TI-PE50
5-Port Industrial Fast Ethernet PoE+ DIN-Rail Switch
TI-PE50 (v1.0R)
• 4 x Fast Ethernet PoE+ ports
• 1 x Fast Ethernet port
• 90W PoE power budget
• 1Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-Rail mount and wall mount brackets
• Wide operating temperature range of -40° – 75°C (-40° – 167°F)
• Dual inputs provide redundant power with overload current protection
• Power supply sold separately (model: TI-S12048)
• Lifetime Warranty*
TRENDnet’s Industrial Fast Ethernet PoE+ DIN-Rail Switches feature a rugged IP30 rated metal enclosure. These industrial
unmanaged PoE+ switches are designed to withstand a high degree of vibration and shock, while operating in both high and low
temperatures for industrial environments within -40° – 75° C (-40° – 167° F). Redundant power inputs with overload current
protection on each industrial unmanaged PoE+ switch minimizes network downtime.
Installers and integrators can save on equipment costs and reduce installation time with TRENDnet’s Industrial Fast Ethernet
Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. With PoE technology, users only
need one set of cables to deliver both data and power from the industrial unmanaged PoE+ switch. With these industrial unmanaged
PoE+ switches, easily network PoE devices such as high-power wireless access points, PTZ and other advanced IP cameras, VoIP
phone systems, IPTV decoders, access controls, and more.
TI-PE50
PoE+ Power
A 90W PoE+ power budget supplies up to four
Power over Ethernet devices with PoE+ power.
NETWORKING SOLUTION
PLC
Fault Tolerance
The industrial Ethernet switch features dual
redundant power inputs.
TI-PE50
Industrial Hardened Design
Equipped with a rugged IP30 rated housing,
designed to withstand a high degree of
vibration, shock, and operate within a wide
temperature range of -40 – 75°C (-40 –
167°F).
PLC
SCADA
HOST
LED indicators
Fast Ether net port
4 x Fast Ether net
PoE+ ports
4-pin terminal
block port
IP30 rated
metal enclosur e
Grounding point
4-pin r emovable
terminal block
DIN-rail mount