Page 1
J1
USER’S MANUAL
WIRELESS
BLUETOOTH
EARPHONES
J1
5
USER’S MANUAL
WIRELESS
BLUETOOTH
EARPHONES
1. TREBLAB J1
2. Carrying case
3. Silicone eartips
4. Expandible foam eartips
5. User’s manual
J1
6. Charging cable
2
3
4
1
6
Thank you for buying TREBLAB earphones
with Bluetooth 4.1 EDR with APTX technology.
Our main goal is to please you with superior sound
quality and comfort combined with convenience of
hands-free operation. Before usin g this product,
please read this manual.
Volume
LED
Funct ion
Power On
Power Off
In Pairing Mode
Answering Call
End Call
Reject
Redial
Cancel / End
Pause / Pl ay
Volume+ / VolumePrevious song / Next song
Play/pause/on/off
-
-
USB Port
Volume
+
+
Mic
Operation
Long press for 2 seconds
Long press for 2 seconds
Long press for 4 seconds
Short press one time
Short press one t ime
Long press for 2 seconds
Double press one time
Short press one time
Short press one time
Short press
Long press
Speaker
-
+
-
+
SPECIFICATIONS
Voice Prompts
Battery Capacity Displayed on Device, CVC6.0 echo
noise cancellation with APTX technology.
IPX-6 Sweat-proof
Bluetooth Version 4.1 + EDR
Bluetooth Profiles Headset, Hands free,
A2 DP, AV RCP
Operating Distance 30 feet / 10 meters
Talk time Up to 9 ho urs
Standby Time 240 hours
Charging Time About 2 hours
Charging Port Micro USB
LI-batter y Capacity 100 mAh, rechargeable
HOW TO CHARGE
The battery has approximately 9 hours of battery life.
When the sound be comes intermitte nt, you hear Low
Batter y, or if the LED indicator flashes two times ever y
20 seconds, it means the bat tery is running low. Once
this hap pens, yo u have about 5-10 minutes of use
before the earphones power off automatic ally.
Charge the batteries by:
Using the provide d USB/micro USB cable, connect
the micro USB end of th e charging cable to the
micro USB charging port and the standard USB end
to a PC USB port or USB charger.
The LED indicator will be red while charging. It will
turn blue after 1-2 hours. The battery is now fully
charged.
VOLUME BUTTON
Volume / (Pres s the button one time, the volu me will
change one level.
-
+
LED
While charging Red light is on
When fully charged Blue light is on
Low batter y Red light flashing twice
and voice prompt
Pairing mode Blue and red light fl ashing
WEARING THE TREBLAB EARPHONES
Using the correct size earbuds is critical for external
noise cancell ation and securely staying in your ear.
Use the appropriate size expandable foam ear-tips
to help the earbuds stay in place. J1 earbuds have a
wire that could be easily fixed around the back of
your head (neck) u sing a supplied cord minder to
ensure additional securing of the earbuds and
preventing their loss. It is also common to have
different sized ear canals so try the ear tips one at a
time to find the best fit for each side. Everyone has
individual anatomic features, and to find the most
comfortable fit, you might additionally buy special-
ized tips.
To seat the ear tip firmly try gently pulling on the
outer rim of your ear to ea se the tip into a comfor table position. You sho uld notice a drop in ambient
noise when the tip is seated correctly. And when
you're listening to music, you'll notice more range,
especially bass.
HOW TO CONNECT HEADPHONES
TO YOUR DEVICE
To pair to your Bluetooth enabled device:
1 Activate the Bluetooth feature on your device and
keep with in 3 feet / 1 meter while pairing.
2 Press and hold HOME key for approximately 4
seconds until red and blue LEDs flash rapidly.
3 Using your Bluetoot h enable d device, scan/search
for available Bluetooth devices (check your device’s
manual if you’re unsure how to do this).
4 Select TREBL AB J1 from the device l ist.
5 If p rompted , enter password or PIN No: 0000
6 If prompted by your device to connect, select Yes.
7 After pairing successfully, the LED indicator will
flash blue t wice. You can then answer the phone or
listen to music.
8 The next t ime you switch on th e earphones, t hey will
automatically search for and attempt to connect to
the las t paired device.
HOW TO CONNECT HEADPHONES TO
MULTIPLE DEVICES
The TREBLAB J1 can only be paired to one device. If
you want to use the TREB LAB J1 to l isten to another
device:
1 Activate the Bluetooth feature on your device and
keep with in 3 feet / 1 meter while paring.
2 Press and hold HOME key for approximately 6
seconds until red and blue LEDs flash rapidly.
3 Using your Bluetoot h enable d device, scan/search
for available Bluetooth devices (check your device’s
manual if you’re unsure how to do this).
4 Select TREBL AB J1 from the device l ist.
5 If p rompted , enter password or PIN No: 0000
6 If prompted by your device to connect, select Yes.
7 After pairing successfully, the LED indicator will
flash blue t wice. You can then answer the phone or
listen to music.
8 To connect another device, temporarily switch off
Bluetooth on the first device you connected to.
9 Repeat steps 1-7 and connect the other device.
10 Turn Bluetooth back on for the first device.
For optimal sound quality, the distance
between your device and the earphones must
be less than 30 feet / 10 meters, In an open
space with no solid obstacles in the way.
HOW TO RECONNECT THE EARPHONES
After the connection is lost , the J1 will tr y to
reconnect automatically to any previously paired
devices.
If reconnection does not happen automatically,
press the HOME button once or reconnect
through the Blueto oth menu on your device.
RESTORE FACTORY SETTINGS
Press and hold Volume at the same time for 5
seconds while earphones in Power On mo de,
earpho nes will altern ately flash blue and red , also you
will hear a confirmation sou nd.
-
+
TROUBLESHOOTING
Device can't find the Bluetooth earphones
1 Ensure the J1 is in pairing mode, and LEDs flash blue
and red. Refer to previous section on how to e nter
pairing mode.
2 If J1 is in pairing mode and fla shes blue and red, but
is still not found by your device, please restart your
device and the head set.
3 If no connection is made within two minutes after
the headset has been in the p airing mode, it will exit
pairing mode automatically.
4 Restore J1 to factory setting s by following instruc-
tions in the previous section of the manual. If the
earpho nes will not switch off, they can be reset back
to normal by charging them.
Frequent disconnection and noise
1 Ensure your earphones are fully charged.
2 Ensure the distance between your device and the
headset is less than 30 feet / 10 meters.
3 Ensure nothing is blocking the signal betwee n your
device and your Bluetooth earphones .
4 Restore J1 to factory setting s by following instruc-
tions in the previous section of the ma nual. If you do
not use the earphones for longer than 3 minutes
while not connected to a device, they will automati-
cally power off to conserve power.
Device is connected to e arphones,
but music is not heard
1 Please go through troubleshooting steps 1 an d 2.
2 Keep in mind some devices do not have a stereo
Bluetooth module and Blueto oth function to listen
to music. Please connect yo ur Blueto oth earphones
to another device.
3 Restore J1 to factory settings by following instruc-
tions in the previous section of the manual.
The red LED does not come on while charging
1 This can happe n when you have not used the
earpho nes for a long time. Please allow at least 30
minutes to charge and the problem should be
solved .
2 Restore J1 to factor y settings by following instruc-
tions in the previous section of the manual.
Can't connect the earphones to your device
1 Reset the J1 to factory settings by following instruc-
tions for a hard reset .
2 Go to your device's Bluetooth menu and delete all
saved devices from the list by cli cking “Forget this
dev ice ”.
3 Turn your device's Bluetooth off then turn it back on;
TREBL AB J1 will be deleted.
4 Power off device then turn back on.
5 Unplug TREBL AB J1 from charging cable then
power on.
6 Enter the earphone into the pairing mode and follow
instructions for connecting.
My device is asking for a pa ssword
If prompted, plea se enter 0000 as the password on
your device.
SAFETY RULES
Never disassemble or modify your headset for any
reason . Doing this may cause the headset to
malfunction or become combustible. The damage to
your device can void your manufacturer’s warranty.
Do not allow your device to get wet - liquids can
cause serious damage. Water damage to your
device can void your manufacturer’s warranty.
Avoid exposing your device to very cold or very hot
temperatures (below 37F/3C
Extre me tempe rature can cause the deformation of
the device and reduce the charging and life of your
device.
Avoid using your device’s light close to the eyes of
children or animals.
Do not use the device during a thunderstorm.
Thunderstorms can cause the device to malfunction
and increase the risk of electric shock.
NOTE: Do not charge your headset for much longer
than 2-3 hours at a time, because this can lead to
reduction in battery capacity an d void your manufacturer's warranty.
Use only the provided USB/micro USB cable.
Excessive sweating may damage the product. Make
sure to wipe the headphones dry before charging.
o
or above 112F/45Co).
BATTERY INFORMATION
Your device is powered by a rechargeable battery.
Unplug the charger from the electrical plug and the
device when not in use.
If left unused, a fully charged battery will lose its
charge over time. We recom mend a full charge
twice a month to ensure batter y integrity.
Please do not leave the device in hot or cold places,
such as in a closed car in summer or winter
conditions because this will reduce the capacity
and lifetime of the battery.
Do not di spose of the batteries in a fire as they may
explode. Batteries may also explode if damaged.
We really appre ciate that you chose TREBLAB as your
trusted brand of Bluetooth e arphones and sincerely
hope you enjoy the great sound and comfort TREBLAB
provides. We love making our customers hap py by
providing true value with our product s.
If for any reason you are not completely satisfied with
your purchase, let us know imme diately and we will do
everything to make sure you are happy.
WARRANTY
1 Year Parts and Labor Warranty.
Please visit ww w.treblab.com
to register YOUR warranty.
Manufactured by:
Productech Corp www.treblab.com
Contact us: [email protected]
+1 (315) 883-2603
WIRELESS BLUETOOTH
J1
EARPHONES
RoHS
Made in China
Loading...