TRENDnet TEW-MP1U User Manual 2
Quick Installation Guide
TEW-MP1U
Table of Contents
English ......................................... ..............................................................................................................
1. Before You Start ................................................
2. How to Install .....................................................................................................................................
3. Configure the Print Server .................................................................................................................
4. Printing ..............................................................................................................................................
5. Faxing ................................................................................................................................................
6. Scanning ...........................................................................................................................................
Troubleshooting ...........................................................................................................................................
................................. ...............................................
1
1
2
3
7
8
9
10
Version 11.16.07
1. Before You Start
Package Contents
EW-MP1U
?T
?Quick Installation Guide
?U
tility CD-ROM
?P
ower Adapter (12V, 1A)
System Requirements
CD-ROM Drive
?
?CPU: 300Mhz or above/ 800Mhz or above (Windows Vista)
? Memory: 256MB RAM or above/ 512MB RAM or above (Window Vista)
? Windows 2000/XP/2003 Server/Vista (32bit)
Note:
1. Do not perform the following unless instructed to do so:
1. Install the utility
2. Connect printer to printer server
3. Connect computer to Print Server
2. The utility must be installed on each computer in order to use your multifunction printer.
Application
1-Port Wireless G Multi-Function
USB Print Server
(TEW-MP1U)
Multi-Functional
USB 2.0 Printer
Wireless G PC Card
Notebook with
(TEW-421PC)
Wireless G
Firewall Router
(TEW-432BRP)
1
English
Workstation with
Wireless G PCI Adapter
(TEW-423PI)
Internet
Cable/DSL Modem
2. How to install
1. Install the printer drivers to your
computer. Then shutdown the
printer and disconnect the printer
from your computer.
Note: Please refer to your printer's manual for printer installation instructions.
2. Connect the Power Adapter to
the Print Server and then to a
power outlet.
3. Connect a RJ-45 network cable
from a Switch/Router to the LAN
port of the Print Server.
4. Connect the USB Printer to the
USB port of the Print Server.
5. Power ON printer.
6. Verify that the Status LED is lit on
the Print Server.
2
English
3. Configure the Print Server
1. Insert the Utility CD-ROM into your
CD-ROM driver. Then click Setup
Wizard.
2. Click Skip.
3. Select the print server and then
click Next.
3
English
Loading...