Traulsen RIH132L-FHS General Manual
Project Quantity Item #
Model Specied: CSI Section 11400
Roll-In Hot Food Holding Cabinets
To Accommodate 66" High Racks
INTELA-TRAUL®
Equipped!
Model RIH132L-FHS
Standard Product Features
• R-Series: Stainless Steel Exterior & Interior
• A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
• INTELA-TRAUL
• Ducted Fan Air Distribution System
• Standard Operating Temperature Range 135 to 180°F
• One-Time Start-Up Temperature Adjustment Feature
• ON/OFF Switch Located On Control Face
• Full Length Stainless Steel Doors With Locks
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Guaranteed For Life Horizontal Work Flow Door Handle(s)
• Standard Door Hinging: 132L = Right, 232L = Left/Right,
332L = Left/Right/Right (other hingings available)
• Automatically Activated Incandescent Lights
• Stainless Steel Breaker Caps
• Accommodates Roll-In Racks Up To 66" High (provided by
others)
• Special Heat Resistant Magnetic Snap-In Door Gaskets
• Stainless Steel Door Liner
• Stainless Steel Interior Rack Guides
• Stainless Steel Threshold Ramp(s)
• Stainless Steel One-Piece Louver Assembly
• 9' Cord & Plug Attached (one section models only)
• One Year Parts And Labor Warranty
• Two Year Control Warranty (parts and labor)
®
Microprocessor Control System
One, Two & Three Section Models, 32" Deep
1-Section Roll-In Model RIH132L-FHS
R
SERIES
Stainless Exterior
& Interior
A
SERIES
Stainless Exterior,
Anodized Alumi-
num Interior
In addition to the already outstanding cabinet construction you have
come to expect from Traulsen, these dependable roll-in hot food holding
cabinets are built using our high performance ducted fan air distribution
system . Unlike designs whic h simply radiate heat, this minimizes
temperature stratication inside the cabinet, while providing for quicker daily
start-up, lower energy usage, and reduced lifetime service costs. Each is
supplied standard with easy to operate microprocessor controls, stainless
steel exteriors, and are communications capable.
2-Section Roll-In Model RIH232L-FHS
3-Section Roll-In Model RIH332L-FHS
1-Section Roll-In Model AIH132L-FHS
2-Section Roll-In Model AIH232L-FHS
3-Section Roll-In Model AIH332L-FHS
Options & Accessories
• Stainless Steel Finished Back With Rear Louvers
• Re-Hinging Feature For Door(s)
• Wire Shelf Package For Roll-In Models (includes three wire
shelves per section)
• Additional Wire Shelves For Above
• Stainless Steel Shelf Package For Roll-In Models (includes
three stainless steel shelves per section)
• Additional Stainless Steel Shelves For Above
• Locking Hasps (padlocks supplied by others)
• 115/60/1 Voltage (single section models only)
• Export 220/50/1 Voltage
• Kool Klad Exterior Laminate Decor
• Clear Glass Door(s) In Place Of One Or More Solid Door(s)
• Fluorescent Lights
• Prison/Correctional Facilities Options
• Two Year Service/Labor Warranty Available
Listed by Underwriters Laboratories Inc.,
to U.S. and Canadian safety standards and
Listed by NSF International.
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
Approval: _______________________________________
Project Quantity Item #
Model Specied: CSI Section 11400
Specications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 nish. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. The interior
oor and exterior bottom are constructed of stainless steel and insulated with 3⁄4" of
resilient cork. A readily attachable stainless steel ramp is provided.
Doors are equipped with a heavy-duty, extruded wiper gasket for sealing to bottom
ramp, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges
include a concealed switch to automatically activate the interior incandescent
lighting. Guaranteed for life, work ow door handles are mounted horizontally over
recess in door which limits protrusion from door face into aisleways. Doors have
seamless, polished metal corners.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA R/AIH132L R/AIH232L R/AIH332L
Net capacity cu. ft. 36.0 (1020 cu l) 74.3 (2105 cu l) 117.5 (3329 cu l)
1
Length - overall in. 35
Depth - overall in. 35
⁄2 (90.2 cm) 68 (172.7 cm) 1001⁄2 (255.3 cm)
9
⁄16 (90.3 cm) 359⁄16 (90.3 cm) 359⁄16 (90.3 cm)
Depth - over body in. 32 (81.3 cm) 32 (81.3 cm) 32 (81.3 cm)
1
Depth - door open 90° in. 63
1
Clear door width in.
271⁄8 (68.8 cm) 271⁄8 (68.8 cm) 271⁄8 (68.8 cm)
Clear door height in. 66
Height - overall 83
2
RIH Net Wt. lbs.
AIH Net Wt. lbs.
350 (159 kg) 580 (263 kg) 1075 (488 kg)
2
280 (127 kg) 480 (218 kg) 1000 (454 kg)
⁄4 (160.7 cm) 631⁄4 (160.7 cm) 631⁄4 (160.7 cm)
5
⁄16 (168.4 cm) 665⁄16 (168.4 cm) 665⁄16 (168.4 cm)
1
⁄4 (211.5 cm) 831⁄4 (211.5 cm) 831⁄4 (211.5 cm)
Rack Capacity 1 2 3
ELECTRICAL DATA
Voltage 208/115/60/1 208/115/60/1 208/115/60/1
Feed wires with Ground 4 4 4
Wattage @ 208V 1500 3000 3000
Full load amperes @ 208V 7.8 15.5 15.5
SHIPPING DATA
Length - crated in. 41 (104 cm) 73 (160 cm) 106 (269 cm)
Depth - crated in. 44 (112 cm) 44 (112 cm) 44 (112 cm)
1
Height - crated in. 90
⁄2 (230 cm) 901⁄2 (230 cm) 901⁄2 (230 cm)
Volume - crated cu. ft. 95 (2691 cu l) 168 (4759 cu l) 250 (7082 cu l)
NOTE: Figures in parentheses reect metric equivalents.
1= Please note that the available cabinet width narrows for 6" from the top of the door frame to 25-7/8" in
order to allow for the heater fans.
2= For shipping weights and dimensions please refer to form TR35875.
NOTES
Heating System
A low watt density, serpentine style, heater is employed for the generation of electric
heat. Low velocity air is forced across its large surface area to efciently move heat
radiating away from these through a down-air distribution duct, where it is then evenly
distributed throughout the cabinet, assuring the proper holding environment for hot
food product, without drying. A vent, located at the top of the cabinet, is included
for positive humidity control.
Controller
The easy to use, water resistant INTELA-TRAUL
is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, ON/OFF Button, Fahrenheit
or Celsius Temperature Scale Display Capability, One-Time Start-Up Temperature
Adjustment Feature, and an RS485 data port. In addition it includes audio/visual
alarms for: Hi/Lo Cabinet Temperature, Door Open and Power Supply Interruption.
Interior
Readily removable, interior-mounted, stainless steel guides for rack are provided
for protection. Maximum rack size with wheels inboard of frame is 27" wide by 29"
deep by 66" high. Racks supplied by others.
Warranties
A one year parts and labor warranty is provided standard. An optional 2
extended parts and labor warranty is also available. In addition the INTELA-TRAUL®
control is warranted by a two year parts and labor warranty.
Elevation R/AIH132L
Elevation R/AIH232L
®
microprocessor control system
Elevation R/AIH232L
Plan - R/AIH132L
Plan - R/AIH232L
nd
year
Equipped With One NEMA L14-20P Plug
(one section models only)
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.
Continued product development may necessitate specication changes without notice.
Part No. TR35792 (revised 12/10)
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
Plan - R/AIH332L
Section - All Models
Loading...