Trek 2210 User Manual
Trek Model 2210
Piezo Driver/Power Amplifier
Trek’s Model 2210 is one of several models within our 2200series of high-voltage 40 W amplifiers. Provided at an
attractive price and offering high performance, the unit
incorporates DC stability, wide bandwidth and well
regulated/controlled AC output signals. It also features full
four-quadrant class AB all-solid-state output stages, DC
offset adjustment with front panel metering, and autorecovery shutdown to protect the output from being
overpowered. The instrument stage sinks or sources current
into reactive or resistive loads throughout the output voltage
range making it ideal to achieve the accurate output
response and high slew rates demanded by reactive loads.
Key Specifications
!
Output Voltage Range:
!
Output Current Range: peak AC for 5 ms minimum
Slew Rate: 150 V/
!
Large Signal Bandwidth (-3 dB): DC to greater than 40 kHz
!
Small Signal Bandwidth(-3 dB): DC to greater than 100 kHz
!
DC Voltage Gain: 100 V/V
!
0 to ±1 kV DC or peak AC
0 to ±20 mA DC or ±40 mA
µs, typical
Typical Applications Include
Model 2210
! Piezoelectric driving/control
Electro-optic
!
MEMS
!
Many areas of research
!
kV p-p
Features and Benefits
Frequency (Hz)
!
Four-quadrant output for driving capacitive loads
!
2-year warranty
DC offset adjustment with front panel metering
!
Auto-recovery shutdown protects the output from being overpowered
!
Low output noise for ultra-accurate outputs
!
All solid-state output stages
!
! RoHS compliant
! HALT Tested
! NIST-traceable Certificate of Calibration provided with each unit
! compliant
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
(fax) • www.trekinc.com • sales@trekinc.com 716-438-7555 • 716-201-1804
Features
Response
A graduated 1-turn panel potentiometer is used
to optimize the AC response for various load
parameters.
High Voltage LED
Front panel red LED illuminates when the high
voltage is on.
Mechanical
Dimensions
85 mm H x 205 mm W 325 mm D
(3.3” H x 8.1” W x 12.8” D)
Weight
2 kg (4.4 lb)
HV Connector
SHV Connector
BNC Connectors
Amplifier Input, Voltage Monitor, Current Monitor,
Digital Enable
Operating Conditions
Temperature
0°C to 40°C (32°F to 104°F)
Relative Humidity
To 85%, noncondensing
Altitude
To 2000 meters (6561.68 ft.)
Electrical
Input Power
90 to 265 V AC, at 50/60 Hz
Output Power
24 V DC, regulated at 1.75A maximum
HV Cable
2 m, 30.8 pF per foot
Supplied Accessories
Operator’s Manual
PN: 23446
AC Adapter
PN: L5215R
HV Output Connector
(SHV Mating
Connector)
PN: 43874R
Optional
Accessories
None
Note
The output cable supplied with this instrument uses a coaxial cable
that has 30.8 pF/ft of capacitance at 1 kHz nominal. This cable
capacitance must be factored in as a portion of the load and will reduce
slew rates and large signal bandwidth. In applications that require
maximum performance it is suggested that the supplied high voltage
coaxial cable be kept as short as possible to reduce capacitance.
Another option is to cut the coaxial cable short and add two break out
leads (one for shield [ground] and one for the center conductor) for the
connection to load.
Model 2210 Specifications
Performance
Output Voltage
Range
0 to ±1 kV DC or peak AC
Output Current
Range
0 to ±20 mA DC or ±40 mA peak for 5 ms
minimum
Input Voltage Range
0 to ±10 V DC or peak AC
Input Impedance
10 kW, nominal
DC Voltage Gain
100 V/V
DC Voltage Gain
Accuracy
Better than 0.5% of full scale
DC Offset Voltage
Less than 1 V
Output Noise
Less than 30 mV rms*
Slew Rate
(10% to 90%, typical)
Greater than 150 V/µs
Large Signal
Bandwidth (-3 dB)
DC to greater than 40 kHz
Small Signal
Bandwidth (-3dB)
DC to greater than 100 kHz
Settling Time to 1%
Less than 30 µs for 0 to 1 kV step
Internal Capacitance
(HV Output)
300 pF
Automatic Power
Limit
Limits internal power dissipation for protection
from overheating
Stability
Drift with Time
Less than 300 ppm/hr, noncumulative
Drift with Temp
Less than 180 ppm/°C
Voltage Monitor
Ratio
1/100th of the high voltage output
Noise
5 mV rms
DC Accuracy
Better than 0.5% of full scale
Current Monitor
Ratio
0.2 V/mA
DC Accuracy
Better than 2% of full scale
*Measured using the true rms feature of the Hewlett Packard Model 34401A digital multimeter
Measurement and Power Solutions
Copyright © 2012 TREK, INC. All specifications are subject to change. 1303/JRB
TM
Loading...