TRENDnet TEG-S80Dg User Manual

Quick Installation Guide

TEG-S80Dg

1.01

Table of Contents

English 1

1. Before You Start

2. Hardware Installation 2
LEDs

3. 3

1

Technical Specifications
Troubleshooting

4
5

Version 08.21.2009

1. Before You Start

Package Contents

TEG-S80Dg

?

ENGLISHFRANÇAISDEUTSCHESPAÑOL

System Requirements

?Computer with Network adapter installed
?CAT-5e or CAT-6 Network Cable

The surface must support at least 1.5 Kg for the Switch

?

The power outlet should be within 1.82 meters (6 feet) of the Switch

?

Visually inspect the DC power jack to make sure that it is securely connected to the

?

power adapter
Make sure that there is proper heat dissipation from and adequate ventilation

?

around the Switch

Do not place heavy objects on the Switch

?

?Multi-Language Quick Installation Guide
?Power Cord
?Rubber Feet

РУССКИЙ

1

2. Hardware Installation

1. Connect the Power Cord to the TEG-S80Dg

and then to a power outlet.

2. Connect a CAT-5e or CAT-6 RJ-45 network
cable from the computer to an available
Ethernet port on the TEG-S80Dg.

ENGLISHFRANÇAISDEUTSCHESPAÑOL

РУССКИЙ

2