TRENDnet TEGS16g, TEGS24g User Manual

Quick Installation Guide

TEG-S16g
TEG-S24g

1.01

Table of Contents

English 1

1. Before You Start

2. Hardware Installation 2

3. LEDs 3

Technical Specifications 4
Troubleshooting 5

1

Version 01.12.2011

1. Before You Start

Package Contents

TEG-S16g/TEG-S24g

Ÿ
ŸMulti-Language Quick Installation Guide
ŸPower Cord (1.8m / 6ft.)
ŸRack Mount Kit

System Requirements

Computer with Network adapter installed

Ÿ
ŸCAT-5e or CAT-6 Network Cable
ŸThe surface must support at least 2.3Kg (5 lbs.) for the Switch
ŸThe power outlet should be within 1.8 meters (6 feet) of the switch
ŸMake sure that there is proper heat dissipation and adequate ventilation around the Switch
ŸDo not place heavy objects on the Switch

1

2. Hardware Installation

1. Connect the Power Cord to the

TEG-S16g/TEG-S24g and then to a power
outlet.

2. Connect a CAT-5e or CAT-6 RJ-45 network
cable from the computer to an available
Ethernet port on the TEG-S16g/TEG-S24g.

3. Move the power switch to the on position.

2