Traxxas LP TRX1024 User Manual

Visite la página TRAXXAS.com/manuals para

descargar el Manual del usuario en su idioma.

Auf TRAXXAS.com/manuals können Sie eine

Bedienungsanleitung in Ihrer Sprache downloaden.

owner’s manual

manuel du propriétaire

MODELS / MODÈLES 6507R, 6509R

2 • TQi RADIO SYSTEM

Important Radio System Precautions

• For maximum range, always point the front of the transmitter
toward the model.

• Do not kink the receiver’s antenna wire. Kinks in the antenna wire
will reduce range.

• DO NOT CUT any part of the receiver’s antenna wire. Cutting the
antenna will reduce range.

• Extend the antenna wire in the model as far as possible for
maximum range. It is not necessary to extend the antenna wire
out of the body, but wrapping or coiling the antenna wire should
be avoided.

• Do not allow the antenna wire to extend outside the body
without the protection of an antenna tube, or the antenna wire
may get cut or damaged, reducing range. It is recommended to
keep the wire inside the body (in the antenna tube) to prevent
the chance of damage.

•

To prevent loss of radio range
do not kink or cut the black
wire, do not bend or cut the
metal tip, and do not cut the
white wire at the end of the
metal tip.

Warranty Information

Traxxas warrants your Traxxas electronic components to be free from
defects in materials or workmanship for a period of thirty (30) days from the
date of purchase. Before returning any product for warranty service, please
contact our service department at 1-888-TRAXXAS (U.S. residents only) to
discuss the problem you are having with the product. After contacting
Traxxas, send the defective unit along with your proof of purchase
indicating the date purchased, your return address, e-mail, a daytime
phone number, and a brief description of the problem to:

Traxxas, 6250 Traxxas Way, McKinney, Texas 75070
Phone: [phone] Internet: Traxxas.com E-mail: [e-mail]

Detailed Limitations for Electronic Components:

• Allowing water, moisture, or other foreign material to enter the component or
get onto the PC board.

• Exceeding the maximum input voltage of the electronic
component.

• Reverse voltage application.

• Incorrect installation or wiring.

• Components worn from use.

• Splices to the input or switch harnesses.

• Disassembling the case.

• Excessive force when adjusting, pressing, or turning any of the
controls.

• Tampering with the internal electronics.

• Incorrect wiring of an FET servo.

• Allowing exposed wiring to short circuit.

• Any damage caused by crash, flooding, or act of God.

Limitations

Any and all warranty coverage does not cover replacement of parts and
components damaged by abuse, neglect, improper or unreasonable use,
crash damage, water or excessive moisture, chemical damage, improper or
infrequent maintenance, accident, unauthorized alteration or modification,
or items that are considered consumable. Traxxas will not pay for the cost of
shipping or transportation of a defective component from you to us.

Limitations of Liability

Traxxas makes no other warranties expressed or implied. Traxxas shall not
be liable for any special, indirect, incidental, or consequential damages
arising out of the assembly, installation, or use of their products or
any accessory or chemical required to use their products. By the act of
operating/using the product, the user accepts all resulting liability. In no
case shall Traxxas’ liability exceed the actual purchase price paid for the
product. Traxxas reserves the right to modify warranty provisions without
notice. All warranty claims will be handled directly by Traxxas. The Traxxas
warranty gives the customer specific legal rights and possibly other rights
that vary from state to state. All dollar amounts stated are in United States

WARRANTY AND PRECAUTIONS

Entire contents ©2018 Traxxas.
Other brand names and marks are the
property of their respective holders
and are used only for purposes of
identification. No part of this manual
may be reproduced or distributed in
print or electronic media without the
express written permission of Traxxas.
Specifications are subject to change
without notice.

1/16

Models

All Other

Traxxas Models

No No

4

TRANSMITTER
AND RECEIVER

5 GETTING STARTED

Basic Adjustments ........................5

Battery Installation .......................6

Model Profiles ................................6

7 USING THE

RADIO SYSTEM

Range Testing ................................7

Binding Instructions .....................8

Traxxas Stability Management ..8

9 ADVANCED

TUNING GUIDE

Available Tuning Adjustments ...9
Traxxas Link Wireless Module ..12

Transmitter LED Codes ...............14

Traxxas Link Model Memory .....15

16 MENU TREE5

TQi RADIO SYSTEM • 3

dollars. The term “lifetime” shall refer to the product’s production life
at Traxxas. Traxxas is not obligated to provide upgraded products at a
reduced rate when a previous product’s production cycle has ended.

Traxxas encourages you to register your model online at Traxxas.com/
register.

Traxxas Lifetime Electronics Warranty

After the expiration date of the free warranty period, Traxxas will repair
electronic components for a flat rate. The electronic products covered by
this extended service plan include electronic speed controls, transmitters,
receivers, servos, and battery chargers. Motors, batteries, and mechanical
speed controls are not covered. The covered repairs are limited to non­mechanical components that have NOT been subjected to abuse, misuse,
or neglect. Products damaged by intentional abuse, misuse, modification,
or neglect, may be subject to additional charges. Visit Traxxas.com or
call 1-888-TRAXXAS (1-888-872-9927) for details on extended warranty
service and rates.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.

Canada, Innovation, Science and Economic Development (ISED)
CAN ICES-3 (B)

This device contains license-exempt transmitters that comply with
Innovation, Science and Economic Development Canada’s license­exempt RSS(s).

Operation is subject to the following two conditions: 1.This device may
not cause interference. 2. This device must accept any interference,
including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Statement

This equipment complies with FCC/IC RSS-102 radiation exposure limits
set forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.

WARRANTY AND PRECAUTIONS