Traxxas LP TRX1022 Users Manual

s manual

’

owner

NiMH / LiPo Fast Charger

Never charge LiPo battery packs in series or parallel.

•

charging. Look for any loose leads or connectors,

damaged wire insulation, damaged cell packaging,

impact damage, fluid leaks, swelling (a sign of

internal damage), cell deformity, missing labels, or

Charging packs in series or parallel may result in

improper charger cell recognition and an improper

charging rate that may lead to overcharging, cell

imbalance, cell damage, and fire.

• ALWAYS inspect your LiPo batteries carefully before

DO NOT charge with

any other damage or irregularity.

WARNING! CAUTION! DANGER!

FIRE HAZARD!

CHARGING AND DISCHARGING BATTERIES HAS

THE POTENTIAL FOR FIRE, EXPLOSION, SERIOUS INJURY, AND PROPERTY

with a balance adapter port to charge LiPo batteries.

DAMAGE IF NOT PERFORMED PER THE INSTRUCTIONS. BEFORE USE, READ AND FOLLOW

ALL MANUFACTURER’S INSTRUCTIONS, WARNINGS, AND PRECAUTIONS. NEVER ALLOW

CHILDREN UNDER THE AGE OF 14 TO CHARGE OR USE LIPO BATTERIES WITHOUT THE

SUPERVISION OF A RESPONSIBLE, KNOWLEDGEABLE ADULT.

Thank you for purchasing the Traxxas EZ-Peak Live Dual™ charger. This charger features exclusive Traxxas

innovations that make charging batteries easier and safer than ever. If you have any questions or concerns

about your charger, please contact our customer support team for fast, friendly answers and solutions.

Important warnings for users of Lithium Polymer

(LiPo) batteries:

Lithium Polymer (LiPo) batteries are significantly

more volatile than other rechargeable batteries.

• ONLY use a Lithium Polymer (LiPo) balance charger

Never use NiMH or NiCad-type chargers or charge

The use of a NiMH or NiCad

EZ-PEAK LIVE DUAL

charger or charge mode will damage the batteries

a NiMH-only charger.

modes to charge LiPo batteries.

and may cause fire and personal injury.

•

2

3

•

EZ-PEAK LIVE DUAL

Charging and handling precautions for all battery

types:

common sense at all times.

• ALWAYS proceed with caution and use good

• Charge only NiMH packs or 2s–4s LiPo battery packs.

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety. Children require

adult supervision while using this charger.

• This appliance is not intended for use by persons

touch each other. This will cause the battery to

short circuit and create the risk of fire.

• DO NOT let any exposed battery contacts or wires

fire retardant/fire proof container and on a non-

flammable surface such as concrete.

• While charging, ALWAYS place the battery in a

automobile.

• DO NOT operate the charger inside of an

FIRE HAZARD!

WARNING! CAUTION! DANGER! (continued)

If any of these conditions (see page 2) are observed,

do not charge or use the battery pack. Follow the

disposal instructions included with your battery to

properly and safely dispose of the battery.

around other batteries or battery packs of any type,

including other LiPos.

• Do not store or charge LiPo batteries with or

dry place. Do not store in direct sunlight. Do not

allow the storage temperature to exceed 140°F or

60°C such as in the trunk of a car or the cells may be

damaged and create a fire risk.

• Store and transport your LiPo batteries in a cool

• Do NOT disassemble LiPo batteries or cells.

pack from loose cells.

• Do NOT attempt to build your own LiPo battery

process, disconnect the battery from the charger and

place objects on top of the charger or batteries.

• DO NOT operate the charger in a cluttered space, or

do NOT charge, discharge, or use the battery.

• If any battery or battery cell is damaged in any way,

• Keep a Class D fire extinguisher nearby in case of fire.

charger settings exactly match the type (chemistry),

specification, and configuration of the battery to be

charged.

• BEFORE you charge, ALWAYS confirm that the

recommended charge rate.

• DO NOT exceed the battery manufacturer’s maximum

the batteries or cells to flame or any other source of

ignition.

• DO NOT disassemble, crush, short circuit, or expose

• If a battery gets hot to the touch during the charging

discontinue charging immediately.

• ALWAYS unplug the charger and disconnect the

batteries when not in use.

FIRE HAZARD!

WARNING! CAUTION! DANGER! (continued)

EZ-PEAK LIVE DUAL

any other flammable material.

• NEVER charge batteries on wood, cloth, carpet or on

• ALWAYS charge batteries in a well-ventilated area.

materials from the charging area.

• REMOVE flammable items and combustible

unattended while charging, discharging, or

any time that the charger is ON with batteries

connected. If there are any signs of a malfunction or

in the event of an emergency, unplug the charger

from the power source and disconnect the batteries

from the charger.

• DO NOT leave the charger and batteries

substitute for being present to watch over and tend

to batteries being charged. Batteries being charged

should always be visible and monitored in person in

case there is an unexpected problem that requires

immediate attention.

• Remote monitoring via the EZ-Peak Live App is not a

•

4

5

•

EZ-PEAK LIVE DUAL

preventing you from properly identifying the

Examples of damage or defects include,

but are not limited to, batteries with dented cells,

damaged or frayed wires, loose connections,

fluid leaks, corrosion, plugged vents, swelling,

cell deformity, impact damage, melted

- Batteries that are damaged or defective in any way.

components, or any other signs of damage.

manufacturer configuration.

- Battery packs that have been altered from original

- Non-rechargeable batteries (explosion hazard).

- Batteries that have missing or unreadable labels,

battery type and specifications.

FIRE HAZARD!

WARNING! CAUTION! DANGER! (continued)

manufacturer to be suitable to accept the power

output (voltage and amperage) the charger

- Batteries that are hot to the touch.

charger was designed to charge.

• Never attempt to charge more batteries than the

• DO NOT disassemble the charger.

before charging.

• REMOVE the batteries from your model or device

• DO NOT expose the charger to water or moisture.

of children and pets.

• ALWAYS store battery packs safely out of the reach

replaced by Traxxas in order to avoid a hazard.

• If the charger power cord is damaged, it must be

following conditions:

• DO NOT charge batteries under ANY of the

- Batteries that are not expressly stated by the

delivers during the charging process.

Balance Wires

Traxxas High-Current

integrated balance wires

Connector (4S) with iD and

Connector with iD

Traxxas High-Current

Balance Connector Integrated

Updating Firmware

Your EZ-Peak Live Dual charger has the ability to receive firmware updates that can add new features and

capabilities. Firmware updates are performed via the EZ-Peak Live App (see Traxxas EZ-Peak Live Application

on page 16). Visit Traxxas.com for the latest firmware updates and instructions for how to install them on

your charger.

Know your connectors

(without iD)

LiPo Balance Connector

WARNING: FIRE HAZARD!

If you have a battery that is labeled as or appears to be a LiPo but it does not have a balance

connector, do not attempt to charge the battery.

High-Current Connector

First Generation Traxxas

EZ-PEAK LIVE DUAL

•

6

iD LogoBattery Type

7

•

EZ-PEAK LIVE DUAL

Balance Wires

LiPo Battery

Traxxas High-Current

Connector with iD

iD LogoBattery Type

LiPo (Lithium Polymer) batteries

are made from stacks of flat

rectangular cells so the battery

pack is rectangular, blocky, and has

square corners. LiPo batteries also

have balance connectors. For older Traxxas batteries

with first generation High-Current Connectors, the

balance connector and the multi-colored balance

wires are separate. For Traxxas iD batteries, the

balance wires are integrated into the iD High-Current

Connector (see Know your connectors on page 6).

WARNING: FIRE HAZARD!

Do not attempt to charge any battery that

has a missing or unreadable label that

prevents you from properly identifying

the battery type and specifications.

Traxxas High-Current

Know your Batteries

The EZ-Peak Live Dual is able to charge two different types (chemistries) of batteries: NiMH and LiPo.

Batteries are normally clearly labeled, but they can also be visually identified as a confirmation step.

NiMH Battery

Connector with iD

NiMH (Nickel-Metal Hydride)

batteries are constructed using

5, 6, 7, or 8 round battery cells

that are soldered together and

wrapped with heat shrink material.

NiMH batteries do not have a separate

balance wire.

Charge

Status

Charge

Progress

H

D

D

B

B

E

E

F

C

C

A

A

I

G

G

I

F. MAXX Charge Button

G. Charger Output Ports (Traxxas High-Current Connector)

H. Charger Output Port (USB) (pull to remove cover)

I. 2s/3s/4s LiPo Balance Ports (pull to remove cover)

J. Bluetooth® Button

A. Start/Stop Button

B. LiPo Charge Mode Select

C. App Live LED

D. Charge Status LED

E. Charge Progress LEDs

J

Know your Charger

EZ-PEAK LIVE DUAL

•

8

9

•

Maximum Charge Rate

™

EZ-PEAK LIVE DUAL

AC Input Power 100-240V, 50-60Hz, 2.35A

Charger Output 200W, 4-17V

Traxxas iD Battery Type Capacity EZ-Peak Live Dual

5-cell NiMH 1200-1800mAh 2A

1200-1800mAh 2A

3000-4200mAh 4A

4300-5000mAh 5A

6-cell NiMH

3000-4200mAh 4A

7-cell NiMH

4300-5000mAh 5A

3000-4200mAh 4A

8-cell NiMH

4300-5000mAh 5A

2-cell LiPo, 7.4v 2200-10000mAh 16A

3-cell LiPo,11.1v 1400-8400mAh 16A

4-cell LiPo, 14.8v 5000-6700mAh 13.4A

Charger Specifications

Start

Battery Type

NiMH with iD

Confirm that the red NiMH LED is lit

for the connected NiMH batter(ies).

The Start button(s) will light blue

connect the NiMH batter(ies) as shown

1. Plug the charger into an AC wall outlet, and then

Charging Traxxas iD NiMH Batteries

The charger will recognize the iD batter(ies)

and show you the charge settings.

2. Verify the charge settings

indicating that iD batter(ies) are

EZ-PEAK LIVE DUAL

•

connected and ready to charge.

10

Charging (flashing)

Charging Complete

(solid)

11

•

EZ-PEAK LIVE DUAL

Charge Cycle Progress

Press and hold the Start button for 2

seconds. The charger will play a tone

and the green progress LED will flash,

indicating that charging has started.

The red charge progress LEDs will light

as the batter(ies) charge. Press the Start

button at any time to stop charging.

The charger will play a tone, indicating

that charging has been canceled.

3. Charging

The charger will play a “charge complete”

tone to indicate charging is complete. The

alert tone will play 3 times and stop.

The EZ-Peak Live Dual will trickle charge

your NiMH batter(ies) at a minimum of

100mA for 12 hours after the charge

cycle is complete.

4. Charge cycle complete

Balance)

(the default is

Charge Mode

Start

LiPo with iD

Battery Type

connect the LiPo batter(ies) as shown

The charger will recognize the iD batter(ies)

and show you the charge settings.

Charging Traxxas iD LiPo Batteries

1. Plug the charger into an AC wall outlet, and then

Confirm that the green LiPo LED is lit for

the connected LiPo batter(ies). The Start

button(s) will light blue indicating that

iD batter(ies) are connected and

ready to charge.

2. Verify the charge settings

EZ-PEAK LIVE DUAL

•

12

13

•

EZ-PEAK LIVE DUAL

WARNING: FIRE HAZARD!

The fast charge LiPo setting is for occasional use only. LiPo

batteries that become severely out of balance over time can

create a hazard if one or more cells are discharged below

the recommended safe voltage during use. See additional

warnings and precautions in the beginning of this manual.

Storage Charge

Makes it easy to charge or discharge batteries to the proper storage

voltage. Use this mode whenever batteries will be stored unused for

more than 7 days.

Fast Charge

Fast charges your batteries without balancing the cells. Stops charging

when the batteries are fully charged or when the first cells reach peak

voltage. Depending on the batteries, this may reduce the charge time

by a few minutes.

Balance Charge (recommended)

Always balance charge your LiPo batteries for maximum capacity,

voltage, and battery life. This is the default setting for Traxxas iD

batteries. The EZ-Peak Live Dual performs a balance charge quickly and

efficiently.

The default LiPo charge setting is Balance Charge. You can change the LiPo charge setting, if desired.

3. Select LiPo charging mode

Charging (flashing)

Charge Cycle Progress

Charging Complete

(solid)

Press and hold the Start button for 2

seconds. The charger will play a tone

and the green progress LED will flash,

indicating that charging has started.

The red charge progress LEDs will light

as the batter(ies) charge. Press the Start

button at any time to stop charging.

The charger will play a tone, indicating

that charging has been canceled.

4. Charging

EZ-PEAK LIVE DUAL

The charger will play a “charge complete”

tone to indicate charging is complete.

The alert tone will play 3 times and stop.

5. Charge cycle complete

•

14

15

•

EZ-PEAK LIVE DUAL

Follow the

MAXX charge button. The button will

MAXX charge allows you to charge high capacity batteries at a faster charge rate. Use this feature to charge

your 5000 mAh NiMH batteries at 5 amps and your LiPo batteries at a “2C” charge rate (2C is 2 times the

capacity; 4000 mAh x 2 = 8000 mAh or 8 amps). Charging priority is given to the right charger output port

once the MAXX charge button is pressed; the left charger output port remains active, but will charge the

connected battery at a decreased charge rate.

Charging Traxxas iD Batteries using MAXX charge

Press the

flash for 3 seconds, and then turn solid green

charging steps for Traxxas iD NiMH or LiPo batteries.

to indicate MAXX charge is active.

Remote monitoring via the

The EZ-Peak Live App is updated

Note:

from the images shown.

frequently, and the actual screens may vary

The EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod touch®, or Android™ device

and links to your charger via built-in Bluetooth®. The EZ-Peak Live App (available in the Apple

App Store΢ or on Google Play™) gives you access to additional features, such as a high-definition

graphical user interface, remote monitoring and alerts for up to 4 chargers, detailed live charging

EZ-PEAK LIVE DUAL

paired. The charger and app will automatically connect

App on your mobile device.

Traxxas EZ-Peak Live Application

EZ-Peak Live App is not a substitute for being present to watch over and tend to batteries being charged.

Please see the warning about this on page 18.

Linking the App to the Charger

information, and access to full manual controls (see Advanced Mode on page 19).

1. Plug the charger into an AC wall outlet. Open the EZ-Peak Live

The blue LED will blink.

2. Press the Bluetooth® Link button on the side of the charger.

the app.

3. Within 10 seconds, tap the “Press Here to Connect” button in

blue Bluetooth® LED on the side of the charger will glow solid.

4. The Bluetooth® icon in the status bar will turn blue and the

5. The EZ-Peak Live charger and the EZ-Peak Live App are now

when the charger is powered up and the app is running.

Note: When the paired charger is selected using the EZ-Peak Live

App, the left or right App Live LED on the charger will glow solid

green to indicate which output port is active within the app.

•

16

17

•

Connected Chargers (up to 4)

iD Battery Specifications

EZ-PEAK LIVE DUAL

Charging Traxxas iD NiMH or LiPo Batteries

using the EZ-Peak Live App

When EZ-Peak Live Dual is connected, you have the ability to

configure the charger remotely from the app or you can use the

buttons on the charger. EZ-Peak Live Dual will not allow you to

start the charging process remotely via the app. It is important

to verify visually at the charger that the connected batter(ies)

match the charge mode indicated on the face of charger. Once

your charge settings are visually confirmed by you, press and hold

the Start button on the charger for 2 seconds to begin charging.

Once charging has started, you can view charge progress and

stop the charging process at any time from the app. When the

charge process is completed, the EZ-Peak Live App will play the

charge complete alert tone. These alerts can be adjusted in the

app settings. Follow the on-screen prompts to move through the

information screens provided in the app. If you have questions, tap

the Help button ? in the lower right of the app display.

iD-Only Safety Lock

The EZ-Peak Live App contains a passcode-protected safety lock that limits the charger to iD-only operation,

even when connected to the app on another iOS® or Android™ device. This feature allows the charger to be

locked so that inexperienced users (such as children) do not have access to manual settings for the charger and

the risks associated with using manual settings (see Warnings on page 2).

LiPo Charge Settings

Charge Status Charging History

Cell Voltage Checker

WARNING: FIRE HAZARD!

Never leave batteries unattended while charging. Remote monitoring via the EZ-Peak Live App

is not a substitute for being present to watch over and tend to batteries being charged. Batteries

being charged should always be visible and monitored in person in case there is an unexpected

problem that requires immediate attention.

EZ-PEAK LIVE DUAL

•

18

19

•

EZ-PEAK LIVE DUAL

WARNING! CAUTION! DANGER!

FIRE HAZARD!

IN ADVANCED MODE, THE USER SELECTS THE

BATTERY CHEMISTRY AND CHARGE MODE. THIS CREATES THE RISK OF FIRE

AND POSSIBLE INJURY TO YOURSELF AND OTHERS RESULTING FROM ACCIDENTALLY

CHOOSING TO CHARGE A LIPO BATTERY IN NIMH MODE. ALWAYS MAKE SURE TO SELECT

THE BATTERY TYPE THAT MATCHES THE CONNECTED BATTERY. ALSO, TO HELP PREVENT

ACCIDENTALLY SELECTING THE WRONG BATTERY TYPE, NEVER ATTEMPT TO CHARGE

LIPO BATTERIES WITH MISSING OR DAMAGED BALANCE CONNECTORS. IF YOU DO NOT

UNDERSTAND THE TERMINOLOGY USED IN THESE INSTRUCTIONS, KNOW WHAT TYPE OF

BATTERIES YOU HAVE, OR WHAT THIS WARNING MEANS, DO NOT USE ADVANCED

MODE; INSTEAD, CONTACT TRAXXAS FOR MORE INFORMATION.

Advanced Mode

Advanced Mode allows you to choose and configure the charge settings for the charger. Advanced Mode

is needed for charging batteries that are not equipped with iD technology. It is not possible to manually

configure your charge settings without the Traxxas EZ-Peak Live App connected to the charger.

and then connect the batter(ies) as shown

1. Open the EZ-Peak Live App on your mobile device; plug the charger into an AC wall outlet,

LiPo Only

with balance plug connected

Advanced Mode (manual settings)

Advanced Mode must be enabled by the user.

Follow the on-screen prompts in the EZ-Peak Live App.

EZ-PEAK LIVE DUAL

NiMH battery LiPo battery

•

20

21

•

EZ-PEAK LIVE DUAL

the lower right of the app display for more detail.

Tap the Help button ? in

The manual configuration wizard takes you through the setup

process by asking you questions about the batter(ies) that you

are charging.

charging mode, battery capacity, and charge rate.

The EZ-Peak Live application has several methods to manually

input the charge settings for Traxxas batteries that are not

equipped with iD:

1. Manual configuration screen (shown right)

2. Manual configuration wizard (recommended)

2. Use the EZ-Peak Live App to select the battery type,

Follow the instructions in the app.

Note that in Advanced Mode, once the charge settings are configured, the charge process cannot be started

from the app. Once the app sends these charge settings to the charger, the Start button(s) will blink green

indicating that it is ready for you to verify the connected batter(ies). Press and hold the Start button(s) to begin

the charging process.

.

Balance, Fast, or Storage Charge

WARNING: FIRE HAZARD!

If the LiPo and NiMH LEDs alternately blink, then

the balance connector is either disconnected or

damaged. This creates the risk of fire or possible

injury to youself and others. DO NOT attempt to

charge this LiPo battery.

EZ-PEAK LIVE DUAL

•

Note: If the LiPo battery type is selected, a balance plug

connection is required by the charger and the EZ-Peak Live App

before displaying the LiPo charging options. Once the charger

detects a balance plug connection, the EZ-Peak Live App will

display the charging options and you can select your preferred

charging mode:

22

Charging (flashing)

23

•

Charging Complete (solid)

EZ-PEAK LIVE DUAL

Charge Cycle Progress

Press and hold the Start button for 2

seconds. The charger will play a tone

and the green progress LED will flash,

indicating that charging has started.

The red charge progress LEDs will light

as the batter(ies) charge. Press the Start

button at any time to stop charging.

The charger will play a tone, indicating

that charging has been canceled.

3. Charging

The charger will play a “charge complete”

tone to indicate charging is complete. The

alert tone will play 3 times and stop.

4. Charge cycle complete

battery) or fully plugged into the charger (if charging an iD LiPo battery).

a. Press the Battery iD Start/Stop button to return to charger conguration.

b. Verify that the battery matches the selected type (LiPo or NiMH).

c. Verify that the balance connector is plugged into the charger (if charging a non-iD LiPo

d. Inspect the battery for any signs of damage.

LiPo battery).

a. Verify that the balance connector is plugged into the charger (if charging a non-iD

b. Disconnect the battery and check its condition. Ensure it is within safe voltage levels.

c. Use the EZ-Peak Live App to verify charge settings.

Disconnect the battery and check its condition.

Contact Traxxas Customer Support.

Power o the charger and allow it to cool before attempting to charge the battery again.

Charger Error Codes

Explanation Solution

The detected battery

charger conguration.

type does not match the

charge safely.

is too high or too low to

The battery or cell voltage

The charge cycle

timed out without

reaching the target

battery voltage.

The Traxxas battery iD

is detected but is not

readable by the charger

potential battery iD error.

or the charger detected a

The internal charger

temperature is too high.

EZ-PEAK LIVE DUAL

Error Code

If the charger detects an error during the charge process, the charge status LEDs will ash an error code.

•

24

25

•

EZ-PEAK LIVE DUAL

Disconnect the battery. DO NOT attempt to charge this battery. Contact Traxxas Customer

Explanation Solution

Balance connector is

Error Code

Charger Error Codes (continued)

Support.

damaged.

either disconnected or

Warranty Information

Traxxas electronic components are warranted to be free from defects in materials and workmanship for a period

of 30 days from the date of purchase. Limitations: Any and all warranty coverage does not cover replacement

of parts and components damaged by abuse, neglect, improper or unreasonable use, crash damage, water or

excessive moisture, chemical damage, improper or infrequent maintenance, accident, unauthorized alteration or

modification or items that are considered consumable. Traxxas will not pay for the cost of shipping or transportation

of a defective component to us. This warranty is limited to the charger only and does not cover batteries, vehicles

and other accessories used in conjunction with the charger.

Traxxas Lifetime Electronics Warranty

After the expiration date of the warranty period, Traxxas will repair electronic components for a flat rate. Please

visit Traxxas.com/support for a current schedule of warranty costs and fees. The covered repairs are limited to

non-mechanical components that have NOT been subjected to abuse, misuse, or neglect. Products damaged

EZ-PEAK LIVE DUAL

•

by intentional abuse, misuse, or neglect may be subject to additional charges. Traxxas liability, in no case, shall

be greater than the actual purchase price of this product. For replacement, product must be returned in brand

new condition, with packaging and itemized sales receipt.

Specifications are subject to change without notice. Every effort has been made to ensure the accuracy of

this Owner’s Manual and its contents; however, Traxxas cannot be held responsible for typographical or other

errors.

Apple, the Apple logo, iPhone, iPad, iPod touch, and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

Android and Google Play are trademarks of Google Inc.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Traxxas is under license. Other trademarks and trade

names are those of their respective owners.

26

27

•

EZ-PEAK LIVE DUAL

October 19, 2017

FCC Compliance

This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential

settings. This product generates, uses and can radiate radio frequency energy, and, if not operated in accordance with the

instructions, may cause harmful interference to radio communications. The user is cautioned that changes or modifications not

expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license

exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This

device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Statement

This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the

radiator and your body or bystanders and must not be co-located or operating in conjunction with any other antenna or

transmitter.

Declaration of Conformity for RED Directive

Traxxas LP hereby declares that this product is in compliance with Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available online at:

https://traxxas.com/compliance

Signed: ___________________________ Date: ___________________

27

•

EZ-PEAK LIVE DUAL

October 19, 2017

FCC Compliance

This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential

settings. This product generates, uses and can radiate radio frequency energy, and, if not operated in accordance with the

instructions, may cause harmful interference to radio communications. The user is cautioned that changes or modifications not

expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license

exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This

device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Statement

This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the

radiator and your body or bystanders and must not be co-located or operating in conjunction with any other antenna or

transmitter.

Declaration of Conformity for RED Directive

Traxxas LP hereby declares that this product is in compliance with Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available online at:

https://traxxas.com/compliance

Signed: ___________________________ Date: ___________________

27

•

EZ-PEAK LIVE DUAL

October 19, 2017

FCC Compliance

This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential

settings. This product generates, uses and can radiate radio frequency energy, and, if not operated in accordance with the

instructions, may cause harmful interference to radio communications. The user is cautioned that changes or modifications not

expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license

exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This

device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Statement

This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the

radiator and your body or bystanders and must not be co-located or operating in conjunction with any other antenna or

transmitter.

Declaration of Conformity for RED Directive

Traxxas LP hereby declares that this product is in compliance with Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available online at:

https://traxxas.com/compliance

Signed: ___________________________ Date: ___________________

Part #2973

s manual

’

1-888-TRAXXAS

Entire contents ©2017 Traxxas. All rights reserved.

owner

6250 TRAXXAS WAY, McKINNEY, TX 75070

No part of this manual may be reproduced or distributed in print or electronic media without

the express written permission of Traxxas. Specifications are subject to change without notice.

171019 HKC17008-R00