Traulsen ADT132EUT-HHS General Manual

Project Quantity Item #

Model Specied: CSI Section 11400

"Extra Wide" Reach-In Refrigerator-Freezer

Models/Self-Contained

Includes Traulsen's patented

INTELA-TRAUL® control

Model RDT132EUT-HHS

(shown with optional casters)

Standard Product Features

• R-Series: Stainless Steel Exterior & Interior

• A-Series: Stainless Steel Exterior/Anodized Aluminum Interior

• INTELA-TRAUL® Microprocessor Control System

• Balanced, Self-Contained Dual Refrigeration Systems Using

R-134a & R-404A Refrigerants

• Half Length Stainless Steel Doors With Locks

• Self-Closing Doors With Stay Open Feature At 120 Degrees

• Guaranteed For Life Cam-Lift Hinges

• Guaranteed For Life Horizontal Work Flow Door Handles

• Standard Door Hinging: 132EW = Right (other hingings

available)

• Automatically Activated Incandescent Lights

• Stainless Steel Breaker Caps

• Adjustable Wire Shelves (installed at the factory)

• Bottom Mounted Electric Condensate Evaporator

• Magnetic Snap-In Door Gaskets

• Gasket Protecting Metal Door Liners

• Controllable Anti-Condensate Door Perimeter Heaters

• Thermostatic Expansion Valve Metering Device

• Stainless Steel One-Piece Louver Assembly

• 9' Cord & Plug Attached

• Set of Four (4) 6" High Adjustable Stainless Steel Legs

• One Year Parts And Labor Warranty

• Two Year Control Warranty (parts and labor)

• Five Year Compressor Warranty

One Section Models, 32" Deep

R

SERIES

Stainless Exterior

& Interior

A

SERIES

Stainless Exterior,

Anodized Alumi-

num Interior

The R & A Series represent Traulsen's Top-of-the-Line product offering. The
“Extra Wide” reach-in refrigerator/freezer models are all designed to offer
maximum interior storage capacity. Each is supplied standard with such high
quality features as balanced refrigeration systems, microprocessor controls,
communications ability and stainless steel exteriors. Additionally, they of­fer the widest range of optional accessories to choose from, and can be

specied for use with many different applications, including: Foodservice,

Correctional, Institutional, Export, etc.

1-Section Half Length Door Model RDT132EUT-HHS

1-Section Half Length Door Model ADT132EUT-HHS

Options & Accessories

• Stainless Steel Finished Back With Rear Louvers

• Additional Wire Shelves

• Locking Hasps (padlocks supplied by others)

• No. 1 Type Tray Slides To Accommodate Either (1) 26" x 18"

Meat Lug or (1) 18" x 26" Sheet Pan (lengthwise) Per Pair

• Chrome Plated Shelves to Fit Tray Slides

• Stainless Steel Shelves

• Kool Klad Exterior Laminate Decor

• Set of Four (4) 6" High Casters In Lieu of Legs

• Set of Four (4) 4-5/8" High Casters In Lieu of Legs

• 4-1/2" High Stainless Steel Base In Lieu of Legs

• 6" High Stainless Steel Kickplate (for use with standard legs)

• Prison/Correctional Facilities Options

• Remote Applications (see spec sheet TR35837 for details)

• Water Cooled Self-Contained Condenser Suitable For

Connection To Glycol

• Two Year Service/Labor Warranty Available

Equipped With One NEMA 5-15 P Plug

NOTE: Full load amps and plug style may vary depending on
electrical options chosen and condensing unit employed.

Listed by Underwriters Laboratories Inc.,
to U.S. and Canadian safety standards and
Listed by NSF International.

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

Approval: __________________________________

Project Quantity Item #

Model Specied: CSI Section 11400

Specications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed

of 20 gauge stainless steel with #4 nish. Cabinet interior and door liners are

constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabi­net top, back and bottom are constructed of heavy gauge aluminized steel. A set of four
(4) adjustable 6" high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal,
glide hinges with stay open feature at 120 degrees. Hinges include a concealed
switch to automatically activate the interior incandescent lighting. Guaranteed for

life, work ow door handles are mounted horizontally over recess in door which limits

protrusion from door face into aisleways. Doors have seamless, polished metal
corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA R/ADT132EUT

Net capacity total cu. ft. 23.6 (654 cu l)

Net capacity refrig. cu. ft. 11.8 (327 cu l)

Net capacity freezer cu. ft. 11.8 (327 cu l)

Length - overall in. 331⁄4 (83.1 cm)

Depth - overall in. 35 (88.8 cm)

Depth - over body in. 32 (81.3 cm)

Clear door width in. 261⁄2 (66.3 cm)

Clear half-door height in. 2713⁄16 (69.5 cm)

Clear full-door height in. n/a
Height - overall on 6" legs 831⁄4 (211.5 cm)

No. Standard Shelves 2

ELECTRICAL DATA

Voltage 115/60/1

Feed wires with Ground 3

Full load amperes 10.7

REFRIGERATION DATA

Refrigerant - Refrigerator R-134a

Refrigerant - Freezer R-404A

BTU/HR H.P. - Regerator1 1130 (1⁄5 HP)

BTU/HR H.P. - Freezer1 1440 (1⁄3 HP)

SHIPPING DATA

2

Length - crated in. 40 (100 cm)

Depth - crated in. 43 (109 cm)

Height - crated in. 831⁄2 (212 cm)

Volume - crated cu. ft. 83 (2351 cu l)

RDT Net Wt. lbs. 455 (206 kg)

RDT Gross Wt. lbs. 545 (247 kg)

ADT Net Wt. lbs. 405 (184 kg)

ADT Gross Wt. lbs. 495 (225 kg)

NOTE: Figures in parentheses reect metric equivalents.

1= Based on a 90 degree F ambient and 20 degree F evaporator for the refrigerated
section and a 90 degree F ambient and -20 degree F evaporator for the freezer
section.
2= For approximate remote weights deduct 40 lbs. from respective net or gross
weight. For other information on remote models, please refer to spec sheet
TR35837.

NOTES

Refrigeration System

A top mounted, self-contained, balanced refrigeration system using R-134a and
R-404A refrigerants is conveniently located behind the one piece louver assembly.
These models feature interior mounted coils and a bottom mounted condensate
evaporator.

A 9' cord and plug is provided standard. Standard operating temperatures are 34 to
38°F for the refrigerator compartment and 0 to -5°F for the freezer compartment.

Controller

The easy to use water resistant INTELA-TRAUL® microprocessor control system
is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required
for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, and an RS485 data port. In addition it
includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean
Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Sup­ply Interruption. A separate control is provided for both the refrigerator and freezer
compartments.

Interior

Standard interior arrangements include two (2) wire shelves, one per compart­ment, mounted on shelf pins. Recommended load limit per shelf should not
exceed 225 lbs. Both standard and optional interior arrangements are completely
installed at the factory.

Warranties

Both a one year parts and labor warranty and a ve year compressor warranty (self-

contained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available. In addition the INTELA-TRAUL® controls are
warranted by a two year parts and labor warranty.

In order to assure optimum performance, the condensing unit MUST have an adequate supply
of air for cooling purposes. Therefore, the operating location must either have a minimum of 12”

clearance overhead of the condensing unit or allow for unrestricted air ow at the back of the unit.

Clearance of at least 12” above is required in order to perform certain maintenance tasks.

REQUIRED CLEARANCES

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any ad­ditional warranties.

Continued product development may necessitate specication changes without notice.

Part No. TR35848 (revised 4/10)

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com