Trendnet TE-R4 DATA SHEET

TE-R4

4-Port Ethernet Repeater (4 BNC + 4 AUI)

The TE-R4 Ethernet repeater comply to IEEE 802.3 standard. It
enables you to join Ethernet cable segments to extend the length of
the network trunk line. It can also be used to connect more
computers to your network. Since there is a limit on the number of
computers allowed on each cable segment, you can cut the
segment into two, and then join them with an Ethernet Repeater.
This will allow more computers to be added to each network
segment.

The TE-R4 Ethernet repeater auto-partitions each port. If a problem
occurs to one of the segments, the TE-R4 will automatically isolate
the segment, therefore will not effect the operations of the other
segments.

TRENDnet

TRENDware, USA

What's Next in Networking

FEATURES

Complies with IEEE 802.3 standards

Support BNC and AUI connections

Automatic partitioning

LEDs for easy troubleshooting

10Mbps transfer rate

5 Year Warranty

SPECIFICATIONS

Standards:

IEEE 802.3 10Base-2 and 10Base-5

•

Connectors:

4 BNC and 4 AUI

•

Dimensions:

441mm x 123mm x 45mm

•

PRODUCT INFORMATION

TE-R2

2-Port Ethernet Repeater
(2 BNC + 2 AUI)

TE-R4

4-Port Ethernet Repeater
(4 BNC +4 AUI)

ORDERING INFORMATIONORDERING INFORMATION

TRENDware International, Inc.

3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: [phone]
Fax: [phone]

www.TRENDNET.com

Web:
Email: [e-mail]

To Order Please Call:

1-888-326-6061

TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this

document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit

Copyright TRENDware International, Inc. 2004. All Rights Reserved.

©

http://www.TRENDNET.com.

____________________