
Project Quantity Item #
Model Specied: CSI Section 11400
Roll-In Double Depth Refrigerators and
Freezer Models/Self-Contained
Includes Traulsen's patented
INTELA-TRAUL® control
Model RRI264LUT-FHS
Two & Three Section Roll-In Models - 64" Deep
2-Section Refrigerator Model RRI264LUT-FHS
R
SERIES
Stainless Exterior
& Interior
The R-Series "L-Height" Roll-In Double Depth Refrigerator and Freezer
lines are designed to offer storage capacity and easy access for 66"
high racks. They are supplied standard with all the Traulsen top of the
line features, such as balanced refrigeration systems, next generation
INTELA-TRAUL® controls and stainless steel exteriors. Additionally,
they offer the widest range of optional accessories, and can be modi-
ed for many applications, such as: correctional, export, etc. Racks are
not supplied by Traulsen.
3-Section Refrigerator Model RRI364LUT-FHS
2-Section Freezer Model RIF264LUT-FHS
3-Section Freezer Model RIF364LUT-FHS
Standard Product Features
• Stainless Steel Exterior & Interior
• INTELA-TRAUL® Microprocessor Control System
• Balanced, Self-Contained Refrigeration System Using
R-134A or R-404A Refrigerant
• Full Length Stainless Steel Doors With Locks
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Guaranteed For Life Horizontal Work Flow Door Handle
• Standard Door Hinging: 232L = Left/Right,
332L = Left/Right/Right (other hingings available)
• Automatically Activated Incandescent Lights
• Stainless Steel Breaker Caps
• Accommodates Roll-In Racks Up To 66" High (provided by
others)
• Automatic Non-Electric Condensate Evaporator (refrigerator
models only)
• Magnetic Snap-In Door Gaskets
• Stainless Steel Door Liner
• Stainless Steel Interior Rack Guides
• Stainless Steel Threshold Ramps
• Controllable Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device
• Stainless Steel One-Piece Louver Assembly
• One Year Parts And Labor Warranty
• Two Year Control Warranty (parts and labor)
• Five Year Compressor Warranty
Options & Accessories
• Stainless Steel Finished Back With Rear Louvers
• Re-Hinging Feature For Doors
• Wire Shelf Package For Roll-In Model (includes three
shelves per section)
• Additional Wire Shelves For Above
• Stainless Steel Shelf Package For Roll-In Model (includes
three shelves per section)
• Additional Stainless Steel Shelves For Above
• Locking Hasps (padlocks supplied by others)
• Kool Klad Exterior Laminate Decor
• Floor Mounted Electric Condensate Evaporator (for use with
freezer models only)
• Clear Glass Doors (refrigerator models only)
• Fluorescent Lights (refrigerator models only)
• Prison/Correctional Facilities Options
• Remote Applications (see spec sheet TR35837 for more
details)
• Two Year Service/Labor Warranty Available
Approval: __________________________________
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com

Project Quantity Item #
Model Specied: CSI Section 11400
Specications
Construction, Hardware and Insulation
Cabinet exterior, including front, one piece sides, louver assembly and doors are
constructed of heavy gauge stainless steel. Cabinet interior and door liners are
constructed of stainless steel. Exterior cabinet top, back and bottom are constructed
of heavy gauge aluminized steel. The interior oor is constructed of stainless steel
and insulated with 3⁄4" of resilient cork. A readily attachable stainless steel ramp is
provided.
Doors are equipped with heavy-duty, extruded wiper gasket for sealing to bottom ramp, removable plug cylinder locks and guaranteed for life cam-lift, gravity
action, self-closing metal, glide hinges with stay open feature at 120 degrees.
Hinges include a switch to automatically activate the interior incandescent lighting.
Guaranteed for life, work ow door handle is mounted horizontally over recess in
door which limits protrusion from door face into aisleways.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Cabinet and door contains high density, non-CFC, foamed in place polyurethane
insulation.
Controller
The easy to use water resistant INTELA-TRAUL® microprocessor control system
is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required
for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockout Feature (freezer models only)
and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet
Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line
Sensor Failures, and Power Supply Interruption.
Refrigeration System - Refrigerator Models
A top mounted, self-contained, balan ced refr iger atio n system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. It features
a plenum effect blower coil, large, high humidity evaporator coil located outside
the food zone, and a top mounted non-electric condensate evaporator. Standard
operating temperature is 36 to 38°F.
Refrigeration System - Freezer Models
A top mounted, self-contained, balanced refrigeration system usi ng R-404 A
refrigerant is conveniently located behind the one piece louver assembly. It features
a plenum effect blower coil, large, high humidity, interior mounted mullion coils, and
an automatic preset time activated electric defrost. A oor drain or optional electric
condensate evaporator is required for condensate removal. Standard operating
temperature is 0 to -5°F.
Interior
Readily removable, interior-mounted, stainless steel guides for rack are provided for
protection. Maximum rack size with wheels inboard of frame is 27" wide by 29" deep
by 66" high. Racks supplied by others.
Warranties
Both a one year parts and labor warranty and a ve year compressor warranty
(self-contained models only) are provided standard. An optional 2nd year extended
parts and labor warranty is also available. In addition the INTELA-TRAUL® control is
warranted by a two year parts and labor warranty.
DIMENSIONAL DATA RRI264LUT RRI364LUT RIF264LUT RIF364LUT
Net capacity cu. ft. 154.5 (4377 cu l) 239.0 (6771 cu l) 154.5 (4377 cu l) 239.0 (6771 cu l)
Length - overall in. 68 (172.7 cm) 1001⁄2 (255.3 cm) 68 (172.7 cm) 1001⁄2 (255.3 cm)
Depth - overall in. 679⁄16 (171.6 cm) 679⁄16 (171.6 cm) 679⁄16 (171.6 cm) 679⁄16 (171.6 cm)
Depth - over body in. 64 (162.6 cm) 64 (162.6 cm) 64 (162.6 cm) 64 (162.6 cm)
Depth - with door open 951⁄4 (241.9 cm) 951⁄4 (241.9 cm) 951⁄4 (241.9 cm) 951⁄4 (241.9 cm)
90 degrees in.
Clear door width in. 271⁄16 (68.8 cm) 271⁄16 (68.8 cm) 271⁄16 (68.8 cm) 271⁄16 (68.8 cm)
Clear door height in. 665⁄16 (168.4 cm) 663⁄8 (168.6 cm) 665⁄16 (168.4 cm) 663⁄8 (168.6 cm)
Height - overall in. 831⁄4 (211.5 cm) 831⁄4 (211.5 cm) 831⁄4 (211.5 cm) 831⁄4 (211.5 cm)
Rack Capacity 4 6 4 6
Net Wt. lbs. 700 (318 kg) 980 (445 kg) 820 (372 kg) 1130 (513 kg)
ELECTRICAL DATA
Voltage 208-230/115/60/1 208-230/115/60/1 208-230/115/60/1 208-230/115/60/1
Feed wires with Ground 4 4 4 4
Full load amperes 17.0 19.2 22.0 31.6
Wattage1 2475 2795 3660 5258
REFRIGERATION DATA
Refrigerant R-134a R-134a R-404A R-404A
BTU/HR H.P.2 8400 (2 x 1⁄2 HP) 10240 (2 x 3⁄4 HP) 10440 (2 x 1 HP) 15160 (4 x 3⁄4 HP)
NOTE: Figures in parentheses reect metric equivalents.
1= Based on a 90 degree F ambient and 20 degree F evaporator for refrigerators and a 90 degree F
ambient and -10 degree F evaporator for freezers.
2= Wattage is determined by listed amps X listed volts X an average run time of 70% for refrigerators and
80% for freezers.
3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other
information on remote models, please refer to spec sheet TR35837.
4= Shipped in two cartons for assembly at job site. For total shipping weight, double gure shown.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and
any additional warranties. For fast order entry: Fax 1 (800) 765-8728.
Continued product development may necessitate specication changes without notice.
Part No. TR35808 (revised 4/10)
NOTES
In order to assure optimum performance, the condensing unit MUST have an adequate supply
of air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air ow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.
REQUIRED CLEARANCES
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com