TRENDnet TEW-MP2U, TE100-MP2U, TE100-MP1U User Manual
Quick Installation Guide
TE100-MP1U
TE100-MP2U
TEW-MP2U
Table of Contents
Table of Contents
English ......................................... ..............................................................................................................
1. Before You Start ................................................
2. How to Connect .................................................................................................................................
3. Configure the Print Server .................................................................................................................
4. Configure Wireless Settings (TEW-MP2U only) ................................................................................
5. Printing ..............................................................................................................................................
6. Faxing ................................................................................................................................................
7. Scanning ...........................................................................................................................................
8. Storage ..............................................................................................................................................
Troubleshooting ...........................................................................................................................................
................................. ...............................................
1
1
3
4
6
8
10
11
12
14
Version 04.06.07
1. Before You Start
Package Contents
System Requirements
Note:
1. Do not install MFP Server Control Center, connect printer to print server and connect
the computer to the print server until instructed to do so.
2. The MFP Server Control Center must be installed on each computer in order to use
your multi-function printer.
1
English
Application
Multi-Functional
USB 2.0 Printer
54Mbps 802.11g Wireless 2-Port
Multi-Function USB 2.0 Print Server
(TEW-MP2U)
Workstation with
Wireless PCI Adapter
External USB 2.0
Storage Drive
(TEW-423PI)
Internet
Notebook with
Wireless PC Card
(TEW-421PC)
54Mbps 802.11g
Wireless Firewall Router
(TEW-432BRP)
1 or 2 Port 10/100Mbps
USB 2.0 Print Server
(TE100-MP1U/TE100-MP2U)
Cable/DSL 4-Port
Broadband Router
(TW100-S4W1CA)
Multi-Functional
USB 2.0 Printer
External USB 2.0
Storage Drive
English
Multi-Function
Workstations with Fast Ethernet Adapter
(TE100-PCIWN)
2
Cable/DSL Modem
Internet
Cable/DSL
Modem
2. How to Connect
1. Install the printer drivers to your
computer. Then shutdown the
printer and disconnect the printer
from your computer.
Note: Please refer to your printer's manual for printer installation instructions.
2. Connect the Power Adapter to
the Print Server and then to a
power outlet.
3. Connect a RJ-45 network cable
from a Switch/Router to the LAN
port of the Print Server.
4. Connect the USB Printer to the
USB port of the Print Server.
5. Power ON printer.
6. Verify the Power, Link and USB1
or USB2 LEDs are lit on the Print
Server.
English
3
3. Configure the Print Server
1. Insert the Utility CD-ROM into
your computer's CD-ROM Drive
and then click Install Utility.
2. Follow the InstallShield Wizard
instructions. Then click Finish.
3. Click the Print Server and click
Configure Server.
4. Enter the User name and
Password, and then click Login.
User Name: admin
Password: admin
4
English
Loading...