumption: 4.8W (no PoE)

Optional Power DIN Adapter (48VDC3000
sold separately)

• Input: 100 – 240V AC, 50/60Hz, 2A

• Output: 48V DC, 3.34A 160W max.

PoE

• PoE budget: 240W

TI-PG102F

Terminal Block

• Redundant power inputs, alarm relay contact,
6-pin

• Wire range: 0.34mm^2 to 2.5mm^2

• Solid wire (AWG): 12-24/14-22

• Stranded wire (AWG): 12-24/14-22

• Torque: 5 lb. – in. / 0.5Nm / 0.56Nm

• Wire strip length: 7-8mm

Alarm Relay Contact

• Relay outputs with current carrying capacity of
1A, 24V DC

• Open circuit mode when two power sources
are connected

• Short circuit mode when only one power
source is connected

MTBF

• 459,123 hours

TRENDnet offers a lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year
warranty.

Housing

• IP30 metal case

• DIN-Rail mount

• Wall mount

• Grounding point

Operating Temperature

• -40° – 75° C (-40° – 167° F)

Operating Humidity

• Max. 95% non-condensing

Dimensions

• 150 x 145 x 23mm (5.9 x 5.7 x 1 in.)

Weight

• 635g (22.5 oz.)

Certifications

• CE

• FCC

• Shock (IEC 60068-2-27)

• Freefall (IEC 60068-2-32)

• Vibration (IEC 60068-2-6)

• IEC 61000-4-2

• IEC 61000-4-4

• IEC 61000-4-5

Warranty

• Lifetime

Package Contents

• TI-PG102F

• Quick Installation Guide

• Removable terminal block

• DIN-Rail and magnetic wall mount kits

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com

TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.

Updated: 5/18/2020