• Scroll Blower Type Evaporator Fan & Biased Return Air Duct
• Full Length Stainless Steel Doors
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges & Door Handles
• Automatically Activated Incandescent Lights
• Stainless Steel Breaker Caps
• Automatic Non-Electric Condensate Evaporator
• Magnetic Snap-In EZ-Clean Door Gasket(s)
• Gasket-Protecting Metal Door Liners (reach-in/pass-thru
models only)
• Controllable Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device
• Three Year Parts And Labor Warranty
• Five Year Compressor Warranty
Corrections Feature Package
Correctional Offering Summary
1 & 2 Section Reach-In Refrigerator Models
R
SERIES
Stainless Exterior
& Interior
Traulsen's already durable, energy efcient R-Series reach-in-pass-thru and
roll-in/roll-thru models are available already built with all the features needed
for use in a corrections environment.
These reliable models are optimized for the demanding needs of all security
levels, and each is built with microprocessor controls, communications
ability and stainless steel cabinet interior/exterior construction.
The correctional package is designed to protect the cabinet from unwanted
damage/vandalism, removal of contents or components, as well as from
being pushed over (see details below).
Three section, as well as models with half-height doors and other hingings
are also available upon request.
• Standard Operating Temperature Range 135 to 180°F
• One-Time Start-Up Temperature Adjustment Feature
• ON/OFF Switch Located On Control Face
• Full Length Stainless Steel Doors
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges & Handles
• Automatically Activated Incandescent Lights
• Stainless Steel Breaker Caps
• Special Heat Resistant Magnetic Snap-In Door Gaskets
• Gasket Protecting Metal Door Liners (reach-in/pass-thru
models only)
• Three Year Parts And Labor Warranty
• Lexan Control Cover Protects This From Damage While
Allowing Full Visibility & Use
• Stainless Steel Screen Protects The Refrigeration System
From Damage or Unwanted Removal of Components
• Use of Safety Screws Throughout Secures All Cabinet Components From Unwanted Removal
• Locking Hasps Secure Cabinet Contents (padlocks supplied
by others)
• No Hinge or Light Covers
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
• 12 Pairs Universal Type Tray Slides Welded To A Steel
Frame Per Section (maximum per section) To Accommodate
Either (1) 18" x 26" or (2) 14" x 18" Pans, or (2) 12" x 20"
Pans (reach-in/pass-thru models only)
• 6" High Stainless Steel Flanged Legs To Allow For Secure
Mounting To Floor (reach-in/pass-thru models only)
1= Traulsen recommends use of tray slides for all correctional applications
Listed by Underwriters Laboratories Inc.,
to U.S. and Canadian safety standards and
Listed by NSF International.
RI132LP-COR01 29-7/8" Wide Roll-Thru Hot Food FHR/RHR
RI132LP-COR02 29-7/8" Wide Roll-Thru Hot Food FHL/RHL
RI232L-COR01 58" Wide Roll-In Hot Food L/R
RI232LP-COR01 58" Wide Roll-Thru Hot Food FHS/RHS
L = Left
R = Right
L/R = Left Door Hinged Left/Right Door Hinged Right
FHL/FHL = Control Side Hinged Left/Other Side Hinged Left
FHR/FHR = Control Side Hinged Right/Other Side Hinged Right
FHS/FHS = Control Side Hinged Left/Right/Other Side Hinged Left/Right
Door Hinging Legend
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
All Single Section Pass-Thru Models
Plan View
Section View
All Reach-In Models
Plan View
All Two Section Pass-Thru Models
Section View
All Pass-Thru Models
Page 3
Project Quantity Item #
Model Specied: CSI Section 11400
Reach-In & Pass-Thru Hot Food Cabinets
Elevation View
All Single Section Models
Plan View
All Single Section Reach-In Models
Elevation View
All Two Section Models
Plan View
All Two Section
Roll-In Models
Roll-In & Roll-Thru Models
Elevation View
All Single Section Models
Plan View
All Single Section Roll-In Models
Elevation View
All Two Section Models
Plan View
All Two Section Roll-In Models
All Single Section Pass-Thru Models
Plan View
Section View
All Reach-In Models
Plan View
All Two Section Pass-Thru Models
Section View
All Pass-Thru Models
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
All Single Section Roll-Thru Models
Plan View
Section View
All Single Section Roll-In Models
Plan View
All Two Section Roll-Thru Models
Section View
All Two Section Roll-Thru Models
Page 4
Project Quantity Item #
Model Specied: CSI Section 11400
Construction, Hardware and Insulation
Cabinet exterior, interior, louver assembly and doors are constructed of stainless
steel. The exterior cabinet top, back and bottom are constructed of heavy gauge
aluminized steel. On roll-in/roll-thru models the interior oor and exterior bottom
are constructed of stainless steel and insulated with
3
⁄4" of resilient cork (a readily
attachable stainless steel ramp is also provided). A set of four (4) adjustable 6" high
stainless steel anged legs are included to provide for secure mounting to the oor
(reach-in/pass-thru models only).
Doors are provided with locking hasps and equipped with a gasket protecting
metal door pan (reach-in/pass-thru models only), removable plug cylinder locks and
guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay
open feature at 120 degrees. Hinges include a concealed switch to automatically
activate the interior incandescent lighting. Guaranteed for life, work ow door handles
are mounted horizontally over recess in door which limits protrusion from door face
into aisleways.
Safety screws are used throughout the cabinet in order to prevent removal with
anything but a very specialized tool. Easily removable for cleaning, vinyl magnetic
door gaskets assure tight door seal. Anti condensate heaters are located behind
each door opening (refrigerator & freezer models only).
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
Controller
The easy to use water resistant INTELA-TRAUL
®
microprocessor control system
is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required
for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, and an RS485 data port. In addition it
includes, where applicacable, audio/visual alarms for: Hi/Lo Cabinet Temperature,
Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures,
and Power Supply Interruption. Hot food holding cabinet models also include an
ON/OFF button. The control is protected behind a high-impact resistant lexan cover.
DIMENSIONAL DATA Cu. Ft. W x H x D2 Weight Voltage Amps Refrigerant BTU/HR (HP)1 Plug
1-Section Reach-In Refrigerator 21.9 26
2-Section Reach-In Refrigerator 46.0 52
1-Section Pass-Thru Refrigerator 22.7 26
2-Section Pass-Thru Refrigerator 48.3 52
1-Section Reach-in Freezer 21.9 26
2-Section Reach-In Freezer 46.0 52
1-Section Reach-In Heated 24.2 29
2-Section Reach-In Heated 46.0 58
1-Section Pass-Thru Heated 26.1 29
2-Section Pass-Thru Heated 55.8 58
1-Section Roll-In Refrigerator 36.0 35
2-Section Roll-In Refrigerator 74.3 68
1-Section Roll-Thru Refrigerator 38.8 35
2-Section Roll-Thru Refrigerator 80.2 68
1-Section Roll-In Heated 36.0 35
2-Section Roll-In Heated 74.2 68
1-Section Roll-Thru Heated 38.8 35
2-Section Roll-Thru Heated 80.2 68
1= Based on a 90 degree F ambient and 20 degree F evaporator for refrigerator models and 90 degree F ambient and -15 degree F evaporator for freezer models.
2= 12" Top clearance preferred for optimum performance and service access.
3
⁄8 x831⁄4 x 35 330 Net 115/60/1 6.0 R-134a 1730 (1⁄4 HP) 5-15P
1
⁄8 x831⁄4 x 35 560 Net 115/60/1 10.4 R-134a 4200 (1⁄2 HP) 5-15P
⁄8 x831⁄4 x 3715⁄16565 Net 115/60/1 11.0 R-134a 4200 (1⁄2 HP) 5-15P
3
⁄8 x831⁄4 x 35 330 Net 115/60/1 9.8 R-404A 2170 (1⁄2 HP) 5-15P
1
⁄8 x831⁄4 x 35 560 Net 115/60/1 14.9 R-404A 3790 (1⁄4 HP) 5-20P
7
⁄8 x831⁄4 x 35 320 Net 208/115 7.8 n/a n/a L14-20P
1
x83
⁄4 x 35 530 Net 208/115 15.5 n/a n/a n/a
7
⁄8 x831⁄4 x 3715⁄16 345 Net 208/115 7.8 n/a n/a L14-20P
1
x83
⁄4 x 3715⁄16 585 Net 208/115 15.5 n/a n/a n/a
1
⁄2 x831⁄4 x 359⁄16435 Net 115/60/1 10.6 R-134a 2220 (1⁄3 HP) 5-15P
1
x83
⁄4 x 359⁄16700 Net 115/60/1 11.4 R-134a 4200 (1⁄2 HP) 5-15P
1
⁄2 x831⁄4 x 391⁄8490 Net 115/60/1 11.6 R-134a 2220 (1⁄3 HP) 5-15P
1
x83
⁄4 x 391⁄8775 Net 115/60/1 13.4 R-134a 4200 (1⁄2 HP) 5-20P
1
⁄2 x831⁄4 x 359⁄16350 Net 208/115 7.8 n/a n/a L14-20P
1
x83
⁄4 x 359⁄16 580 Net 208/115 15.5 n/a n/a n/a
1
⁄2 x831⁄4 x 391⁄8 375 Net 208/115 7.8 n/a n/a L14-20P
1
x83
⁄4 x 391⁄8630 Net 208/115 15.5 n/a n/a n/a
NOTES
Refrigeration System (refrigerator & freezer models only)
A top mounted, self-contained, balanced refrigeration system using either R-134a
(refrigerators) or R-404A (freezers) refrigerant is conveniently located behind the
one piece louver assembly, and protected behind a heavy gauge stainless steel
mesh screen. It features an easy to clean front facing condenser, thermostatic
expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large,
high humidity evaporator coil located outside the food zone and a top mounted
non-electric condensate evaporator. Biased return air duct protects against intro-
duction of warm kitchen air, promoting even temperature maintenance and efcient
operation. A 9' cord and plug is provided. Standard operating temperature is 34 to
38°F for refrigerators and 0 to -5°F for freezers.
Heating System (hot food holding cabinets only)
A low watt density, serpentine style, heater is employed for the generation of electric
heat. Low velocity air is forced across its large surface area to efciently move heat
radiating away from these through a down-air distribution duct, where it is then evenly
distributed throughout the cabinet, assuring the proper holding environment for hot
food product, without drying. A vent, located at the top of the cabinet, is included
for positive humidity control.
Reach-in/Pass-Thru Model Interior
Standard interior arrangements include 12 pairs of universal tray slides per section,
welded to a steel frame in order to prevent removal.
Roll-In/Roll-Thru Model Interior
Readily removable, interior-mounted, stainless steel guides for rack are provided
for protection. Maximum rack size with wheels inboard of frame is 27" wide by 29"
deep by 66" high. Racks supplied by others.
Warranties
Both a three year parts and labor warranty and a ve year compressor warranty
(refrigerator & freezer models only) are provided standard.
Specications
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.
Continued product development may necessitate specication changes without notice.
Part No. TR35914 (REV. 10-15-13)
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.