Traulsen RIF332LUT-FHS, AIF232LUT-FHS, AIF332LUT-FHS, AIF132LUT-FHS, RIF132LUT-FHS User Manual

Project Quantity Item #

Model Specified: CSI Section 11400

Roll-In Freezer Models For

66" High Racks/Self-Contained

INTELA-TRAUL

Equipped!

®

Model RIF332LUT-FHS

Standard Product Features

• R-Series: Stainless Steel Exterior & Interior

• A-Series: Stainless Steel Exterior/Anodized Aluminum Interior

• INTELA-TRAUL® Microprocessor Control System

• Balanced, Self-Contained Refrigeration System Using R-404A

• Scroll Blower Type Evaporator Fan

• Biased Return Air Duct

• Full Length Stainless Steel Doors With Locks

• Self-Closing Doors With Stay Open Feature At 120 Degrees

• Guaranteed For Life Cam-Lift Hinges

• Guaranteed For Life Horizontal Work Flow Door Handle(s)

• Standard Door Hinging: 132L = Right, 232L = Left/Right,

332L = Left/Right/Right (other hingings available)

• Automatically Activated Incandescent Lights

• Stainless Steel Breaker Caps

• Accommodates Roll-In Racks Up To 66" High (provided by

others)

• Automatic Non-Electric Condensate Evaporator

• Magnetic Snap-In Door Gaskets

• Gasket Protecting Metal Door Liner

• Controllable Anti-Condensate Door Perimeter Heaters

• Thermostatic Expansion Valve Metering Device

• Stainless Steel One-Piece Louver Assembly

• Stainless Steel Interior Rack Guides & Threshold Ramp(s)

• 9' Cord & Plug Attached

• One Year Parts And Labor Warranty

• Two Year Control Warranty (parts and labor)

• Five Year Compressor Warranty

One, Two & Three Section Models, 32" Deep

1-Section Solid Door Model RIF132LUT-FHS

R

SERIES

Stainless Exterior

& Interior

A

SERIES

Stainless Exterior,

Anodized

Aluminum Interior

The R & A Series represent Traulsen's Top-of-the-Line product offering. The
“L-Height” roll-in freezer models are all designed to offer convenient
interior storage for 66" high racks. Each is supplied standard with such high
quality features as easy to operate microprocessor controls,
balanced refrigeration systems and stainless steel exteriors. Additionally,
they offer the widest range of optional accessories to choose from, and can
be specified for use with many different applications, including: Foodservice,
Correctional, Institutional, Export, etc.

2-Section Solid Door Model RIF232LUT-FHS
3-Section Solid Door Model RIF332LUT-FHS

1-Section Solid Door Model AIF132LUT-FHS
2-Section Solid Door Model AIF232LUT-FHS
3-Section Solid Door Model AIF332LUT-FHS

Options & Accessories

• Stainless Steel Finished Back With Rear Louvers

• Re-Hinging Feature For Door(s)

• Chrome Plated Shelf Package For Roll-In Models (includes

three chrome plated shelves per section)

• Additional Chrome Plated Shelves For Above

• Stainless Steel Shelf Package For Roll-In Models (includes

three chrome plated shelves per section)

• Additional Stainless Steel Shelves For Above

• Locking Hasps (padlocks supplied by others)

• Export 220/50/1 Voltage

• Kool Klad Exterior Laminate Decor

• Recessed Installation

• Prison/Correctional Facilities Options

• Two Year Service/Labor Warranty Available

Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

Approval: ___________________________________

SECTION

1-15

Project Quantity Item #

Model Specified: CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet
top, back and bottom are constructed of heavy gauge aluminized steel. The interior
floor is constructed of stainless steel and insulated with 3⁄4" of resilient cork. A readily
attachable stainless steel ramp is provided to facilitate loading/unloading.

Doors are equipped with a heavy-duty, extruded wiper gasket for sealing to bottom
ramp, removable plug cylinder locks and guaranteed for life cam-lift, gravity action,
self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges
include a concealed switch to automatically activate the interior incandescent light­ing. Guaranteed for life, work flow door handles are mounted horizontally over
recess in door which limits protrusion from door face into aisleways. Doors have
seamless, polished metal corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.

Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA R/AIF132LUT R/AIF232LUT R/AIF332LUT

Net capacity cu. ft. 36.0 (1020 cu l) 74.3 (2105 cu l) 117.5 (3329 cu l)

Length - overall in. 351⁄2 (90.2 cm) 68 (172.7 cm) 1001⁄2 (255.3 cm)

Depth - overall in. 359⁄16 (90.3 cm) 359⁄16 (90.3 cm) 359⁄16 (90.3 cm)

Depth - over body in. 32 (81.3 cm) 32 (81.3 cm) 32 (81.3 cm)

Depth - door open 90° in. 631⁄4 (160.7 cm) 631⁄4 (160.7 cm) 631⁄4 (160.7 cm)

Clear door width in. 271⁄8 (68.8 cm) 271⁄8 (68.8 cm) 271⁄8 (68.8 cm)

Clear door height in. 665⁄16 (168.4 cm) 665⁄16 (168.4 cm) 665⁄16 (168.4 cm)

Height - overall in. 831⁄4 (211.5 cm) 831⁄4 (211.5 cm) 831⁄4 (211.5 cm)

RIF Net Wt. lbs. 525 (238 kg) 820 (372 kg) 1130 (513 kg)

AIF Net Wt. lbs. 475 (215 kg) 720 (327 kg) 1090 (494 kg)

Rack Capacity - 66" High 1 2 3

ELECTRICAL DATA

Voltage 115/60/1 208-230/115/60/1 208-230/115/60/1

Feed wires with Ground 3 4 4

Full load amperes 11.5 9.4 15.8

REFRIGERATION DATA

Refrigerant R-404A R-404A R-404A

BTU/HR H.P.

NOTE: Figures in parentheses reflect metric equivalents.
1= Based on a 90 degree F ambient and -20 degree F evaporator.
2= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information

1

on remote models, please refer to spec sheet 12-2.

2160 (1⁄2 HP) 4710 (1 HP) 5560 (2 x 3⁄4 HP)

NOTES

Refrigeration System

A top mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil
located outside the food zone and a top mounted non-electric condensate
evaporator. Biased return air duct protects against introduction of warm kitchen air,
promoting even temperature maintenance and efficient operation. A 9'
cord and plug is provided. Standard operating temperature is 0 to -5°F.

Controller

The easy to use water resistant INTELA-TRAUL
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockouts, and an RS485 data port.
In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open,
Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power
Supply Interruption.

Interior

Readily removable, interior-mounted, stainless steel guides for rack are provided for
protection. Maximum rack size with wheels inboard of frame is 27" wide by 29" deep
by 66" high. Racks supplied by others.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self­contained models only) are provided standard. An optional 2
and labor warranty is also available. In addition the INTELA-TRAUL® control is
warranted by a two year parts and labor warranty.

Elevation -

R/AIF132LUT

Elevation -

R/AIF232LUT

®

microprocessor control system is

nd

year extended parts

Elevation -

R/AIF332LUT

One Section Models Equipped
With One NEMA 5-15P Plug

Two & Three Section Models Equipped
With One NEMA L14-20P Plug

NOTE: Full load amps and plug style may vary depending
on electrical options chosen and condensing unit employed.

In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.

Continued product development may necessitate specification changes without notice.
Part No. TR35769 (revised 1/07)

SECTION

1-15

REQUIRED CLEARANCES

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

Plan - R/AIF132LUT

Plan - R/AIF332LUT

Plan - R/AIF232LUT

Section - All Models