TrendGeek TG-122 User Manual
TrendGeek® * User Manual
LED Decoration Projector TG-122
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the
device the first time, please read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.
Warranty 2 years
If you drill a hole in the wall, please make sure that power cables, electrical
cords and/or pipelines are not damaged. When using the supplied mounting
material, we do not take the liability for a professional installation. You are
entirely responsible to ensure that the mounting material is suitable for the
particular masonry, and that the installation is done properly. When working at
higher altitudes, there is danger of falling! Therefore, use suitable safeguards.
Features
For decorative lighting of exterior and interior house walls
Multicolour light projection in red-green-blue Swiveling luminaire
head Protection Class IP44 (splash water proof) Ground spike
Technical specifications
Power input AC 100~240V, 50/60Hz
LED
Cable Length ~1m
Protection class & Material housing IP44 & ABS
Weight/Dimensions without ground spike: 290g / Ø 7 x (L) 16cm
Weight/Dimensions
3x power 1W/piece (red, green, blue)
with ground spike: 312g / Ø 7 x (L) 16 x
(H) 28cm
Produkt view
(1) LED Decoration Projector TG-122
Package Contents
Outdoor use How to attach the ground spike
Indoor use
(2) Ground spike (3) Allen wrench
(4) User Manual
Put the device on the table or on any another
suitable mounting surface. When installing,
please make sure that the unit cannot swing
freely.
Operation
This product serves as a light decoration and is intended for use in
outdoor and indoor area (protection class IP44: protection against
ingress of dust & against splashing waters). This product is not
suitable for commercial use.
For outdoor use follow these steps
Use the hex screw, locking washer, and washer to attach the
ground spike to the pivot mount (see above).
Place the Projector with the ground spike at the desired location
into the ground.
Position the projection by changing the angle of projector.
Extension cables that may be used must be suitable for the outdoor
area. Make sure that the plug connection is never placed in or under
water, eg in puddles or in places where rain water could accumulate.
Loading...