Page 1
Project Quantity Item #
Model Specified: CSI Section 11400
"D-Width" Reach-In Refrigerator-Freezer
Models/Self-Contained
INTELA-TRAUL
Equipped!
®
Model RDT132DUT-HHS
(shown with optional casters)
Standard Product Features
• R-Series: Stainless Steel Exterior & Interior
• A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
• INTELA-TRAUL® Microprocessor Control System
• Balanced, Self-Contained Dual Refrigeration Systems Using
R-134a & R-404A Refrigerants
• Scroll Blower Type Evaporator Fan (2 section models only)
• Biased Return Air Duct (2 section models only)
• Full or Half Length Stainless Steel Doors With Locks (full-
length doors n/a on one-section models)
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Guaranteed For Life Horizontal Work Flow Door Handle
• Standard Door Hinging: 132D = Right, 232D = Left/Right (other
hingings not available for 2-section models)
• Automatically Activated Incandescent Lights
• Stainless Steel Breaker Caps
• Chrome Plated Adjustable Shelves (installed at the factory)
• Automatic Non-Electric Condensate Evaporator (2 section
models only)
• Magnetic Snap-In Door Gaskets
• Gasket Protecting Metal Door Liner
• Controllable Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device
• Stainless Steel One-Piece Louver Assembly
• 9' Cord & Plug Attached
• Set of Four (4) 6" High Adjustable Stainless Steel Legs
• One Year Parts And Labor Warranty
• Two Year Control Warranty (parts and labor)
• Five Year Compressor Warranty
One & Two Section Models, 32" Deep
2-Section Full Length Door Model RDT232DUT-FHS
R
SERIES
Stainless Exterior
& Interior
A
SERIES
Stainless Exterior,
Anodized
Aluminum Interior
The R & A Series represent Traulsen's Top-of-the-Line product offering. The
“D-Width” reach-in refrigerator/freezer models are all designed to offer
maximum interior storage capacity. Each is supplied standard with such high
quality features as balanced refrigeration systems, microprocessor controls,
communications ability and stainless steel exteriors. Additionally, they offer
the widest range of optional accessories to choose from, and can be
specified for use with many different applications, including: Foodservice,
Correctional, Institutional, Export, etc.
1-Section Half Length Door Model RDT132DUT-HHS
2-Section Half Length Door Model RDT232DUT-HHS
2-Section Full Length Door Model ADT232DUT-FHS
1-Section Half Length Door Model ADT132DUT-HHS
2-Section Half Length Door Model ADT232DUT-HHS
Options & Accessories
• Stainless Steel Finished Back With Rear Louvers
• Re-Hinging Feature For Door(s)
• No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
• No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans, Adjustable To 2" O.C.
• Additional Chrome Plated Shelves
• Stainless Steel Shelves In Lieu of Standard Chrome Plated
• Kool Klad Exterior Laminate Decor
• Set of Four (4) 6" High Casters In Lieu of Legs
• Set of Four (4) 4-5/8" High Casters In Lieu of Legs
• 4-1/2" High Stainless Steel Base In Lieu of Legs
• 6" High Stainless Steel Kickplate (for use with standard legs)
• Remote Applications (see spec sheet 12-2 for more details)
• Clear Glass Door(s) In Place Of One Or More Refrigerator
Section Door(s)
• Two Year Service/Labor Warranty Available
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
Approval: ___________________________________
SECTION
3-3
Page 2
Elevation - R/ADT132DUT
Plan - R/ADT132DUT
SECTION
3-3
Section - R/ADT132DUT
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
Page 3
Elevation - R/ADT232DUT
Plan - R/ADT232DUT
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
Section - R/ADT232DUT
SECTION
3-3
Page 4
Project Quantity Item #
Model Specified: CSI Section 11400
Specifications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet
top, back and bottom are constructed of heavy gauge aluminized steel. A set of four
(4) adjustable 6" high stainless steel legs are included.
Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways. Doors have seamless, polished metal
corners.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA R/ADT132DUT R/ADT232DUT
Net capacity total cu. ft. 15.6 (442 cu l) 38.0 (1076 cu l)
Net capacity refrig. cu. ft. 8.0 (227 cu l) 23.5 (665 cu l)
Net capacity freezer cu. ft. 7.6 (215 cu l) 14.5 (411 cu l)
Length - overall in. 24 (61.0 cm) 48 (121.9 cm)
Depth - overall in. 35 (88.8 cm) 35 (88.8 cm)
Depth - over body in. 32 (81.3 cm) 32 (81.3 cm)
Depth - door open 90° in. 543⁄4 (139.1 cm) 543⁄4 (139.1 cm)
Clear door width in. 185⁄8 (47.3 cm) 199⁄16 (49.7 cm)
Clear half-door height in. 271⁄2 (69.9 cm) 271⁄2 (69.9 cm)
Clear full-door height in. n/a 575⁄8 (146.3 cm)
Height - overall on 6" legs 831⁄4 (211.5 cm) 831⁄4 (211.5 cm)
No. Standard Shelves 2 6
Shelf area total sq. ft.
Shelf area refrig. sq. ft.
Shelf area freezer sq. ft.
1
1
1
28.0 (2.6 sq m) 37.6 (3.49 sq m)
7.1 (.7 sq m) 14.2 (1.3 sq m)
7.1 (.7 sq m) 14.2 (1.3 sq m)
RDT Net Wt. lbs. 455 (206 kg) 665 (302 kg)
ADT Net Wt. lbs. 405 (184 kg) 585 (265 kg)
ELECTRICAL DATA
Voltage 115/60/1 115/60/1
Feed wires with Ground 3 3
Full load amperes 10.7 16.0
REFRIGERATION DATA
Refrigerant - Refrigerator R-134a R-134a
Refrigerant - Freezer R-404A R-404A
BTU/HR H.P. - Refigerator
BTU/HR H.P. - Freezer
NOTE: Figures in parentheses reflect metric equivalents.
1= Area of standard shelf compliment only, does not include storage area of additional shelves or available
on cabinet bottom.
2= Based on a 90 degree F ambient and 20 degree F evaporator for the refrigerated section and a 90
degree F ambient and -20 degree F evaporator for the freezer section.
3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other
information on remote models, please refer to spec sheet 12-2.
2
2
1130 (1⁄5 HP) 1730 (1⁄4 HP)
1440 (1⁄3 HP) 2170 (1⁄2 HP)
NOTES
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-134a and
R-404A refrigerants is conveniently located behind the one piece louver assembly.
Two section models feature an easy to clean front facing condenser, thermostatic
expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large,
high humidity evaporator coil located outside the food zone and a top mounted nonelectric condensate evaporator. One section models feature an interior mounted
coil and bottom mounted condensate evaporator.
Biased return air duct protects against introduction of warm kitchen air, promoting
even temperature maintenance and efficient operation.
A 9' cord and plug is provided standard. Standard operating temperatures are 34 to
38°F for the refrigerator compartment and 0 to -5°F for the freezer compartment.
Controller
The easy to use water resistant INTELA-TRAUL
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, and an RS485 data port. In addition it
includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean
Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply
Interruption. A separate control is provided for both the refrigerator and freezer
compartments.
Interior
Standard interior arrangements include three (3) chrome plated wire shelves per
section, mounted on shelf pins (one section models are supplied standard with two
chrome plated shelves). Shelves are full-width, and do not have any large gaps
between them requiring the use of "bridge" or "junior shelves." Recommended load
limit per shelf should not exceed 225 lbs. Optional tray slides may be
purchased in combination with, or in lieu of these. Both standard and optional
interior arrangements are completely installed at the factory.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (selfcontained models only) are provided standard. An optional 2
and labor warranty is also available. In addition the INTELA-TRAUL® controls are
warranted by a two year parts and labor warranty.
®
microprocessor control system is
nd
year extended parts
Equipped With One NEMA 5-15 P Plug
(1 section models only)
Equipped With One NEMA 5-20 P Plug
(2 section models only)
NOTE: Full load amps and plug style may vary depending
on electrical options chosen and condensing unit employed.
In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.
REQUIRED CLEARANCES
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35781 (revised 1/07)
TRAULSEN
SECTION
3-3
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
Website: www.traulsen.com
Loading...