24-Port 10/100Mbps SNMP Switch with
Gigabit Module Slot
TEG-S2400i
TRENDnet's TEG-2400i is a high performance web-managed
SNMP Layer 2 Switch that provides users with 24 10/100Mbps Fast
Ethernet ports and one Gigabit module slot. The module slot
accepts either copper or fiber media module, which offers
connection to Gigabit Server or Gigabit backbone with flexibility.
With the Web Browser configuration feature, users can easily install
and configure the Switch. The TEG-S2400i supports both PortBased and Tag-Based VLAN, and the trunking feature delivers more
bandwidth than regular uplink between Switches. TRENDnet’s
TEG-S2400i is powerful and easy-to-use in reducing unnecessary
broadcast traffic and enhancing network security.
FEATURES
BENEFITS
• 24 10/100Mbps Auto-Negotiation Ethernet/Fast Ethernet Ports
• Gigabit Module Slot; supports the following optional Modules: 1-Port 100Base-FX, 2-Port 100Base-FX, 2-Port Copper Gigabit, 1-Port Fiber
Gigabit, or 2-Port Fiber Gigabit
• Full/Half-duplex transfer mode for each 10/100Mbps port (1000Mbps port supports only at full-duplex mode)
• Auto-MDIX media type detection for all ports
• Supports store-and-forward switching architecture with non-blocking wire-speed performance
• IEEE 802.3x flow control for full-duplex and collision-based back pressure function for half-duplex operation
• 14K MAC addresses and 4K VLAN entries per device
• 3MB packet buffer and 1MB control buffer per device
• 8.8 Gbps Backplane speed
• Broadcast storm filtering and Head-of-Line blocking prevention
• Supports Port-Based VLAN (26 Groups), IEEE 802.1Q Tag-Based VLAN, and IEEE 802.1P Port-Based Quality of Service (QoS)
• Supports Port-Trunking (7 trunk groups with maximum of 4 ports per group)
• Supports IP Multicast, IGMP Snooping, and RMON Group 1,2,3,9
• Configuration via Console Port (serial cable included), SNMP, Telnet, and Web Browser
• Extensive front panel diagnostic LEDs
• 19” Rack Mountable
• 5-Year Warranty
Performance:
Provides Gigabit Module Slot for 100Base-FX or Copper/Fiber Gigabit connection.
Flexibility:
Connects to 10Base-T, 100Base-TX, 100Base-FX, 1000Base-T, and 1000Base-SX networks (with optional module).
Expandability:
Simple expansion by uplinking to 10/100Mbps or Gigabit Switches. Trunking feature increases throughput between Switches within the
network.
Cost Effectiveness:
Provides SNMP management and Gigabit Performance at an affordable price.
Security:
Port-based VLAN to further segmenting the network.
TEG-S2400i
rev:01.09.2007
24-Port 10/100Mbps SNMP Switch with Gigabit Module Slot
TEG-S2400i
SPECIFICATIONS
Hardware
• IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX/100Base-FX Fast Ethernet, IEEE 802.3ab 1000Base-T/1000Base-SX
Standards
Data Transfer Rate
Cabling
Console Port
Protocol
Topology
Data RAM Buffers
Filtering Address Table
Diagnostic LEDs
Power Consumption
Dimensions
Weight
Temperature
Humidity
Certifications
Gigabit Ethernet, ANSI/IEEE 802.3 Auto-Negotiation, IEEE 802.3z 1000BaseSX/LX Gigabit Ethernet, IEEE 802.3x Full-Duplex
Flow Control, IEEE 802.1D Spanning Tree, IEEE 802.1P QoS, IEEE 802.1Q VLAN, IEEE 802.1v port-based VLAN
• Ethernet: 14,880 pps
• Fast Ethernet: 148,800 pps
• Gigabit Ethernet: 1,488,000 pps
• Ethernet: UTP/STP Cat. 3,4,5, EIA/ITA-568 100-ohm, 100 meters max.
• Fast Ethernet:
– UTP/STP Cat. 5, EIA/TIA-568 100-ohm, 100 meters max.
– 62.5/125um Multimode Fiber with SC-type connector, 2Km max.
• Gigabit Ethernet:
– UTP/STP Cat. 5, EIA/TIA-568 100-ohm, 100 meters max.
– 62.5/125µm Multimode Fiber with SC-type connector, 220 meters max.
– 50/125µm Multimode Fiber with SC-type connector, 550 meters max.
• RS-232, female 9-Pin Serial Port (DB-9 male-to-female serial cable included)
• CSMA/CD
• Star
• 3MB Packet Buffer and 1MB Controller Buffer
• 14K entries per device
• Per Device: Power, Diagnostic, FAN1, FAN2
• Per Port: 100M, Link/Act
• 100 ~ 240 VAC, 50 ~ 60Hz, Internal Universal Power Supply
• 440 x 184 x 44mm (17.3 x 7.3 x 1.8 inch) (W x H x D)
• 2.3 Kg. (5.1 lb.)
• Operating: 5° ~ 45° C (41° ~ 113° F) • Storage: -20° ~ 70° C (-4° ~ 158° F)
• Operating: 10% ~ 90% non-condensing
• CE, FCC
NETWORKING SOLUTIONS
TEG-S2400i
(with TEG-S24M2G)
TE100-PS3+
N n
u
l
E
3s
S
R
Pp
0
T
1
E
T0
e
w
o
P r
nL
t
e
n
D
N
A
E
US
,
R
e
r
a
T
w
D
N
E
R
T
tD
e
e
v
r
e
S
n
it
r r
P
3
T
P
L
T
P
L2
1
T
P
L
s
s
e
e
rl
i
W
y
t
i
l
a
u
Q
ct
A
/i
k
Server with
TEG-PCITX2
TEG-S80TXD
T
0
8
S
GE
D
NT
E
,
e
R
r
a
D
N
EU
R w A
T
D
XT
t
e
n
S
Servers with
TEG-PCITX2
TW100-BRF104
INTERNET
Cable/DSL
Modem
RELATED PRODUCTS
TEG-S24M2C
TEG-S24M1F
TEG-S24M2F
2-port Copper Gigabit Module
1-port Fiber Gigabit SC-type module
2-port Fiber Gigabit SC-type module
Printers
Workstations with
TE100-PCIWN
1000Mbps
100Mbps
10/21/2002
TEG-S18TX
TE100-PS1plus
Workstations with
TE100-PCIWN
s
u
l
p
s
1
u
l
S
-
1
Sp
0
0
P
-
1P
0
t
E
e
0
T
1
n
t
E
e
A
D
S
T
U
n
N
,
e
r
A
D
E
wa
S
D
U
N
N
,
R
E
e
r
R
a
T
E
T
w
D
N
R
E
R
T
T
Printer
ORDERING INFORMATION
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: 1-310-961-5500
Fax: 1-310-961-5511
www.trendnet.com
Web:
Email: sales@trendnet.com
To Order Please Call:
1-888-326-6061
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their re spective holders. Info rmation provided in thi s document pertain to TRENDnet
products and is subject to change at any time, without notice. For the most recent product information please visit
Copyright TRENDnet. All Rights Reserved.
©
http://www.trendnet.com.