Trek Model 1501
Model 1501 Specifications
Rechargable Lithium Battery
3.6 V 900 mAh
-5°C to 40°C
Up to 75% relative humidity noncondensing
Test voltage (open
circuit)
2 banana sockets - short version
(15mm)
145 mm H x 80 mm W x 35 mm D
(5.7” H x 3.1” W x 1.4” D)
Operators Manual w/
Software
Surface Resistance Meter
The Model 1501 surface resistance meter is a hand-held, lightweight, auto
ranging surface resistance tester. Built-in electrodes with conductive
rubber make good contact with the object under test. Measured values are
displayed on an LCD dot matrix module and can be stored in the internal
memory. Each measurement includes the current temperature and relative
humidity. Model 1501 software (included) provides easy access, display
and export of data collected. Data can be exported to a .CSV file or
displayed as an HTML report in an easy to read chart for data comparison.
Appropriate electrodes can be externally connected for tests according to
IEC 61340-4-1, IEC 61340-2-3 and IEC 61340-4-5, ANSI/ESD S4.1-2006,
ANSI/ESD STM11.11-2006, ANSI/ESD STM11.12-2007, ANSI/ESD
STM11.13-2004, ANSI/ESD 12.1-2006, ANSI/ESD STM 97.1-2006.
Typical Applications Include
! Measuring surface resistance on a variety of conductive , dissipative, and insulative materials
- Footwear
- Worksurfaces
- Flooring and flooring materials
- Packaging
! Two point resistance measurements
Copyright ã 2013 TREK, INC. All specifications are subject to change. 1326/JRB
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
716-438-7555 • 716-201-1804 (fax) • www.trekinc.com • sales@trekinc.com