
TI-E80
8-Port Industrial Fast Ethernet DIN-Rail Switch
TI-E80 (v1.0R)
• 8 x Fast Ethernet ports
• 1.6Gbps switching capacity
• Forwarding rate: 1.19Mpps (64-byte packet size)
• Hardened IP30 rated metal switch
• Includes DIN-Rail mount and wall mount brackets
• Wide operating temperature range of -40° – 75° C (-40° – 167° F)
• Dual inputs provide redundant power with overload current protection
• Alarm relay triggered by power failure
• Power supply sold separately (model: TI-M6024)
• Fanless design for silent operation
• Lifetime Warranty
TRENDnet’s Industrial Fast Ethernet DIN-Rail Switches feature a rugged IP30 rated metal enclosure. These industrial Ethernet
switches are designed to withstand high levels of vibration and shock, operate in both low and high temperatures for industrial
environments within a -40° – 75° C (-40° – 167° F) wide-temperature range. Redundant power inputs with overload current
protection on each industrial Ethernet switch minimizes network downtime.

TI-E80
Easy Installation
No configuration needed, simply connect
network devices to the industrial Ethernet
switch.
NETWORKING SOLUTION
Redundant Power
The industrial Ethernet switches feature dual
power inputs to provide redundant power with
overload current protection.
Industrial Hardened Design
Equipped with a rugged IP30 rated housing,
and designed to withstand a high degree of
vibration and shock, while operating within a
wide temperature range of -40° – 75° C (-40° –
167° F).

FEATURES
TI-E80
Easy Installation
Industrial Ethernet switches feature a
quick and easy installation process
with an intuitive guided setup
DIN-Rail / Wall Mounts
IP30 rated metal enclosure with DINRail mount and wall mount hardware
included
Shock and Vibration Resistant
Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
Device Interface
• 8 x Fast Ethernet ports
• 6-pin removable terminal block
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
Performance
• Data RAM Buffer: 56KB
• Switching Fabric: 1.6Gbps
• MAC Address Table: 1K entries
• Forwarding rate: 1.19Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Redundant power inputs
• ESD 8kV support
• Low-profile design
Wide Temperature Range
A wide operating temperature range of
-40° – 75° C (-40° – 167° F) allows for
installations in industrial environments
with extreme hot or cold conditions
Redundant Power
Dual power inputs provide redundant
power with overload current protection
(power supply sold separately, model:
TI-M6024)
DC Power
• Input: 12 – 56V DC
• Recommended power supply: TI-M6024 (sold
separately)
• Max. consumption: 3W
Terminal Block
• Redundant power inputs, alarm relay contact,
6-pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – in. / 0.5Nm / 0.56Nm
• Wire strip length: 7-8mm
• Alarm Relay Contact
• Relay outputs with current carrying capacity of
1A, 24V DC
• Open circuit mode when two power sources
are connected
• Short circuit mode when only one power
source is connected
MTBF
• 510,304 hours
Housing
• IP30 metal case
• DIN-Rail mount
• Wall mount
• Grounding point
Operating Temperature
• -40° – 75° C (-40° – 167° F)
Grounding Point
Grounding point on each industrial
Ethernet switch designed to protect
equipment from external electrical
surges
Electro Magnetic Compliance
Complies with industrial EMS
certifications (IEC 61000-4-2) ESD:
Contact: 6kV | Air: 8kV, (IEC
61000-4-4) EFT: Power: 2kV | Signal:
2kV, (61000-4-5) Surge: Power: 2kV |
Signal: 2kV
Operating Humidity
• Max. 95% non-condensing
Dimensions
• 142 x 105 x 37mm (5.6 x 4.1 x 1.5 in.)
Weight
• 486g (17.1 oz.)
Certifications
• CE
• FCC
• UL
• Shock (IEC 60068-2-27)
• Freefall (IEC 60068-2-32)
• Vibration (IEC 60068-2-6)
• IEC 61000-4-2
• IEC 61000-4-4
• IEC 61000-4-5
Warranty
• Lifetime
Package Contents
• TI-E80
• Quick Installation Guide
• Removable terminal block
• DIN-Rail and wall mount kit
TRENDnet offers a lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year
warranty.
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 9/16/2019