TRENDnet TEGS50G User Manual
Quick Installation Guide
TEG-S50g
TEG-S80g
H/W: V1
Table of Contents
Table of Contents
English ......................................................................................................
1. Before You Start
2. Hardware Installation .........................................................................
3. LEDs ..................................................................................................
Technical Specifications .............................................................................
Troubleshooting ..........................................................................................
.................................................................................
1
1
3
4
6
8
Version 11.14.2008
1. Before You Start
Package Contents
? TEG-S50g/TEG-S80g
? Quick Installation Guide
? AC Power Adapter (7.5V DC, 1A)
Installation Requirements
? A computer with a network adapter installed
? Cat-5e or Cat-6 Network Cable
The surface must support at least 1.5 Kg for the Switch
?
The power outlet should be within 1.82 meters (6 feet) of the Switch
?
Visually inspect the DC power jack to make sure that it is securely
?
connected to the power adapter
Make sure that there is proper heat dissipation from and adequate
?
ventilation around the Switch
Do not place heavy objects on the Switch
?
1
English
Application
1
Delivers less power
to unused ports
TEG-S50g
less power
2
Delivers less power
when devices are off
less power
off
3
Delivers less power
with shorter
cable lengths
*Max power savings compared with standard TRENDnet switches.
GREENnet
Switch
Regular
Switch
TEG-S80g
1
Delivers less power
to unused ports
less power
2
Delivers less power
when devices are off
less power
off
3
Delivers less power
with shorter
cable lengths
*Max power savings compared with standard TRENDnet switches.
GREENnet
Switch
Regular
Switch
20m
20m
20m
20m
Full Power
Full Power
60m
60m
60m
60m
on on
on on
100m
100m
on on
on on
100m
100m
2
English
2. Hardware Installation
1. Connect the AC Power Adapter to
the TEG-S50g/TEG-S80g and then
to a power outlet.
2. Connect a CAT-5e or CAT-6 RJ-45
network cable from the computer to
an available Ethernet port of the
TEG-S50g/TEG-S80g.
3
English
Loading...