TRENDnet TC-NT3 Specsheet

TC-NT3

VDV & USB Cable Tester

TC-NT3 (v1.0R)

• Comprehensive cable tester for network professionals

• Tests voice, data, video, and USB cables

• Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.)

• Identifies severed, short circuit, and cross connected pins

• Quick pass/fail for large test quantities

• Blinking Hub/Switch Mode identifies connected hub/switch port

• Convenient travel case

TRENDnet’s VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice,
data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters
(1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case.

TC-NT3

Hardware

Cables and Ports

Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4,
6, and 8) straight through and reverse, COAX and Alarm with includes
RJ45 to F adapters, USB 3.0, and USB 2.0 cables

PIN Tests

Identifies proper, severed, short circuit, and cross connected pins

TX/RX Troubleshooting

Displays separate TX and RX results for more efficient troubleshooting

Local and Remote Testing

A master unit facilitates loop testing and a detachable remote terminal
unit allows for cable testing in locations away from the master unit

Continuous Scan

Continuous scan mode is design to accommodate testing with cable
ends in different locations

Manual Scan

Manual scan is well suited for loop back cable testing

Quick Test Mode

Designed to quickly test large cable quantities, Quick Test Mode
identifies a given cable type and then immediately issues a Pass/Fail for
the same cable type

Blinking Hub/Switch Mode

Designed to confirm which port on a hub/switch a given cable is
networked to, Blinking Hub/Switch Mode causes the connected network
port’s LED indicator to blink

Cable Distance

Tests cables lengths of up to 300 meters (1,000 ft.)

Tone Generator

Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables
using two selectable tones

Networking Solution