Treasure Cove Vibra-iking 750 Quick Start Manual
TREASURE
P R O D U C T S
TM
detectors with a pulse
Vibra iking
Pinpointer Metal Detector
TM
BATTERY INSTALLATION
When the knob of the battery compartment seal is rotated
clockwise, the plug expands and presses against the inside
wall of the battery compartment, sealing the unit.
To open the battery compartment seal, rotate the knob
counter-clockwise a few turns, then pull to remove.
Connect a standard 9v battery to the battery clip and insert
the battery into the detector, clip side first.
IMPORTANT NOTES
Raising the detectors coil up while in use will start the
turn-off sequence, indicated by a blinking light. Lower
the detectors coil within 5 seconds to continue detecting.
Unit will not detect when the light is blinking in either the
turn-on or turn-off sequence.
As with any new detector you should practice with known
targets to develop your technique.
750
Thank you for choosing the Vibra- metal detector
made by . The unique sealed designTianXun
detecting in any environment including grass, mud,
sand, black sand, or even in fresh or salt water.
PRODUCT FEATURES
·Communicates with vibration & light - When a target
is located the Vibra- signals with pulses of
vibration and flashes of bright light from a white L.E.D.
·Pulse Induction Technology (PI) - Allows hunting in
salt water or in any type of soil, including black sand.
™
iking 750
™
iking 750
allows
di rt,
To replace the seal, insert all the way in. Then turn the
knob clockwise until hand tight to assure a water-tight seal.
Before submerging the Vibra- make
sure the battery compartment seal is secure.
OPERATING INSTRUCTIONS
Turn on sequence: Hold unit with the search coil up for
at least 5 seconds. Light will blink. Two short pulses of
vibration and a steady dim light indicate unit is on.
Turn off sequence: After use, hold unit with the search
coil up for at least 5 seconds. Light will blink. Two long
pulses of vibration and no light indicate the unit is off.
Low battery turn off: When the battery is low the unit will
shut down automatically indicated by four long pulses.
Operation: The Vibra- communicates through pulses
of vibration and bright light. These pulses increase in
quantity the closer the search coil is to a target.
The quantity of pulses is proportional to the target size
and distance. The bigger the target, or the closer the search
coil is to the target, the higher the pulse count.
The detection field projected resembles a cone shape, with
the deepest depth of detection in the center of the coil.
Move the search coil in a sweeping motion along the
surface of the area you are searching. The slower the
sweep the deeper the detection depth.
™
iking
™
iking
HELPFUL HINTS
If you continue to hold the detector with the coil up after
turn on, then the detector will remain on indefinitely. This
feature may be useful if searching with the detectors coil
in a vertical position is necessary.
You can secure the Vibra- to your wrist using the
attached wrist strap. To adjust fit, press down on the cord
lock button and move it to the desired location.
CARE AND MAINTANANCE
Your Vibra- is a sensitive electronic instrument.
Although it is rugged, care in transporting and handling
will extend its life and result in optimum performance.
When the Vibra- is off there is no drain on the battery.
However, if stored for long periods of time, we recommend
that the battery be removed to prevent damage to the
detector due to a potential battery leak.
If the detector has been exposed to salt water always rinse
with fresh water and check the battery compartment for
any leaks. If water has entered the battery compartment
carefully wipe dry and leave open until completely dry.
™
iking
™
iking
Always use high quality batteries such as
alkaline or nickel metal hydride (NiMH).
™
iking
·Detection depth stability - Advanced circuitry maintains
detection distance throughout the life of the battery.
·Target distancing - As you get closer to the target the
pulses of vibration and light will increase in quantity .
·Automatic tuning - The state of the art microprocessor
controlled design requires no adjustments of any kind.
·Waterproof - Sealed design allows hunting in the rain
or under water to a depth of 100 feet. Great for divers!
Vibra-iking
Arms and shoulders tired from
swinging that heavy detector?
,
That s why we created it.
Fully adjustable
·
TM
730
Other fine products from Kingdetector
TM
Vibra-iking
Hearing impaired?
,
Don t like headphones?
Replace sound with vibration
740
.
Vibra- Specificationsiking 750
Detecti
Search Mode
Alarm M
Overall Length
Tip Diameter
Wris t str ap
Specifications are subject to change without notice.
™
on Type
ode
Weig ht
Pow e r
Warranty
Ho lst er
·Pulse Induction
·All metal
·vibration and LED white
·17 inches (43cm)
·4 inch (10cm)
·1 Ib.(450 grams)
·Standard 9 volt battery
·1 year
·Included
·Included
light
PRODUCTS LIMITED WARRANTY
What does this warranty cover?
Our products warrant that its products are free from defects
in material and workmanship under normal use for a period of
one (1) year from the date of purchase.
Warranty extends only to original purchaser and is not transferable.
What is not covered by this warranty?
Th is warr ant y do es not cove r any acce sso rie s, or an y
consumables, as to which there shall be no warranty or replacement. This warranty does not cover conditions or damages caused
by accidents, alterations or misuse. In addition, damage due to
normal wear and tear is not covered by this warranty.
What is needed to keep the warranty in service?
You must provide proof of purchase as a condition of receiving
warranty service. Your dated sales receipt, showing the date of
purchase of your product is your proof of the purchase date.
What will Products do to correct problems?
Kingdetector will repair or replace
malfunctioning
product or any component thereof.
any defective, nonconforming, or
Made in China
Loading...