Page 1
Installation Instructions
ACC/STAR3DIN/PANELKIT
EM-MPO/STAR3DIN Meter Panel Mounting Kit
Important: Retain these instructions
UNPACKING
INSTALLATION
Dimensions (mm)
1
46
Cut hole in panel
3
46
185
159
180
Frame
threaded rods
lock nuts
72
6
ACC/STAR3DIN/PANELKIT
Installation Instructions
clamping
blocks
DIN rail
Panel thickness
2
83
8 mm
maximum
TG200338
Screw Rods into Frame
4
ACC/STAR3DIN/PANELKIT Installation Instructions TG200338 Issue 2/B 17/09/07
1
Page 2
ACC/STAR3DIN/PANELKIT Installation Instructions
INSTALLATION (continued)
Fix Frame to Panel
5
(a) Push rods through hole
Connect Meter
6
EM-MPO/STAR3DIN
Installation Instructions
TG200770 steps 1 to 7
(b) Push clamping blocks onto rods
(c)
Ensure Meter is switched off
7
O
I
Fix Meter to DIN Rail
8
2
ACC/STAR3DIN/PANELKIT Installation Instructions TG200338 Issue 2/B 17/09/07
Page 3
Installation Instructions ACC/STAR3DIN/PANELKIT
INSTALLATION (continued)
Push Rail onto Rods
9
Configure Meter and Check System
11
EM-MPO/STAR3DIN Installation Instructions
TG200770 steps 9 to 12
10
tighten nuts
Fix Meter to Frame
ACC/STAR3DIN/PANELKIT Installation Instructions TG200338 Issue 2/B 17/09/07
3
Page 4
ACC/STAR3DIN/PANELKIT Installation Instructions
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route
du Bois 37,Switzerland by its Authorized Representative.
Trend Control Systems Limited reserves the right to revise this publication from time to time and make changes to the content hereof
without obligation to notify any person of such revisions or changes.
Trend Control Systems Limited
P.O. Box 34, Horsham, West Sussex, RH12 2YF, UK. Tel:+44 (0)1403 21888 Fax:+44 (0)1403 241608 www.trend-controls.com
Trend Control Systems USA
6670 185th Avenue NE, Redmond, Washington 98052, USA. Tel: (425)897-3900, Fax: (425)869-8445 www.trend-controls.com
4
ACC/STAR3DIN/PANELKIT Installation Instructions TG200338 Issue 2/B 17/09/07
Loading...