Trendnet TC-NT1 DATA SHEET

TC-NT1

Professional Network Tester

TRENDnet's TC-NT1 is a practical and easy-to-use cable
tester that can easily read the correct pin configuration of
10Base-T cable, 10Base-2 cable, RJ-45/RJ-11 modular
cables, 356A, TIA-568A/568B, and Token Ring cable by
comparing one transmitting end to the corresponding
receiving end. The remote kit can test installed cables over
great distances, either on wall plates or patch panels. Our TC­NT1 is economically priced for correct cable testing.

TRENDnet

TRENDware, USA

What's Next in Networking

FEATURES

Test the correct pin configuration of 10Base-T
(Category 5), 10Base-2 Ethernet cable (coax), RJ­45/RJ-11 modular cables, 356A, TIA-568A/568B, and
Token Ring cable

Test the grounding

Verify cable continuity, openness, shortness, and
miswire easily

Test the cable 1,000 feet away that are on wall plate
or patch cable with remote kit

Auto or Manual scan modes for pin-out indicators

Power Switch is included for saving battery power

1 Year Warranty

PRODUCT INFORMATION

TC-NT1: Network Cable Tester for

UTP, STP, Coaxial, and Modular
Cables

TC-NT2: Network Cable Tester with
Tone Generator for UTP, STP, Coaxial,
and Modular Cables

TC-CT68: RJ-11/RJ-45 Crimp/Cut/Strip
Tool

TC-PDT: Punch Down Tool with 110
and Krone Blade

TC-1KC5G: 1,000 feet Solid CAT5e
UTP Cable

ORDERING INFORMATIONORDERING INFORMATION

TRENDware International, Inc.

3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: [phone]
Fax: [phone]

www.TRENDNET.com

Web:
Email: [e-mail]

To Order Please Call:

1-888-326-6061

TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this

document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit

Copyright TRENDware International, Inc. 2004. All Rights Reserved.

©

http://www.TRENDNET.com.

____________________

TC-NT1 (11-17-2002)