Traulsen RHF232WP-FHS, RHF332WP-FHS, RHF132WP-HHS, RHF232WP-HHS, RHF332WP-HHS General Manual

...
Project Quantity Item #
Model Specied: CSI Section 11400
"W-Width" Pass-Thru
Hot Food Holding Cabinets
®
INTELA-TRAUL
Equipped!
Model RHF132WP-FHS
(shown with optional casters)
Standard Product Features
R-Series: Stainless Steel Exterior & Interior
INTELA-TRAUL® Microprocessor Control System
Ducted Fan Air Distribution System
Standard Operating Temperature Range 135 to 180°F
One-Time Start-Up Temperature Adjustment Feature
ON/OFF Switch Located On Control Face
Full or Half Length Stainless Steel Doors With Locks
Self-Closing Doors With Stay Open Feature At 120 Degrees
Guaranteed For Life Cam-Lift Hinges
Guaranteed For Life Horizontal Work Flow Door Handles
Standard Door Hinging F & R: 132W = Right, 232W = Left/
Right, 332W = Left/Right/Right (other hingings available)
Automatically Activated Incandescent Lights
Stainless Steel Breaker Caps
Three Adjustable Wire Shelves Per Section,
Supported On Pilasters (installed at the factory)
Special Heat Resistant Magnetic Snap-In Door Gaskets
Gasket Protecting Metal Door Liners
Stainless Steel One-Piece Louver Assembly - Front & Rear
9' Cord & Plug Attached (one section models only)
Set of Four (4) 6" High Adjustable Stainless Steel Legs
One Year Parts And Labor Warranty
Two Year Control Warranty (parts and labor)
One, Two & Three Section Models, 32" Deep
1-Section Full Length Door Model RHF132WP-FHS
R
SERIES
Stainless Exterior
& Interior
A
SERIES
Stainless Exterior,
Anodized Alumi-
num Interior
In addition to the already outstanding cabinet construction you have come to expect from Traulsen, these dependable pass-thru hot food holding cabinets are built using our high performance ducted fan air distribution system. Unl ike designs whi ch simply rad ia te heat, this minimizes temperature stratication inside the cabinet, while providing for quicker daily start-up, lower energy usage, and reduced lifetime service costs. Each is supplied standard with easy to operate microprocessor controls, stainless steel exteriors, and are communications capable.
2-Section Full Length Door Model RHF232WP-FHS 3-Section Full Length Door Model RHF332WP-FHS 1-Section Half Length Door Model RHF132WP-HHS 2-Section Half Length Door Model RHF232WP-HHS 3-Section Half Length Door Model RHF332WP-HHS
1-Section Full Length Door Model AHF132WP-FHS 2-Section Full Length Door Model AHF232WP-FHS 3-Section Full Length Door Model AHF332WP-FHS 1-Section Half Length Door Model AHF132WP-HHS 2-Section Half Length Door Model AHF232WP-HHS 3-Section Half Length Door Model AHF332WP-HHS
Options & Accessories
Re-Hinging Feature For Door(s)
No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Pans
No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Pans No. 3 Type Tray Slides To Accommodate (2) 12" x 20" Pans
No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Pans (chrome rod type, equips 1/2 section)
Universal Type Tray Slides To Accommodate Either (1)
18" x 26" or (2) 14" x 18", or (2) 12" x 20" Pans
Additional Wire Shelves
Locking Hasps (padlocks supplied by others)
115/60/1 Voltage (single section models only)
Export 220/50/1 Voltage
Stainless Steel Shelves In Lieu of Standard Wire
Kool Klad Exterior Laminate Decor
Set of Four (4) 6" High Casters In Lieu of Legs
Set of Four (4) 4-5/8" High Casters In Lieu of Legs
4-1/2" High Stainless Steel Base In Lieu of Legs
6" High Stainless Steel Kickplate (for use with standard legs)
Prison/Correctional Facilities Options
Clear Glass Door(s) In Place Of One Or More Solid Door(s)
Two Year Service/Labor Warranty Available
Listed by Underwriters Laboratories Inc., to U.S. and Canadian safety standards and Listed by NSF International.
TRAULSEN 4401 BLUE MOUND RD. FT. WORTH, TX 76106 PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302 Website: www.traulsen.com
Approval: _______________________________________
Project Quantity Item #
Model Specied: CSI Section 11400
Specications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 nish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabi­net top and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included.
Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work ow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal
corners.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Both the cabinet and doors are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA R/AHF132WP R/AHF232WP R/AHF332WP
Net capacity cu. ft. 26.1 (739 cu l) 55.8 (1581 cu l) 83.2 (2357 cu l)
7
Length - overall in. 29
Depth - overall in. 37
⁄8 (75.9 cm) 58 (147.3 cm) 861⁄8 (218.8 cm)
15
⁄16 (96.4 cm) 3715⁄16 (96.4 cm) 3715⁄16 (96.4 cm)
Depth - over body in. 32 (81.3 cm) 32 (81.3 cm) 32 (81.3 cm)
3
Depth - doors open 90° in. 83
1
Clear door width in.
211⁄8 (53.6 cm) 211⁄8 (53.6 cm) 211⁄8 (53.6 cm)
Clear half-door height in. 27
Clear full-door height in. 57
Height - overall on 6" legs 83
2
RHF Net Wt. lbs.
AHF Net Wt. lbs.
345 (156 kg) 585 (265 kg) 1040 (488 kg)
2
295 (134 kg) 505 (229 kg) 785 (356 kg)
⁄8 (211.8 cm) 833⁄8 (211.8 cm) 833⁄8 (211.8 cm)
1
⁄2 (69.9 cm) 271⁄2 (69.9 cm) 271⁄2 (69.9 cm)
5
⁄8 (146.3 cm) 575⁄8 (146.3 cm) 575⁄8 (146.3 cm)
1
⁄4 (211.5 cm) 831⁄4 (211.5 cm) 831⁄4 (211.5 cm)
No. Standard Shelves 3 6 9
3
Shelf area sq. ft.
18.8 (1.75 sq m) 37.6 (3.49 sq m) 56.4 (5.23 sq m)
ELECTRICAL DATA
Voltage 208/115/60/1 208/115/60/1 208/115/60/1
Feed wires with Ground 4 4 4
Wattage @ 208V 1500 3000 3000
Full load amperes @ 208V 7.8 15.5 15.5
SHIPPING DATA
Length - crated in. 35 (89 cm) 63 (160 cm) 91 (231 cm)
Depth - crated in. 43 (109 cm) 43 (109 cm) 43 (109 cm)
1
Height - crated in. 83
⁄2 (212 cm) 831⁄2 (212 cm) 831⁄2 (212 cm)
Volume - crated cu. ft. 71 (2011 cu l) 131 (3711 cu l) 189 (5354 cu l)
NOTE: Figures in parentheses reect metric equivalents. 1= Please note that the available cabinet width narrows for 5-3/8" from the top of the door frame to 20-1/8" i n order to allow for the heater fans. 2= For shipping weights and dimensions please refer to form TR35875. 3= Area of standard shelf compliment only, does not include storage area of additional shelves or available
on cabinet bottom.
NOTES
Heating System
A low watt density, serpentine style, heater is employed for the generation of electric heat. Low velocity air is forced across its large surface area to efciently move heat radiating away from these through a down-air distribution duct, where it is then evenly distributed throughout the cabinet, assuring the proper holding environment for hot food product, without drying. A vent, located at the top of the cabinet, is included for positive humidity control.
Controller
The easy to use, water resistant INTELA-TRAUL is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, ON/OFF Button, Fahrenheit or Celsius Temperature Scale Display Capability, One-Time Start-Up Temperature Adjustment Feature, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open and Power Supply Interruption.
Interior
Standard interior arrangements include three (3) wire shelves per section, mounted on pilasters. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory.
Warranties
A one year parts and labor warranty is provided standard. An optional 2 extended parts and labor warranty is also available. In addition the INTELA-TRAUL® control is warranted by a two year parts and labor warranty.
Elevation -
R/AHF132WP
Elevation -
R/AHF232WP
Plan - R/AHF132WP
®
microprocessor control system
Elevation -
R/AHF332WP
Plan - R/AHF232WP
nd
year
Equipped With One NEMA L14-20P Plug
(one section models only)
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any ad­ditional warranties.
Continued product development may necessitate specication changes without notice.
Part No. TR35793 (revised 12/10)
TRAULSEN 4401 BLUE MOUND RD. FT. WORTH, TX 76106 PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302 Website: www.traulsen.com
Plan - R/AHF332WP
Section - All Models
Loading...