
Boat Trailer LED Light Kit Installation Instructions
Triple-axle trailer #10350 shown.
1A
Tandem-axle trailer #10650 installation similar (dierences noted).
1B
3x10mm BCS
3x8mm
BCS
3x8mm
BCS
3x8mm
BCS
3x8mm
BCS
3x8 mm
BCS
3x8 mm
BCS
Covers Part #10349X
Kit contents:
• LED light harness
• Extension harness
• Zip ties (10)
• Zip tie mounts (4)
Tools required:
• 2.0 mm hex wrench
Trailer Lights Wiring Diagram
Plug the connector into any
available channel on the
receiver (CH1-CH5). DO NOT
use the V/T or RPM ports.
3x10mm
BCS
3x10mm
BCS
3x10mm BCS
3x10mm BCS
2
3x10 mm
BCS
3x10 mm BCS
4A 4B
3x14mm BCS
Zip Tie
Mount
3x8mm
3x8mm
BCS
BCS
3
3x10 mm
BCS
3x10 mm BCS
3x8mm
BCS
3x8mm
BCS
3x8mm BCS
3x8mm
BCS
3x8mm
BCS
3x8mm
BCS
3x10mm
BCS
3x10mm
BCS
3x10mm
BCS
3x10mm
BCS
5
3x8mm BCS
3x8mm BCS
3x10mm
BCS
3x10mm
BCS
3x10mm
BCS
3x10mm
BCS
6
3x8mm BCS
3x8mm
3x8mm
3x8mm
BCS
BCS
BCS
3x8mm
BCS
3x8mm
3x8mm
3x8mm
3x8mm
BCS
BCS
BCS
BCS
3x8mm
BCS
3x8mm
BCS
3x8mm
BCS
3x8mm
BCS
3x8mm
BCS
Additional zip-tie mount for
Tamdem-Axle Trailer (#10650) only
Important: Extreme caution
must be taken during
installation to prevent
damage to the LED wires.
Use the zip ties to coil
any excess wiring harness
against the zip tie mounts
on the chassis rails. For the
rear marker lights, carefully
bend the LED wires to lie at
against the zip tie mounts.
3x10mm
BCS
3x10mm
BCS
3x10mm
BCS
3x8mm
BCS
3x8mm BCS
Zip Tie
Mount
3x10mm
BCS
If you have questions or need technical assistance, call Traxxas at
(1-888-872-9927) (U.S. residents only)
Traxxas, 6250 Traxxas Way, McKinney, TX 75070,
Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
HKC24007-R00 Rev 240906