Trendnet TC-K50C6, TC-K25C6 Quick Installation Guide

Quick Installation Guide

1. White Orange

2. Orange

3. White Green

6. Blue

4. White Blue

5. Green

7. White Brown

8. Brown

Cat6 Keystone Jack TC-K25C6/TC-K50C6

1. Strip approximately 30mm (1.2 in.) of

Cable Tie

5. Feed the included cable tie through the

jacket from the twisted pair cable.

2. Insert the cable into the termination cap and fan out all four twisted pairs. Using the T568A or T568B color labeling, position each wire appropriately into the color labeled slots. Cut excess wires.

3. Clip the termination cap onto the

cable fixture hole and tighten to secure the termination cap and keystone jack together.

Unloading the cable

1. Cut the cable tie.

2. Using a flathead screwdriver, gently pry each side of the termination cap until released.

Cable Fixture Hole

Cable Tie

Cut oﬀ cable tie

keystone jack hinge.

4. Press the termination cap down until flush with the keystone jack. Ensure each wire is firmly anchored in each slot.

T568B Pinout