TRENDnet TE100-P1P - Parallel Print Server, TE100-PIP Quick Installation Manual

TE100-PIP

V2

Quick Installation Guide

Table of Contents

Version 07.21.2010

English 1

1. Before You Start

2. How to Install 2

3. 3

1

Configure the Print Server

4. Add the Printer to your PC 5

Troubleshooting 7

1. Before You Start

?

?Wired or Wireless Router
?An available DHCP server – routers usually have a built-in DHCP server

CD-ROM Drive

Package Contents

?

?Utility CD-ROM
?Multi-Language Quick Installation Guide
?AC Power Adapter (5V DC, 2.5A)

TE100-P1P

System Requirements

1

Supported Operating Systems CPU Memory

Windows 7 (32/64-bit)
Windows Vista (32/64-bit)

Mac OS X (10.6)

Windows XP
(32/64-bit) / 2000 / ME / 98SE

2003 Server /

1GHz or above
800MHz or above

Intel Processor

300MHz or above

1GB RAM or above
512MB RAM or above

1GB RAM or above

256MB RAM or above

Mac OS X (10.5)
Mac OS X (10.4)
Mac OS X (10.1-10.3)

867MHz or above
333MHz or above
300MHz or above

512MB RAM or above

256MB RAM or above

256MB RAM or above

2. How to Installation

4. Power ON the printer.

2

Note: Please power off all printers before connecting them to the print server. Then turn
on each printer after you make your hardware connections.

3. Connect the Parallel Printer to the Parallel port
on the Print Server.

1. Connect a RJ-45 network cable from a Switch/
Router to the LAN port on the Print Server.

2. Connect the AC Power Adapter to the Print
Server and then to a power outlet.