TRENDnet TEW-637AP User Manual 3

Quick Installation Guide

TEW-637AP

3.01

Table of Contents

English 1

1. Before You Start

2. Hardware Installation 2

Troubleshooting 7

1

Version 04.19.2011

1. Before You Start

Package Contents

TEW-637AP

Ÿ
ŸMulti-Language Quick Installation Guide
ŸCD-ROM (Utility and User's Guide)
ŸPower Adapter (12V DC, 0.5A)
ŸNetwork Cable (0.6m / 2ft.)

System Requirements

Web Browser: Internet Explorer (6 or higher), Firefox 2.0 or higher, Opera,

Ÿ

Chrome, Safari

ŸA computer with a network adapter or wireless adapter properly installed
ŸA router with an available network LAN port
ŸAn available DHCP Server – routers usually have a built-in DHCP server

1

2. Hardware Installation

Note:

1. Locate an optimum location for the Access Point. The best place for the Access Point
is usually at the center of your wireless network.

2. Disable any anti-virus and firewall programs before starting hardware installation.

For Windows Users

1. Insert Utility CD-ROM into your computer's
CD-ROM drive.

2. Click Run Setup.exe.

3. Click Setup Wizard.

4. Click I accept the terms in the License
Agreement and then click Next.

2

5. Connect the provided network cable from a
LAN port on your Router to the LAN port on the
TEW-637AP. Then click Next.

6. Connect a RJ-45 cable from a LAN port on your
Router to the Ethernet port on your computer.

7. Connect the Power Adapter to the Access Point
and then to a power outlet. Verify that the
power switch is set to the on position (EU
version only). Then click Next.

8. Select the TEW-637AP from the list and then
click Configure.

9. Enter a password and then click Login. The
default password is admin.

3