TRENDnet TEW-432BRP, 54Mbps 802.11g Wireless Router User Manual 2

TEW-432BRP
54Mbps 802.11g Wireless Router Quick Installation Guide
Routeur sans file 802,11g 54Mbps
Drahtloser 54 MBit/s 802.11g Router
Kurzanleitung zur Installation
Enrutador inalámbrico 802.11g a 54Mbps
Guía de instalación rápida
Маршрутизатор 54 Мбит/сек 802.11g Wireless
Руководство по быстрой установ
Version 07.15.05
TRENDnet
TRENDware, USA
What's Next in Networking
Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
Table of Contents
English ...................................................................................................................
1. Prepare for Installation ...................................................................................
2. Install Hardware .............................................................................................
3. Configure your AP/Router ..............................................................................
4. Connect your Wireless Adapter to the Router ................................................
5. Test your Connection ....................................................................................
Troubleshooting ......................................................................................................
1
1 3
4 10 12
14
English QIG
1. Prepare for Installation
Thank you for purchasing the TEW-432BRP. This Wireless AP/Router will allow you to securely share your Internet connection, files, and other resources with multiple users.
This guide will help you set up and configure your AP/Router. Following the installation instructions should be quick and easy. If you run into problems, please refer to the Troubleshooting section or the more detailed installation procedures on the User's Guide CD-ROM. If you need further technical support, please visit www.TRENDNET.com or call technical support by phone.
Verify Package Contents
Please make sure you have everything in the box:
TEW-432BRP
TEW-432BRP
54Mbps 802.11g Wireless Router Quick Installation Guide
Routeur sans file 802,11g 54Mbps Guide d'installation rapide
Drahtloser 54 MBit/s 802.11g Router
Kurzanleitung zur Installation
Enrutador inalámbrico 802.11g a 54Mbps
Guía de instalación rápida
Маршрутизатор 54 Мбит/сек 802.11g Wireless
Руководство по быстрой установ
Version 07.15.05
TRENDnet
TRENDware, USA
What's Next in Networking
Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
Quick Installation Guide
User’s Guide CD-ROM
AC Power Adapter (5V, 2.5A)
Verify Equipment
Before installing the AP/Router, you should have:
1. An installed Cable/DSL Modem with an Ethernet Port
2. A Broadband Internet Account
3. A web browser such as Internet Explorer (5.0 or higher) or Netscape
Navigator (4.7 or higher)
4. A network cable for each computer
5. A computer with TCP/IP Protocol and Client for Microsoft Networks
Service installed
1
English
Collect Account Information from Internet Service Provider (ISP)
During the installation of your AP/Router, the configuration utility will ask you to specify your ISP connection type. Therefore, please verify your Cable or DSL Internet broadband connection with your ISP and ensure you have all the information for one of the following connection types:
Dynamic IP Cable Connection
Nothing is required. The IP address will be automatically assigned by your ISP.
Static or Fixed IP Cable Connection
Internet IP Address:____.____.____.____ (eg. 215.24.24.129) Subnet Mask: ____. ____. ____. _____ Gateway IP Address:____.____.____._____ Primary DNS:____.____._____.______ Secondary DNS:_____._____._____.____
PPPoE DSL Connection
Login Name:______________ Password:________________
PPTP DSL Connection
Internet IP Address:____.____.____.____ (eg. 215.24.24.129) Subnet Mask: ____.____.____._____ Gateway IP Address:____.____.____._____ PPTP Server IP:____.____._____._____ Login Name:_______________ Password:_________________
2
English
2. Install Hardware
1. Connect one RJ-45 network cable from the Cable/DSL Modem's Ethernet port to the WAN port on the AP/Router.
2. Connect a different RJ-45 network cable from one of the AP/Router's LAN ports to your computer's network port.
3. Turn on your Cable/DSL modem.
4. Connect the included Power Adapter from your AP/Router to a power outlet;
your AP/Router should turn on.
5. Turn on your computer
TEW-432BRP
3
2
1
Verify Hardware Installation
Verify that the following front panel lights are on: Power, WAN, WLAN, and one LAN port LED for each wired computer connected to the AP/Router.
WLAN
SYSTEM
LAN
POWER
WAN
3
English
3. Configure your AP/Router
The following section will help you configure your AP/Router to connect to the Internet and your PCs. The setup differs and is dependent on the type of Internet connection you have. If you are not sure what type of connection you have, please contact your ISP to obtain the required information, which is listed in the Prepare for Installation section at the beginning of this Quick Installation Guide.
1. Open your web browser, type http://192.168.1.1 in the Address bar, and press Enter.
2. An authentication window will appear. Enter the username and password, and then click OK. By default, the username is “admin”, and the password is “admin.”
NOTE: To reset the password on the AP/Router, refer to the User's Guide CD-ROM.
3. The “LAN Setting” page will appear. Click Wizard.
4
English
4. The “Wireless Router Setup Wizard” will appear. Click Next.
5. If you want to change your password for your router, then type the new password in the Password and Verify Password fields. Click Next.
6. Choose the appropriate Time Zone from the pull down menu, and click Next.
5
English
7. If you want to assign your router to a different network segment, then change the LAN IP Address and Subnet Mask. Make sure that the Range Start and Range End IP addresses match your network segment. Otherwise, click Next.
8. Select your Connection Type from the pull down menu, (Obtain IP
automatically, Fixed IP address, PPPoE, or PPTP) and proceed to the appropriate subset of instructions below.
Obtain IP automatically (DHCP client)
9. Select Obtain IP automatically (DHCP client) as the Connection Type and click Next.
10. Go to step 19.
6
English
Fixed IP Address
11. Select Fixed IP address and click Next.
12. Enter the WAN IP Address, WAN Subnet Mask, WAN Gateway Address and DNS Server provided by your ISP and click Next.
13. Go to step 19.
PPPoE to obtain IP automatically
14. Select PPPoE to obtain IP automatically as the Connection Type and click Next.
7
English
15. Enter your username and password. Click Next.
16. Go to step 19.
PPTP
17. Select PPTP as the Connection Type and click Next.
18. Enter the IP Address, Subnet Mask, Gateway, Server IP, PPTP Account,
and PPTP Password. Click Next.
8
English
19. The recommended settings will be automatically selected for you. You may, however, choose to select a different channel and/or network name (SSID). Click Next.
20. Click Restart.
21. Click Close.
Congratulations!
Installation is now complete.
9
English
4. Connect your Wireless Adapter to the Router
In this example, the TEW-441PC Wireless Utility will connect to the TEW-432BRP.
1. Double-click the Wireless Icon in your system tray.
2. Uncheck Use Windows to configure my wireless network settings and
click OK.
3. Double-click the Wireless Icon in your system tray, click Site Survey, select
the SSID assigned to the TEW-432BRP, and click Connect.
10
English
4. Click Apply.
5. Verify that your wireless adapter connects to the TEW-432BRP successfully.
11
English
5. Test your Connection
Windows 2000/XP
NOTE: You should disconnect the RJ-45 Ethernet cable from your computer's LAN port if you wish to test your wireless connection.
1. Click the Start button; click Run, type “cmd” in the text-field, and press the
Enter key.
2. At the command prompt, type “ipconfig” and press the Enter key.
3. If the application displays an IP address of “192.168.1.x,” your computer is
connected to your access point.
4. Open your web browser, type www.trendnet.com (or another reliable URL)
into the address bar, and press the Enter key. If the website appears, your router is successfully connected to the Internet.
NOTE: If your computer is not obtaining an IP address or is not connecting to the Internet, please retry the steps in the “Configure your AP/Router” section or refer to the troubleshooting section of this Quick Installation Guide.
12
English
Windows 95/98/98SE/98ME
NOTE: You should disconnect the RJ-45 Ethernet cable from your computer's LAN port if you wish to test your wireless connection.
1. Click the Start button; click Run, type “winipcfg” in the text-field, and press
the Enter key.
2. Select your Wireless Network Adapter from the dropdown menu, and the
utility will display your computer's current IP Address information. If the application displays an IP address of “192.168.1.x,” your computer is connecting to your access point.
3. Open your web browser, type www.trendnet.com (or another reliable URL)
into the address bar, and press Enter. If the website appears, your router is connecting to the Internet.
NOTE: If your computer is not obtaining an IP address or is not connecting to the Internet, please retry the steps in the “Configure your AP/Router” section or refer to the troubleshooting section of this Quick Installation Guide.
13
English
Troubleshooting
For help with the TEW-432BRP's configuration and advanced settings, please refer to the User's Guide CD-ROM.
I specified the IP address “192.168.1.1” in my web browser, but an error message says
Q1.
"The page cannot be displayed." How can I get into the TEW-432BRP web configuration page?
Q2.
Q3.
Internet. What should I do?
Please verify your hardware and TCP/IP settings again by following the instructions in
A1.
sections 2-3, make sure the Power, WAN, WLAN and the LAN lights on the AP/Router's front panel are on, and verify that the TCP/IP configuration is correct. Then, try accessing
192.168.1.1 again using your web browser.
I am not sure what type of Internet Account I have for my Cable/DSL connection, How do I find out?
You can simply contact your Internet Service Provider's (ISP) Customer Service or
A2.
Technical Support Department for the correct information.
I set up my Internet connection type and saved it, but I still cannot connect to the
Option 1: On the TEW-432BRP's configuration menu, click the Status tab at the top of
A3.
the page, and then scroll down to the WAN section. Click the WAN IP Release button, and then click the WAN IP Renew button. This will allow the AP/Router to refresh the connection with your ISP. Then, try accessing a website such as http://www.trendnet.com with your Internet browser. Option 2: Turn off your Cable/DSL modem, AP/Router, and your PC. Turn on the Cable/DSL modem, and wait 60 seconds. Then, turn on the AP/Router, followed by your PC. This simple power cycle normally helps the AP/Router find your Internet connection. Then, try browsing a website such as http://www.trendnet.com with your web browser.
Note: For help with the TEW-432BRP's configuration and advanced settings, please refer to the User's Guide CD-ROM.
If you still encounter problems setting up your AP/Router, we can help. Please have your Internet account information ready, (ISP, Account Type) and contact us using the information below.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
14
@
TRENDnet
TRENDware, USA
What's Next in Networking
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDware’s website at http://www.TRENDNET.com
TRENDnet Technical Support
US/Canada Support Center European Support Center
Contact
Telephone: Fax: Email:
Tech Support Hours
7:30am - 6:00pm Pacific Standard Time Monday - Friday
1(310) 626-6252
1(310) 626-6267
support@trendnet.com
TRENDware International, Inc.
3135 Kashiwa Street. Torrance, CA 90505
Contact
Telephone
Deutsch : +49 (0) 6331 / 268-460 Français : +49 (0) 6331 / 268-461 Español : +49 (0) 6331 / 268-462 English : +49 (0) 6331 / 268-463 Italiano : +49 (0) 6331 / 268-464 Dutch : +49 (0) 6331 / 268-465
+49 (0) 6331 / 268-466
Fax:
Tech Support Hours
8:00am - 6:00pm Middle European Time Monday - Friday
http://www.TRENDNET.com
Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
Loading...