TI-G102
10-Port Hardened Industrial Gigabit DIN-Rail Switch
TI-G102 (v1.0R)
• 8 x Gigabit ports
• 2 x Gigabit RJ-45 / SFP shared ports
• 20Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-rail and wall mounts
• Operating temperature range of -40° – 75°C (-40° – 167°F)
• Dual redundant power inputs with overload current protection
• Alarm output triggered by power failure
• Power supply sold separately (models: TI-M6024 / 48VDC3000)
TRENDnet’s 10-Port Hardened Industrial Gigabit DIN-Rail Switch, model TI-G102, has eight dedicated gigabit ports, plus two gigabit RJ-45 / SFP shared
ports. Users are able to connect eight devices to the switch, while still providing two gigabit ports for additional network connections. The switch is
equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature
range of -40° – 75°C (-40° – 167°F) for industrial environments.
TI-G102
Gigabit Speeds
Ten gigabit ports provide high-speed network
connections to devices, and a 20 Gbps
switching capacity allows data traffic to flow
smoothly, reducing traffic bottlenecks.
Networking Solution
Fault Tolerance
Features dual redundant power inputs with
output alarm relay.
Industrial Hardened Design
Equipped with an IP30 rated metal enclosure,
designed to withstand a high degree of
vibration and shock, while operating within a
wide temperature range of -40° – 75°C (-40° –
167°F) for industrial environments.
TI-G102
Network Ports
8 Gigabit ports plus 2 Gigabit RJ-45 / SFP shared
ports
DIN-Rail / Wall Mounts
IP30 rated metal enclosure with included DIN-rail and
wall mount hardware
Switching Capacity
20 Gbps switching capacity
Redundant Power
Dual redundant power inputs with overload current
protection (power supply sold separately, models: TIM6024 / 48VDC3000)
Alarm Relay
Alarm relay triggered by power failure of primary and /
or redundant power
Jumbo Frame
Sends larger packets, or Jumbo Frames (up to 10
KB), for increased performance
Extreme Temperatures
Industrial switch is rated for an operating temperature
range of -40 – 75°C (-40 – 167°F)
Shock and Vibration Resistant
Rated for shock (EN 60068-2-27), freefall (EN
60068-2-32), and vibration (EN 60068-2-6)
Grounding Point
Grounding point protects equipment from external
electrical surges
Specifications
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3z
• IEEE 802.3x
Device Interface
• 8 x Gigabit ports
• 2 x Gigabit Ethernet ports
• 2 x Shared SFP slots
• 6-pin removable terminal block
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10 Mbps (half duplex), 20 Mbps (full
duplex)
• Fast Ethernet: 100 Mbps (half duplex), 200 Mbps
(full duplex)
• Gigabit: 2000 Mbps (full duplex)
Performance
• Data RAM Buffer: 2048 KB
• Switching Fabric: 20 Gbps
• MAC Address Table: 16 K entries
• Forwarding rate: 14.8 Mpps (64-byte packet size)
Special Features
• Hardened components rated for extreme
temperatures
• Dual redundant power inputs
• Auto-Negotiation
• Auto store and forward architecture
• Automatic address learning and address aging
• ESD 6KV protection
Power
• Input: 12 - 56 V DC
• Compatible power supply: TI-M6024 (sold
separately)
• Consumption: 5.76 W max.
Terminal Block
• Redundant power inputs, alarm relay contact, 6 pin
• Wire range: 0.34 mm^2 to 2.5 mm^2
• Solid wire (AWG): 12-24 / 14-22
• Stranded wire (AWG): 12-24 / 14-22
• Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
• Wire strip length: 7-8 mm
Alarm Relay Contact
• Relay outputs with current carrying capacity of 1 A,
24 V DC
• Open circuit mode when two power sources are
connected
• Short circuit mode when only one power source is
connected
MTBF
• 510,400 hours
TI-G102
Housing
• IP30 metal case
• DIN-rail mount
• Wall mount
• Grounding point
• ESD 6 KV protection
Operating Temperature
• - 40 to 75 °C (-40 to 167 °F)
Operating Humidity
• Max. 95 % non-condensing
Dimensions
• 155 x 120 x 48 mm (6.1 x 4.7 x 1.9 in.)
Weight
• 415 g (1.1 lb)
Certifications
• CE
• FCC
• Shock (EN 60068-2-27)
• Freefall (EN 60068-2-32)
• Vibration (EN 60068-2-6)
Warranty
• 3 year limited
Package Contents
• TI-G102
• Quick Installation Guide
• Removable terminal block
• DIN-rail and wall mount kit
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 2/27/2017
Loading...