21E Bed and Breakfast Face
Installation Instructions
Packing List
• (2) Cove Covers
• (2) Magnets
Part Numbers
Black (SKU 98500361) Brushed Nickel (98500362)
French Country Antique Gold (SKU 95700143) French Country Black (95700145)
Overview
This instruction sheet details installation of the above faces onto a 21E electric fi replace.
Cleaning Gold or Nickel Surfaces
Use denatured alcohol and a soft cloth to clean gold or nickel surfaces. Marks left on the surface may
damage the face.
Cove Cover Installation
The cove covers install over the top corners of the glass and prevent light from exiting the slots on the face.
Remove the two screws above the glass on the right side as shown below. Place the cove cover in place and
secure using the same screws. Repeat this process for the left side.
Page 1 of 2 17601621 - 6/7/10 © Travis Industries, Inc.
21E Bed and Breakfast Face
Installation Instructions
Face Installation
Place a magnet in the upper corners of the fireplace face in the cutout provided in the cove co ver (see
illustration below).
WARNING
: The powerful magnets may require pliers to properly position. Take care with the magnets to
prevent damage. Keep the magnets away from children.
Position the face so the bottom brackets insert into the slots on the lower support legs (see “a” in the
illustration below). With the brackets inserted, rotate the face forward until the magnets secure the face in
place (see “b” below).
Page 2 of 2 17601621 - 6/7/10 © Travis Industries, Inc.
Loading...